1/19
A collection of flashcards covering essential vocabulary and definitions regarding wood properties, types, and terminology used in wood construction and seasoning.
Wood
The tough fibrous cellular substance that makes up most of the stems and branches of trees beneath the bark.
Softwoods
Wood that comes from conifers (evergreens) such as pine trees, which have needles instead of leaves.
Hardwoods
Wood that comes from broad-leaved or deciduous trees; most Philippine timber is classified as hardwood.
Sapwood
The softer, younger outer portion of a tree that is more permeable, less durable, and usually lighter in color than heartwood.
Heartwood
The older, harder central portion of a tree, denser and more durable than sapwood, composed of inactive cells.
Checks
Cracks or lengthwise separations across the annual rings of growth caused by irregular shrinkage during drying.
Shakes
Cracks between and parallel to the annual rings of growth in wood.
Knots
Irregular growths in the body of a tree that interrupt the smooth curve of the grain.
Pitch pockets
Well-defined openings between annual rings containing solid or liquid pitch.
Wane
The lack of wood on the edge or corner of a piece.
Decay
The deterioration of wood caused by the attack of fungi.
Warping
Any variation with the plane surface of the piece caused by unequal shrinkage of the board.
Plainsawing
A method of cutting lumber tangent to the annual rings at an angle of 0° to 45° to create a pleasing pattern.
Quartersawing
Wood cut radially to the annual rings, reducing shrinkage and maintaining tight joints.
Rift sawing
A method where wood is cut at a 30 to 60 degree angle to the center of the timber for better grain orientation.
Kiln dried
Lumber that has been seasoned in a kiln under controlled conditions of heat, air circulation, and humidity.
Dressed Lumber
Lumber that is surfaced with a planing machine to attain a smooth surface and uniform size.
Air-drying
A seasoning method where lumber is exposed to the air to remove moisture.
Kiln-drying
A seasoning method where warm moist air or superheated steam is used to heat wood and remove moisture.
Equilibrium moisture content (E.M.C.)
The moisture content at which the vapor pressure in the air balances the vapor pressure on the wood surface.