Wood Properties and Terminology
WOOD
- Definition: Wood is a tough, fibrous cellular substance that makes up most of the stems and branches of trees beneath the bark.
CLASSIFICATION OF WOOD
- Wood can generally be classified into two types:
- Softwoods:
- Derived from conifers (evergreens).
- Trees have needles instead of leaves.
- Example: Pine.
- Hardwoods:
- Come from broad-leaved or deciduous trees.
- Most Philippine timber consists of hardwoods.
STRUCTURE OF WOOD
Sapwood:
- The softer, younger outer portion of a tree.
- Characteristics:
- More permeable.
- Less durable.
- Usually lighter in color than heartwood.Heartwood:
- The older, harder central portion of a tree.
- Characteristics:
- Denser.
- Less permeable.
- More durable than surrounding sapwood.
- Composed of inactive cells and serves only as a mechanical support.
DEFECTS OF WOOD
- Checks:
- Cracks or lengthwise separations across the annual rings of growth caused by irregular shrinkage during drying.
- Formed when the circumference shrinks more than the interior section of the log. - Shakes:
- Cracks between and parallel to the annual rings of growth. - Knots:
- Irregular growths in the body of a tree that interrupt the smooth curve of the grain.
- Fibers of the tree deviate from their normal course and grow around the knot at that point. - Pitch pockets:
- Well-defined openings between annual rings containing solid or liquid pitch. - Wane:
- Lack of wood on the edge or corner of a piece. - Decay:
- Caused by the attack of fungi. - Warping:
- Any variation with the plane surface of the piece caused by unequal shrinkage of the board.
- Forms of warp:
- Bow
- Crook
- Kink
- Cup
- Twist
METHODS OF SAWING WOOD
- A log of wood can be cut in different ways to make lumber:
- Plainsawing:
- Lumber is cut tangent to the annual rings or growth.
- Cut with rings at an angle of 0° to 45°.
- Preferable for producing pleasing patterns, especially for wall paneling.
- Quartersawing:
- Wood is cut radially to the annual rings of growth, running parallel to the rays.
- Cut with growth rings at an angle of 45° to 90°.
- Has less shrinkage than plainsawn lumber; important for maintaining tight joints.
- Rift Sawing:
- Wood is cut at a 30° to 60° angle to the center of the timber.
- Similar to quartersawing.
LUMBER CLASSIFICATION
- Strips:
- Lumber less than 2" thick and less than 8" wide. - Timber:
- Wood suitable for use as building material. - Lumber:
- Manufactured timber product created through sawing, re-sawing, passing through a planing machine, cross-cutting to length, and grading. - Dressed Lumber:
- Lumber surfaced with a planing machine to achieve a smooth surface and uniform size.
- Examples:
- "S2S": dressed lumber smooth on 2 sides.
- "S4S": dressed lumber smooth on 4 sides. - Rough Lumber:
- Lumber that is sawed, edged, and trimmed but not surfaced. - Kiln Dried:
- Related to lumber seasoned in a kiln under controlled conditions of heat, air circulation, and humidity.
- Also refers to lumber seasoned by exposure to the atmosphere.
WOOD TERMINOLOGY USED IN CONSTRUCTION
- Board:
- Lumber pieces less than 2" thick and at least 8" wide.
- Graded for appearance rather than strength; typically used for sidings and flooring. - Planks:
- Wide pieces of lumber 2" to 5" thick.
- Used for stair stringers and treads, floor girders, roof girts, and trusses. - Dimension Lumber:
- Pieces more than 2" and less than 5" in any dimension.
- Classified for strength rather than appearance; typically used for purlins, joists, and wall framing. - Timbers:
- Pieces 5" or more on the smallest dimension.
SEASONING OF LUMBER
Importance of Seasoning:
- Moisture greatly influences the behavior and properties of wood.
- Moist wood is susceptible to insect and fungal attacks, making it unfit for use.
- Water in wood is found as:
- Free water: Occurs in cell cavities and intercellular spaces.
- Hygroscopic water: Held in the cell walls.Shrinkage:
- Occurs at moisture content percentages below the fiber saturation point.
- Drying continues until the vapor pressure in the air balances the vapor pressure on the wood surface; this balance is known as equilibrium moisture content (E.M.C.).
- In the Philippines, this is equivalent to 12% to 16% moisture content.Seasoning Process:
- The process of removing moisture from green wood (freshly-cut logs) is termed seasoning.
ADVANTAGES OF SEASONED LUMBER OVER GREEN LUMBER
- Lessens susceptibility to attacks by fungi causing blueing and decay, and by wood-boring insects.
- Reduction of weight: More manageable for construction.
- Increased strength: Enhances structural integrity.
- Minimal shrinkage after installation: Prevents gaps in joints of doors, windows, and sidings.
- Reduced checking and warping: Improves durability and appearance.
- Increased nail-holding power: Nails hold better in seasoned wood.
- Improvement for application: Better for paint and the application of wood preservatives and fire retardants.
SEASONING METHODS
- Air-Drying:
- Lumber is exposed to the air for a natural seasoning process. - Kiln-Drying:
- Uses warm moist air or superheated steam to heat the wood and expel moisture.
- Advantages of Kiln-Drying:
- Greater weight reduction.
- Control of moisture content to desired levels.
- Reduction in drying time.
- Killing of fungi or insects present in the wood.
- Setting resins in resinous wood.
- Less degrade (the loss in quality during seasoning due to unequal shrinkage).