Environmental Science
Pollution
AP Environmental Science
Water Pollution
Human Impacts on Ecosystem
Biodegradable Wastes
Great Pacific Garbage Patch
Persistent Organic Pollutants
Water Quality—Water Testing
Endocrine Disruptors
Wetlands
Mangroves
Bioaccumulation
Biomagnification
Solid Waste Disposal
Hazardous Wastes
12th
Cyanide
________ is intentionally poured onto piles of mined rock to chemically extract gold.
feather oil
Seabirds ingest their _________ while preening, damaging their kidneys and livers.
agglomerations
Dispersants, sorbents, and detergents disperse, absorb, or clump oil into sinking gel-like ________.
photodegrades
As the plastic _____ into smaller and smaller pieces, it remains as plastic polymers leaching toxic chemicals into the upper water column.
disintegrates
As the plastic further _______, it becomes small enough to be ingested by aquatic organisms and birds near the ocean’s surface and eventually enters the marine food chain.
Urban Runoffs
These are the major source of urban flooding and water pollution in urban communities worldwide. It also creates:
High CO2
________ levels also make it difficult for fish to use the limited amount of oxygen present in the water and to discharge the CO2 in their bloodstream.
Low CO2
______ levels also result in a decreased rate of photosynthesis.
Heavy metals
These metals are non-biodegradable and can cause decreased reproductive rates and birth defects.
5.0 to 8.5
Most bodies of water have the highest biological diversity when the pH is near 7, with natural waters having pH values from ________.
5.5 to 6.0
Fresh rainwater may have a pH of ________ due to carbon dioxide dissolving in the water, making a weak carbonic acid solution.
total dissolved solids
High levels of _______ (TDS) can affect water clarity and photosynthesis and lead to a decline in the quality and taste of drinking water.
10-15
Wood can take ______ years to decompose.
10-30 days
Paper decomposes in ______, while glass does not decompose.
1 million
Some plastics can take up to ______ years to decompose.
2-5 months
Cotton and cloth can take _____ to decompose.
Toxic or hazardous
_____ wastes are often exported from developed countries to developing countries.
geologic repositories
Salt dome and bed formations, underground caves, and mines are _________.
100-500 years
Metals decompose in ________.
Water pollution
It is the contamination of water bodies
Point source pollution
Release pollutants from known locations, such as discharge pipes, that are regulated by federal and state agencies
Non-point source pollution
A combination of pollutants from a large area rather than from specific identifiable sources
Thermal Pollution
The degradation of water quality by any process that changes ambient water temperature
Cultural eutrophication
It is the process whereby human activity increases the amount of nutrients entering surface waters
Nitrates
These are water-soluble and are found in fertilizers, which can remain on fields and accumulate, leach into groundwater, or end up in surface runoff and cause algal blooms in surface waters, resulting in decreased dissolved oxygen levels
Phosphates
These are also a component of fertilizers; however, they are not water-soluble, and they adhere to soil particles
Disease-causing microorganisms
Such as bacteria, viruses, and protozoa, can result in swimmers getting sick and shellfish becoming contaminated
Great Pacific Garbage Patch
A large system of rotating ocean currents of marine litter in the central North Pacific Ocean and is characterized by high concentrations of floating plastics, chemical sludge, and other debris that have been trapped by the currents of the North Pacific Gyre
Great Patch
Formed as a result of marine pollution gathered by oceanic currents as the gyres rotational pattern drew in waste material from across the North Pacific Ocean
Persistent Organic Pollutants
These are organic (carbon) compounds that are resistant to environmental degradation through chemical or biological processes or decomposition due to light
Water quality
Refers to the chemical, physical, and biological characteristics of water and is a measure of the condition of the water relative to the requirements of one or more biotic species and/or to any human need or purpose
Water testing
It is a broad description for various procedures that are used to analyze water quality
Alkalinity
It measures the sum of the bicarbonate, carbonate, and hydroxide ions in the water, which raise the pH
Ammonia
When found in natural water, is regarded as an indicator of pollution
Biological Oxygen Demand (BOD)
It gives an approximation of the level of biodegradable waste in water
Carbon Dioxide
Aquatic vegetation, ranging from phytoplankton to large rooted plants, depends upon carbon dioxide and bicarbonates in the water for growth
Dissolved Oxygen (DO)
If its level is too low, it indicates possible water pollution and shows a potential for further pollution downstream because the ability of the stream to self-cleanse will be reduced
Coliforms
These are a form of bacteria that are found in the intestines of warm-blooded animals; their presence in lakes, streams, and rivers is a sign of untreated sewage in the water
Fecal coliforms
They can get into the water from untreated human sewage or from farms and runoff from animal feedlots
Nitrate
This gets reduced to nitrites, which can be harmful to humans and fish
Nitrite
Occurs in water as an intermediate product in the biological breakdown of organic nitrogen being produced either through the oxidation of ammonia or the reduction of nitrate
Phosphates
These are essential nutrients for aquatic plants, but only in very low concentrations
Total hardness
It measures the total concentration of calcium and magnesium ions in the water
Turbidity
It is a measure of how light is scattered in the water column due to solids that do not dissolve but are small enough to be suspended in the water
Absorption
When one substance enters completely into another
Adsorption
When one substance just hangs onto the outside of another
Disinfection
Using chemicals and/or cleansing techniques that destroy or prevent the growth of organisms that are capable of infection
Filtration
Removes clays, natural organic matter, precipitants, and silts from the treatment process
Flocculation sedimentation
A process that combines small particles into larger particles that then settle out of the water as sediment
Ion exchange
Removes inorganic constituents and can be used to remove arsenic, chromium, excess fluoride, nitrates, radium, and uranium
Gland
An organ that secretes particular chemical substances for use in the body or for discharge into the surroundings
Endocrine System
A network of glands that make the hormones that help cells communicate with each other and is responsible for almost every cell, organ, and function in both humans and animals
Endocrine disruptors
These are chemicals that can interfere with endocrine or hormonal systems and can cause behavior, learning and developmental disorders, birth defects, cancerous tumors, and loss of fertility
Bisphenol A (BPA)
Used in plastic manufacturing and epoxy
Dioxins
By-product of herbicide production and paper bleaching, and released during burning wastes and wildfires
Phthalates
Used to make plastics more flexible
Polychlorinated biphenyls (PCBs)
Used to make electrical equipment, heat transfer fluids and lubricants
Wetland
It is a place where the land is covered by water, which can be freshwater, saltwater, or brackish water
Mangrove
A shrub or small tree that grows in slightly salty (brackish) water formed by seawater mixing with freshwater in estuaries
Bioaccumulation
It is the increase in the concentration of a pollutant within an organism
Biomagnification
It is the increasing concentration of a substance in the tissues of organisms at successively higher trophic levels within a food chain
Municipal solid waste (MSW)
More commonly known as trash or garbage-consists of everyday items that are used and then thrown away
Hazardous Wastes
Paints, chemicals, pesticides, etc
Organic Wastes
Kitchen wastes, vegetables, flowers, leaves, or fruits
Radioactive Wastes
Spent fuel rods and smoke detectors
Recyclable Wastes
Glass, metals, paper, and some plastics
Soiled Wastes
Hospital wastes
Microorganisms
Are used to break down biodegradable material and sewage sludge in the absence of oxygen
Incineration
A waste treatment process that involves the combustion of substances contained in waste materials and the conversion of the waste into ash, flue gas, and heat
Global waste trade
It is the international trade of waste between countries for further treatment, disposal, and/or recycling
Ocean dumping
The deliberate disposal of municipal and/or hazardous wastes at sea
Sanitary landfills
Method of waste disposal where the waste is buried either underground or in large piles, and where waste is isolated from the environment until it is safe
Reducing
Lessening the number of hazardous wastes by substituting and using products that are more "Earth-friendly."
Freon®
Its molecular structure contains chlorine, which seriously degrades the stratospheric ozone layer
Puron®
Substitutes fluorine for chlorine, and has less of an impact on the stratospheric ozone layer
Radioactive wastes
Usually a by-product of nuclear power generation and other applications of nuclear fission, such as research and medicine
Low-level radioactive wastes
Contain low levels of radiation and remain dangerous for a relatively short time
High-level radioactive wastes
Contain high levels of radiation and remain dangerous for a very long time
Reactive wastes
These are wastes that are unstable under normal conditions
Source-specific wastes
These are wastes from specific industries
Teratogens
These are substances found in the environment that can cause birth defects
Toxic wastes
These are wastes that are harmful or fatal when ingested or absorbed
Landfill capping
A containment technology that forms a barrier between the contaminated media and the surface, protecting humans and the environment from its harmful effects and limiting its migration
Hazardous waste landfills
Excavated or engineered sites for the final disposal of non-liquid hazardous waste are selected and designed to minimize environmental release
Permanent storage
Isolates hazardous waste from the environment by condensing or concentrating it
Surface impoundments
These are natural topographic depressions, man-made excavations, or diked areas that are used for temporary storage and/or for the treatment of liquid hazardous waste
Injection wells
These stores fluid deep underground in geologically stable, porous rock formations, such as sandstone or limestone, or into or below the shallow soil layer
Waste piles
These are non-containerized piles of solid, non-liquid hazardous waste that are used for temporary storage or treatment
Reduction and cleanup of hazardous wastes
These can occur by producing less waste, converting the hazardous material to less hazardous or nonhazardous substances, and placing the toxic material into perpetual storage
Brownfield
It is land that was previously used for industrial or commercial purposes, may have been contaminated with hazardous wastes, and is commonly found in large urban areas