Untitled Flashcard Set

Binary alloy

An alloy that contains two components

Brittle fracture

No or little plastic deformation with less energy absorption before fracture

Cleavage

The successive and repeated breaking of atomic bonds along specific crystallographic planes

Components

The elements (e.g., Cu, Ni) or compounds which are present in the alloy

Continuous cooling of eutectoid iron-carbon alloy at a rate higher than 140C/s results in

100% martensite

Cooling rates less than 35C/s results in

100% pearlite

Crack initiation

A small crack is formed

Crack propagation

Crack advances incrementally with each stress cycle

Creep

The time-dependent and permanent deformation of materials when subjected to a constant load or stress

Critical resolved shear stress

The minimum shear stress required to initiate slip and is a property of the material that determines when yielding occurs.

Dislocation density

The total dislocation length per unit volume

Dislocation motion

Slip

Ductile fracture

substantial plastic deformation with high energy absorption before fracture

Edge dislocation

The dislocation line moves in the direction of the applied shear stress

Equilibrium cooling

Cooling occurs very slowly (efficient atom diffusion in both liquid and solid is allowed)

Equilibrium phase diagram

A diagram of the relationships between temperature, the compositions, and the quantities of the phases at equilibrium.

Fatigue

The progressive and localized structural damage that occurs in structures subjected to dynamic and fluctuating stress.

Fatigue life

Used to categorize fatigue behavior

Fatigue strength

Used to specify a fatigue response

FCC and BCC metals

Have large number of slip systems

Final failure

Occurs rapidly once the advancing crack has reached a critical size

The formation of _ in continuous cooling can only be accomplished using alloy steel

Bainite

Four strategies to strengthen metallic materials

Grain size reduction, solid-solution alloying, precipitation strengthening, and strain hardening

Fracture toughness

Measure of a material's resistance to brittle fracture when a crack is present. The amount of energy per unit V that a material can absorb before rupturing.

Heterogeneous nucleation

- much easier since stable "nucleating surface" is
already present — e.g., mold wall, impurities in
liquid phase
- only very slight supercooling (0.1-10ºC)

Homogeneous nucleation

Nuclei form in the bulk of liquid metal, requires considerable supercooling

_ is formed when either pearlite or bainite is heated to and held at 700C for 18-24 hours

Spheroidite

Metals having large grains

Good creep resistance at relatively high temperatures

Metals having small grains

Relatively strong and tough at low temperatures

Methods to improve fatigue life

Shot peening and steel alloying (carburizing or nitriding)

Multicomponent alloy

An alloy that contains more than two components

Nonequilibrium cooling

Cooling occurs quickly (no efficient atom diffusion, especially in sold phase)

Nucleation

Nuclei (seeds) act as templates on which crystals grow

Phase

A homogeneous part or aggregation of the material that differs from another part due to a difference in structure, composition, or both.

Plane strain

When the specimen thickness is much greater than the crack dimension, there is no strain component perpendicular to the front and back faces.

Principle for metal strengthening

Restricting or hindering dislocations motion renders a material harder and stronger

Recrystallization

The formation of a new set of strain-free and equiaxed grains that have low dislocation density and are characteristic of precold-worked condition

Repeated stress cycle

Maximum and minimum stresses are asymmetrical relative to the zero stress level.

Reversed stress cycle

The stress alternates from a maximum tensile stress to a maximum compressive stress of equal magnitude

Rotating bending test

Alternating tension and compression stresses of equal magnitude to a specimen as it simultaneously bent and rotating.

Screw dislocation

The direction of the dislocation motion is perpendicular to the stress direction

Slip direction

Direction of movement on the slip plane

Slip plane

The crystalline plane along which the dislocation line transverses

Slip plane

Plane on which easiest slippage occurs

Slip system

Combination of slip plane and slip direction

Smaller grain size

Results in more grain boundaries and therefore more barriers to slip

Solubility limit

The maximum concentration of solute atom that may dissolve in the solvent to form a solution

Solute

An element or compound present in a minor concentration

Solvent

The element or compound that is present in the greatest amount

Spheroidite has a microstructure composed of _ particles embedded in an alpha phase matrix

Spherelike

Strain hardening (cold working)

A ductile material becomes harder and stronger as it is plastically deformed

Supercooling (or undercooling) (eutectic,eutectoid)

Liquid is cooled below freezing point without turning into a solid

Superheating (peritectic)

Liquid is heated beyond boiling point without turning into a vapor

Surface free energy

Destabilizes the nuclei (it takes energy to make an interface)

Ternary alloy

An alloy that contains three components

Three annealing stages

Recovery, recrystallization, grain growth

The transformation to spheroidite is caused by additional

Carbon diffusion

Volume (Bulk) free energy

Stabilizes the nuclei (releases