Grade 10 Tool Package Practice Flashcards

A set of fill-in-the-blank flashcards covering the Grade 10 Tool Package, including tool names, safety rules, identification criteria, and specific mechanical uses.

Safety Glasses must be worn when hammering, grinding, and/or __________.

using a power tool

A __________ is to be used when working under a vehicle and should not be dropped on the floor.

Creeper

The Bench Vise should not be __________ when it is not in use.

tightened

A __________ is used for grinding or cleaning rust off parts with a wire wheel.

Bench Grinder

While a Floor Jack raises a vehicle, __________ are used to support the vehicle after it is raised.

Safety Stands

The Wheel Balancer, also known as a __________, is used when balancing wheels.

tire balancer

A Tire Machine is used to install and remove a tire on or off of a __________.

rim

The Tool Cart is used to __________ hold tools while working on a vehicle.

temporarily

Number 18 in the tool package, the __________, performs the same job as both the air pressure gauge and the air chuck.

Tire Pressure Gauge and Filler

A Valve Core Remover is used to remove valve cores found in a __________.

tire valve

The Spark Plug Gap Gauge can be either __________ or __________ type, and comes in imperial or metric.

wire and wedge

The __________ is used to measure the freezing and boiling point of engine coolant.

Coolant Strength Tester

A __________ is used to deburr an edge of metal that has been cut or welded, and comes in shapes like round/rat tail, half round, flat, and triangle.

File

The round end of a __________ is used to cut gasket material to size.

Ball-Peen Hammer

One should not use Duck Bill Pliers, Lineman Pliers, or Needle Nose Pliers to __________.

tighten or loosen nuts and bolts

A __________ is the most popular wrench in class; its boxed end breaks a nut loose while the open end is used for speed.

Combination Wrench

The __________ will round hardware if used to tighten or loosen nuts and bolts.

Adjustable Wrench

A Nut Driver similar to a screwdriver can adapt sockets and comes in drive sizes of __________ and __________.

$\frac{1}{4}\text{"}$ and $\frac{3}{8}\text{"}$

According to the notes, the five key points to identify a socket are size, number of points, drive size, color/material, and __________.

depth

Drive sizes for sockets include $\frac{1}{4}\text{"}$ for small bolts, $\frac{3}{8}\text{"}$ for medium bolts, and __________ for large nuts or bolts.

$$\frac{1}{2}\text{"}$$

__________ (black sockets) are to be used on heavy duty torque.

Impact Sockets

A __________ has a mechanism that permits free motion in one direction but lockup in the other to turn sockets.

Ratchet

The three types of Torque Wrenches mentioned are beam, click type, and __________.

dial

The Spark Plug Socket includes a __________ to support the ceramic portion of a spark plug.

rubber grommet

When using a Spark Plug Socket, one must also use a __________.

wobble extension

Compression pressure in a four-stroke engine is measured on the __________ stroke.

third

An Oil Filter Wrench, available in strap and claw styles, should never be used to __________ oil filters.

install

The __________ is used to compress rings when installing a piston and rod assembly into the engine block.

Piston Ring Compressor