1/23
Comprehensive vocabulary flashcards covering measuring instruments, including PMMC, moving iron, electrodynamometer instruments, damping methods, shunts, multipliers, wattmeters, energy meters, and digital meters.
Damping Torque
The torque necessary to avoid oscillation of an instrument's moving system about its final deflected position owing to the inertia of moving parts.
Air Friction Damping
A damping method where a light aluminium piston moves inside a fixed air chamber closed at one end; rapid motion compresses the air, generating pressure that opposes the piston's motion.
Fluid Friction Damping
A damping system where light vanes attached to the spindle are submerged in a pot of damping oil so that motion is opposed by fluid friction; used in electrostatic type instruments.
Eddy Current Damping
The most efficient form of damping, based on the principle that moving a conducting, non-magnetic sheet through a magnetic field induces eddy currents that create an opposing force.
Permanent Magnet Moving Coil (PMMC) Instrument
An instrument with a coil wound on an aluminium former placed in the magnetic field of permanent magnets; it provides a uniform scale and is used exclusively for direct current (DC) measurements.
PMMC Deflecting Torque Equation
Td=NBIA, where N is the number of turns in the coil, B is the magnetic flux density, I is the current in amperes, and A is the coil area.
Phosphor Bronze Hair Springs
Two springs in a PMMC instrument that serve a dual purpose: providing controlling torque (Tc=Kθ) and conducting current into and out of the moving coil.
Attraction Type Moving Iron Instrument
An instrument in which coil current creates a magnetic field that pulls a piece of moving iron from the weaker field outside into the stronger field inside the coil; used to measure alternating current (AC) quantities at power frequency (50Hz).
Moving Iron Deflection Relationship
θ∝I2, derived from the equilibrium relation θ=2KI2dθdL, which causes the scale of a moving iron meter to be non-uniform.
Electrodynamometer Type Instrument
An instrument similar to a PMMC instrument in which the permanent magnet is replaced by an air-core electromagnet to eliminate hysteresis errors, suitable for both AC and DC operation.
Electrodynamometer Deflecting Torque (AC)
Td=I1I2cos(ϕ)dθdM, where I1 and I2 are the RMS values of the alternating currents, ϕ is the phase angle between them, and dθdM is the rate of change of mutual inductance.
Ammeter Shunt
A low-resistance device connected in parallel with the instrument coil circuit to extend its current-measuring capability by carrying the majority of the line current.
Shunt Resistance Formula
Rsh=m−1Rm, where Rm is the meter coil resistance and m=ImI is the multiplying power of the shunt.
Manganin
The preferred alloy for instrument shunts due to its extremely low temperature coefficient of resistance and low thermoelectric EMF.
Voltmeter Multiplier
A high, non-inductive resistance (Rs) connected in series with a voltmeter coil to increase its voltage range, defined by the relationship Rs=Rm(m−1) where m=VmV.
Current Coil (Wattmeter)
The two fixed coils wound with heavy wire that carry the main load current in an electrodynamometer wattmeter.
Pressure Coil (Wattmeter)
The moving coil connected in series with a high resistance across the load or supply mains in a wattmeter to sample the voltage.
Wattmeter Deflecting Torque
Td=KVIcos(ϕ), indicating that the instrument's deflection is proportional to average electrical power regardless of whether it is connected to an AC or DC circuit.
Induction Type Energy Meter
An integrating instrument universally employed to measure total electrical energy in domestic and industrial AC circuits, reading in kilowatt-hours (kWh).
Shunt Magnet (Energy Meter)
The electromagnet within an induction energy meter's driving system that is energized by the pressure coil connected across the supply voltage.
Series Magnet (Energy Meter)
The electromagnet within an induction energy meter's driving system that is excited by the current coil carrying the load current.
Meter Constant (K)
The rated constant of an energy meter representing revolutions per unit of energy, calculated as K=kWhNo. of Revolutions.
Digital Multimeter (DMM)
A digital meter built around a digital voltmeter that measures voltage, current (AC or DC), and resistance by first converting all measured quantities into an equivalent DC voltage.
Digital Voltmeter (DVM)
An instrument that displays measured AC or DC voltage as discrete numerical values on an LCD display by converting an analog input to digital form via an ADC and counting unit.