1/20
Flashcards covering braking systems, disc vs drum brakes, hydraulics, anti-skid, wheel and tire components, maintenance checks, and aquaplaning case study.
What is the main goal of an aircraft's braking system?
To help slow down the aircraft during the landing roll.
What are the two main components of an aircraft braking system?
A rotating component (drum or disc) and a non-rotating friction component (brake pad or shoe).
The drum-type braking unit has a drum inside the rotating wheel, and a non-rotating expandable tube or brake shoe inside the drum. When braking is required, the expandable component comes in contact with the inside of the rotating drum, causing friction that __ the aircraft.
slows the aircraft
In a disc-brake system, what parts interact to slow the aircraft?
Brake pads in the caliper press against the rotating disc to create friction and slow the aircraft.
Why are carbon discs used on larger or high-performance aircraft?
They operate better at the high temperatures generated during heavy braking.
How can larger aircraft improve braking performance beyond a single disc per wheel?
By having multiple disc units on each wheel.
What does an independent hydraulic braking system look like in small aircraft?
Each brake has its own self-contained system, including a master cylinder, a braking cylinder, and hydraulic tubing.
What role does the master cylinder play in brake systems?
When the brake pedal is pressed, it acts as a hydraulic pump, sending pressure through the system.
What is the park brake?
A feature that holds hydraulic pressure on the piston to keep the brakes applied when parked.
What is a boosted braking system?
A system that adds extra hydraulic pressure from the main hydraulic system to assist braking, especially during heavy braking.
What is a power braking system?
A system where all braking pressure is provided by the main hydraulic system.
What is the anti-skid unit and how does it function?
It senses wheel speed and momentarily releases hydraulic pressure to prevent wheel lock-up and skidding.
How does the anti-skid unit determine a risk of wheel lock-up?
By comparing the wheel's rotational speed to the aircraft's speed; if the wheel is too slow, pressure is released.
What is the difference between a wheel and a tire?
The wheel is the metal component connected to the undercarriage; the tire is the rubber part that contacts the ground.
What materials are commonly used for wheel construction, and which is avoided for larger aircraft due to fire risk?
Aluminum alloy is common; magnesium is lighter but has fire risk at high braking temperatures, so it's not normally used on larger aircraft.
What is the difference between tubed and tubeless tires?
Tubed tires have an inner inflatable tube; tubeless tires seal directly against the wheel without an inner tube.
What is a thermal plug and why is it used in tires?
A safety feature that melts at a high temperature to deflate the tire and reduce the risk of a blowout.
Why should pilots check tire creep marks during preflight?
To ensure the stationary tire does not rotate excessively on touchdown, which could compromise the inflation valve.
What is tire tread and why is it important?
The rubber pattern on the tread that improves braking and ground maneuverability; insufficient tread can increase wear and hydroplaning risk.
What is aquaplaning (hydroplaning) in aviation?
A condition where water under the tire prevents effective braking, causing the aircraft to skid across the runway.
Case study: Boeing 747 aquaplaning incident (23 September 1999).
In heavy rain, aquaplaning reduced braking effectiveness to about one-third, the aircraft overran the runway and stopped in grass; all evacuated.