1/56
Looks like no tags are added yet.
Binary alloy
An alloy that contains two components.
Brittle fracture
No or little plastic deformation with less energy absorption before fracture.
Cleavage
The successive and repeated breaking of atomic bonds along specific crystallographic planes.
Components
The elements (e.g., Cu, Ni) or compounds which are present in the alloy.
Continuous cooling of eutectoid iron-carbon alloy at a rate higher than 140C/s results in
100% martensite.
Cooling rates less than 35C/s results in
100% pearlite.
Crack initiation
A small crack is formed.
Crack propagation
Crack advances incrementally with each stress cycle.
Creep
The time-dependent and permanent deformation of materials when subjected to a constant load or stress.
Critical resolved shear stress
The minimum shear stress required to initiate slip and is a property of the material that determines when yielding occurs.
Dislocation density
The total dislocation length per unit volume.
Dislocation motion
Slip.
Ductile fracture
Substantial plastic deformation with high energy absorption before fracture.
Edge dislocation
The dislocation line moves in the direction of the applied shear stress.
Equilibrium cooling
Cooling occurs very slowly (efficient atom diffusion in both liquid and solid is allowed).
Equilibrium phase diagram
A diagram of the relationships between temperature, the compositions, and the quantities of the phases at equilibrium.
Fatigue
The progressive and localized structural damage that occurs in structures subjected to dynamic and fluctuating stress.
Fatigue life
Used to categorize fatigue behavior.
Fatigue strength
Used to specify a fatigue response.
FCC and BCC metals
Have a large number of slip systems.
Final failure
Occurs rapidly once the advancing crack has reached a critical size.
The formation of _ in continuous cooling can only be accomplished using alloy steel
Bainite.
Four strategies to strengthen metallic materials
Grain size reduction, solid-solution alloying, precipitation strengthening, and strain hardening.
Fracture toughness
Measure of a material's resistance to brittle fracture when a crack is present. The amount of energy per unit volume that a material can absorb before rupturing.
Heterogeneous nucleation
Much easier since stable 'nucleating surface' is already present — e.g., mold wall, impurities in liquid phase — only very slight supercooling (0.1-10ºC).
Homogeneous nucleation
Nuclei form in the bulk of liquid metal, requires considerable supercooling.
_ is formed when either pearlite or bainite is heated to and held at 700C for 18-24 hours
Spheroidite.
Metals having large grains
Have good creep resistance at relatively high temperatures.
Metals having small grains
Are relatively strong and tough at low temperatures.
Methods to improve fatigue life
Shot peening and steel alloying (carburizing or nitriding).
Multicomponent alloy
An alloy that contains more than two components.
Nonequilibrium cooling
Cooling occurs quickly (no efficient atom diffusion, especially in solid phase).
Nucleation
Nuclei (seeds) act as templates on which crystals grow.
Phase
A homogeneous part or aggregation of the material that differs from another part due to a difference in structure, composition, or both.
Plane strain
When the specimen thickness is much greater than the crack dimension, there is no strain component perpendicular to the front and back faces.
Principle for metal strengthening
Restricting or hindering dislocation motion renders a material harder and stronger.
Recrystallization
The formation of a new set of strain-free and equiaxed grains that have low dislocation density and are characteristic of pre-cold-worked condition.
Repeated stress cycle
Maximum and minimum stresses are asymmetrical relative to the zero stress level.
Reversed stress cycle
The stress alternates from a maximum tensile stress to a maximum compressive stress of equal magnitude.
Rotating bending test
Alternating tension and compression stresses of equal magnitude to a specimen as it simultaneously bent and rotating.
Screw dislocation
The direction of the dislocation motion is perpendicular to the stress direction.
Slip direction
Direction of movement on the slip plane.
Slip plane
The crystalline plane along which the dislocation line transverses.
Slip system
Combination of slip plane and slip direction.
Smaller grain size
Results in more grain boundaries and therefore more barriers to slip.
Solubility limit
The maximum concentration of solute atom that may dissolve in the solvent to form a solution.
Solute
An element or compound present in a minor concentration.
Solvent
The element or compound that is present in the greatest amount.
Spheroidite has a microstructure composed of _ particles embedded in an alpha phase matrix.
Spherelike.
Strain hardening (cold working)
A ductile material becomes harder and stronger as it is plastically deformed.
Supercooling (or undercooling) (eutectic, eutectoid)
Liquid is cooled below freezing point without turning into a solid.
Superheating (peritectic)
Liquid is heated beyond boiling point without turning into a vapor.
Surface free energy
Destabilizes the nuclei (it takes energy to make an interface).
Ternary alloy
An alloy that contains three components.
Three annealing stages
Recovery, recrystallization, grain growth.
The transformation to spheroidite is caused by additional
Carbon diffusion.
Volume (Bulk) free energy
Stabilizes the nuclei (releases energy).