Airlaw

If work performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes

Where is the record of compliance with Airworthiness Directives or manufacturers’ service bulletins normally indicated?

After a mechanic holding an airframe and powerplant rating completes a 100-hour inspection, what action is required before the aircraft is returned to service?

Which aircraft record entry is the best description of the replacement of several damaged heli-coils in a casting?

Which maintenance record entry best describes the action taken for a control cable showing approximately 20 percent wear on several of the individual outer wires at a fairlead?

What is ATA iSpec 2200?

For aircraft operated under part 91, which of the following records must be retained for at least one year, or until the work is repeated or superseded?

When work is performed on an aircraft that necessitates the use of FAA Form 337, who should prepare the form?

Which statement is true regarding the requirements for maintenance record format?

Each person performing an annual or 100-hour inspection shall use a checklist that contains at least those items in the appendix of

What is/are the appropriate action(s) concerning minor repairs performed on a certificated aircraft? 1. FAA form 337’s must be completed. 2. Entries must be made in the aircraft maintenance record. 3. The owner of the aircraft must submit a record of all minor repairs to the FAA at least annually.

What is the status of data used as a basis for approving major repairs or alterations for returning to service?

When approving for return to service after maintenance or alteration, the approving person must enter in the maintenance record of the aircraft

Which aircraft record entry best describes the repair of a dent in a tubular steel structure dented at a cluster?

Which maintenance record entry best describes the action taken for a .125-inch deep dent in a straight section of 1/2–inch aluminum alloy tubing?

An aircraft owner was provided a list of discrepancies on an aircraft that was not approved for return to service after an annual inspection. Which of the following statements is/are true concerning who may correct the discrepancies? 1. Only a mechanic with an inspection authorization. 2. An appropriately rated mechanic. 3. Any certified repair station.

Which statement is true regarding the use of FAA Form 337?

An aircraft was not approved for return to service after an annual inspection and the owner wanted to fly the aircraft to another maintenance base. Which statement is correct?

A person installing a product, part, or appliance on a type certificated product must make certain that the item’s records document what type of statement?

A certificated mechanic without an inspection authorization who signs the appropriate block on FAA Form 337 is doing what?

For the aircraft operated under part 91, what difference is there, if any, between the record entry requirements for maintenance (e.g. repair or alteration) and the record entry requirements for inspections (beyond the description of the work performed and the type and extent of inspection)?

Who is responsible for upkeep of the required maintenance records for an aircraft?

Who is responsible for making the entry in the maintenance records after an annual, 100 hour, or progressive inspection?

If more space is needed for a work description entered on FAA Form 337, what information should be included on the attached sheet(s), in addition to the rest of the work description?

An FAA form 337 is used to record and document

After making a certain repair to an aircraft engine that is to be returned to service, an FAA Form 337 is prepared. How many copies are required and what is the disposition of the completed forms?

When a discrepancy list is provided to an aircraft owner or operator after an inspection, it says in effect that

When a 100-hour inspection is completed, if separate maintenance records for the airframe, powerplant(s), and propeller(s) are maintained, where is the entry for the inspection recorded?

During an annual inspection, if a defect is found which makes the aircraft unairworthy, the person disapproving must

For aircraft operated under Part 91, when is the aircraft’s total time required to be recorded in aircraft maintenance records?

Where should you find this entry? ‘Removed right-wing from aircraft and removed the skin from outer 6 feet. Repaired buckled spar 49 inches from tip in accordance with figure 8 in the manufacturer’s structural repair manual No. 28-1.’

In order to reconstruct lost or destroyed aircraft maintenance records, what is it necessary to establish?

What is the means by which the FAA notifies aircraft owners and other interested persons of unsafe conditions and prescribes the condition under which the product may continue to be operated?

Which of the following may a certificated airframe and powerplant mechanic perform on aircraft and approve for return to service? 1. A 100-hour inspection. 2. An annual inspection, under specified circumstances. 3. A progressive inspection, under specified circumstances.

For aircraft operated under Part 91, which of the following records must be retained and transferred with the aircraft when it is sold?