1/58
Looks like no tags are added yet.
Natural Fibers: Wool
-common fiber type
-soft, resilient, ages well
-expensive, static
Natural Fibers: Silk
-common fiber type
-great luster, flame resistant
-very expensive, not for commercial use
Natural Fibers: Linen
-less common fiber
-strong, dyes well
-can’t be cleaned with water, not flame resistant
Natural Fibers: Cotton
-less common fiber
-soft, dyeable
-wears easy, stains easy, specific cleaning
Natural Fibers: Sisal, Abaca, Seagrass, Jute and Coir
-outdoor use (flat woven, no pile)
-can be dyed
-poor resilience, sun stains, pests, prickly
Synthetic Fibers: nylon
-most durable for abrasion
-resists: mildew, moths, mold
-ugly out before it wears out
-static electricity
Synthetic Fibers: Acrylic
-soft, resilient
-resistant to fading
-low abrasion
-pilling
Synthetic Fibers: Polypropylene (olefin)
-good stain/fade resistance
-inexpensive
-flattens in high traffic
Synthetic Fibers: Polyester
-soft, dyes well
-resists fading
-poor resilience/crushing
Construction Methods: BCF
-long filaments that are piled together to form continuous strands
-nylon, olefin
Construction Methods: staple fiber
-short yarns twisted together into long threads
-polyester, wool, cotton
Construction Methods: weaving
-simultaneous construction of face and backing
-ideal for high traffic
-expensive
Tufting Terminology
-loop pile: level/multilevel
-cut pile: velvet plush/saxony/frieze
-cut-loop: alternating
Construction Methods
-gauge: distance between needles
-stitch rate: number of times a snitch occurs per inch
-pile height: length of a tuft from backing to the top
-face weight: weight of fiber/sq yd in ounces
-density: how closely the fibers are tufted into the backing
Carpet Types: Broadloom
-typically 12’ wide
-variety of backings
-some products aren’t produced in a broadloom format
-consider:
-pattern match
-dye lot match
Carpet Types: Modular Carpet Tile
-cut from broadloom
-18” or 36” squares (also planks)
-easy to replace
-variety of backings:
-adhesive, peel and stick, loose laid
Pre-dye Methods
Solution:
-”soup”
-locks in color
-fade-resistant
-bleach cleanable
Skein
-yarns are dyed after spinning
-expensive
Stock
-dyed before spinning
Space
-random color distribution
-multicolored visual texture
Post-dye Methods
Beck
-dyed after tufting
-before secondary backing
Piece
-dyed after secondary backing
Continuous
-rinsed and passed under dye applicator
Printing
-sprayed from ink jet printers
Differential
-chemically treated to react differently to dye (baths)
Carpet Backing: Primary
-tufts insert into
-options:
-jute
-cotton
-polypropylene (most common)
Carpet Backing: Secondary
-puddle of latex spread on the back of the primary backing
-dimensional stability
Carpet Padding
Rebond
-most common
-scraps of furniture foam chopped and bonded together
-various thickness+densities
Waffle Rubber
-thickness is mostly air
-too soft—breaks down with use
Slab Rubber
-doesn’t contain ripples of air
-resists furniture crushing for longer
Foam
-various thicknesses + densities
-dense=goof support
-less dense=cushion
-new or recycled options
Fiber (natural)
-jute, hair, synthetic fiber, recycles textiles
-expensive
-low toxicity
(firm padding=less strain on backing, soft padding=face crushes less, always check manufacturers recommendation)
Installing Broadloom
Wall to wall
-requires seaming diagrams
Tackless
-stretched to strips of wood with prongs
Glue down
-glued directly to floor
Installation
Stairs
-waterfall
*gap under lip of the stair
-hollywood
*completely flush
Carpet Tile
-loose or glue down
-avoid skinny slivers at the perimeter
-always check with manufacturer (specify layout)
Adjacent Materials
-get floor height to line up (floating)
-transition strip
Sequence
Select carpet
Scaled plans sent to supplier for bid
Yardage+labor estimate
Tested Properties
-Flammability (pill test, should self extinguish)
-smoke density
-tuft bind (amount of force needed to pull loop out of carpet)
-abrasion (fuzzing+pilling)
-breaking strength (how many pounds before yarn ruptures)
-colorfastness (measures effects of light)
-static (3 kilovolts=commerical, 5 kilo=residential)
-delamination (amount of force needed to separate primary+secondary backings)
-green label (carpet+adhesive meet low emission concerns)
Stone Technical Terms
Slab
-stone pieces
*5’x8’ size
*1.75”-2.25” thick
Variation
-stone appearance can vary from one lot to next
*same slab
*same stone species
Hardness
*how hard a stone is in relationship to other stones
Sedimentary
-built up over time
*limestone
*standstone
Metamorphic
-heat and pressure
*slate, marble, quartz
Finishes
-tumbled
-polished
-chiseled
-honed and filled
-flamed
-leathered
-sandblasted
-hammered
Common Types
Granite
-crystalline structure
-hard, dense, resists heat and cold
Soapstone
-tough, durable, resists heat
Marble
-veined appearance
-softer than granite, sensitive surface
Serpentine
-dense, green-black
-can warp with moisture if too thin
Travertine
-dense limestone
-cross-cut has holes (filled with resin or grout)
-linear texture/pattern
Tile
consider:
-material type
-absorption
-finish (glazed or unglazed)
-variation codes
-trim
-grout
-coefficient of friction
-spec data
Common Types
Slate
-cleft face
-can chip or be ground smooth
-hard+soft, soaks up stains
Limestone
-soft, etched by acid
-durable building material
Quartzite
-hardest category of natural stone
-course, crystalline appearance
Onyx
-translucent varieties
-polished finish
Penetrating Sealant
-protective formula applied to the surface of all stones
Types
-penetrating (soaks into body of stone)
-topdressing (forms a skin on surface of stone)
Care
-enhanced (protect against UV color, re-applied periodically)
-re-applied periodically
-cleaning
Material Types
Clay
-mined from earth
-various minerals (porcelain, quarry+ceramic)
Glass
Stone
-different from slabs (length, width, thickness)
Concerete
-poured into tiles
Metal
-solid or fused to sub-straight (porcelain or clay)
Composition
-combo of cement and aggregate (varying size + thickness)
Ceramic+Porcelain
Ceramic Tile:
-made from clay
-non-porcelain
-clay, minerals and water
Porcelain Tile
-type of clay
-own category
-fine-grained clay
-feldspar content make it more impervious to moisture
Tile Types
Glass Tile
-integral color
-clear, translucent, iridescent
-sensitive to drastic temps
-many sizes
Stone Tile
-often 1/4”-3/8” thickness
-tight grout joints
-see sealing instructions
Concrete
-many sizes and color
-imitate other materials
-sealed against staining
-cured by hardening
-embedded materials
Glazed vs unglazed
Glazed
-impervious to water/stains
-similar to glass
-slippery on floor
-finish options: crackle, bright, clear, crystal, matte
Unglazed
-relies on quality of body for color
-hard to clean
-grout+dirt
-can stain
Specifications
-variation
-trim
-grout
-COF
Spec Data
-abrasion (visible abrasion resistance, PEI)
-absorption (water)
-COF (coefficient of friction)
-hardness (MOHS hardness scale)
-variation (tone)
Brick Sizes
Dimensional
-full brick
-sizes vary between diff manufacturers
Veneer
-applied like a tile (thinner)
-durable, long-lasting, more economical, lightweight
-not structural, no thermal properties
Pavers and mortar
Pavers
-floors
-horizontal applications
-thinner than wall/vertical brick
-size+tile size varies
Mortar
-joint profiles—grout for tile
-visual preference (concave, weathered, flush)
Metal Terms
-alloy: metal made by combining 2 or more metallic elements
-oxidize: when metal combines wit oxygen
-galvanized: coat (iron or steel) with a protective layer of zinc
-corrode: destroy or damage slowly by chemical action
-extrude: to shape, by forcing material through a die
-gauge: metal thickness
-plating: applying one metal to another
-coating: material applied to metal
Ferrous Metals
Cast Iron
-high compression strength, but brittle
-good for stair components
Wright Iron
-soft+easily workable
-corrosion+fatigue resistant
-pipes for welding
Steel
-iron+carbon (more corrosion resistant)
Stainless Steel
-iron+carbon (+nickle or chromium)
Non-Ferrous Metals
Aluminum
-soft
-corrosion resistant
-light+hard to weld
Zinc
-bright, silver
-corrosive in water
-sheeting/surface material
Copper
-good strength
-corrosion resistance
-naturally oxidizes
Brass
-copper+zinc
-interiors
-no extrusions
Bronze
-copper+aluminum
-can be extruded, oxidize in air
Non-Ferrous Metals
Chromium
-alter other metals’ characteristics
-plating (nickle+chrome)
Pewter
-tin-based, soft, malleable
Titanium
-corrosion resistance
-light but strong
Forming Metals
-sheets
-plates (thick sheets)
-cast (molten glass)
-pipes+tubes (cut+weld)
-extruded
-spun
-welding (fused tg: heat)
-soldering (fused tg: heat+other materials)
-weaving (like textile)
Coating Types
-patinas (like a dye)
-baked enamel or porcelain
-powder-coat (poured into tiles)
-anodizing (coating for aluminum)
-wax (problem: wrinkling, cracking, runs, drips)
Glass Ingredients+Characterstics
-quartz sand+heat
-function or decor (glass can be altered to improve properties for specific use)
-impervious to staining and scratching
-safety (can provide safety depending on type of glass)
-glass can have diff light transmittance, strength, energy efficiency, and fire resistance
-largest=12’ wide
Common Types of Glass
Float
-molten glass solidified on metal plate
Unealed
-process of glass cooling
Tempered
-rapid heating and cooling
Laminated (glass bound by plastic or resin)
Terrazzo Composite: Aggregate
-traditional terrazzo uses marble
-visit showroom to make visible selections
-plastics, mirrors, glass, wood, or other materials can meet needs for durability
-can vary in size
Terrazzo Composite: Characteristics
-depends on used materials
-different systems require different thicknesses and installation
-maintenance for cement-plus-stone options is the baseline
-floors may need to be stripped, fixed and refinished
Terrazzo Composite: Binder
-cementitious: cement and water
-modified cementitious: polyacrylic modified cement
-resinous epoxy: synthetic thermosetting polymers containing epoxide groups
-can be pigmented
Terrazzo Composite: Control Joints
-”divider strips”
-help prevent cracking
-separate sections (color or pattern)
Concrete Admixtures
-fly ash (burning coal recycled, helps with workability)
-air-entraining (introduces air, durability in freezing temps)
-accelerants (decrease setting time, speed up curing)
-retardants (increase setting time, slowing down hydration)
-glass fibers (reduces small surface cracks)
Forms
Precast
-cast as tiles
-cast as a specific form being installed
Surface
-poured in place
-structural or non-load-bearing
-vertically (poured down into a form)
-can be lined with textures
-28+ days cure time
Finish Textures (concrete+terrazzo)
-stamped
-polished
-aggregate
-formed edges
-salt-sandblasted
-acid etched
Important Types of Resilient Flooring
Linoleum
-natural materials and oxidized linseed oil (thick cement and pine resin and wood flour)
-jute backing
-biodegradable
-easy to clean
Cork (from trees)
-anti-static
-sound absorbing
-insulated
Vinyl
-VCT (vinyl composite)
-LVT (luxury vinyl)
-Inlaid (chips attached to a backing)
-sheet
Rubber
-synthetic (mostly)
-seams can be welded
-recycled options
Wood: Soft vs Hard
Softwood
-needle-like or scale-like trees (cedar, cypress, fir, pine)
Hardwood
-broadleaf trees (ash, birch, oak, poplar)
Types of Hardwood
Solid
one piece that’s milled from lumber (variety of widths+thickness)
3/4”
”thin profile”
stapled or glued down
can be installed over concrete
Engineered
- 3-10 layers/piles
peace, core, back
most expensive
cross ply construction
Acrylic Infused
-files and supports cell structure
-2x as resistant
Types of “Plywood”
What
-layers of wood glued or otherwise united with the grains parallel to form boards or timbers (laminated wood)
Types
-industrial particleboard
-medium density fiberboard (MDF)
-veneers
-combinations
Veneers
-decorative laminates
-vinyl films
-foils
-cuts:
plain sliced
quarter sliced
rift sliced
rotary sliced
Other Wood Considerations
Color+Stain
-color through natural wood and/or satin color applied on top of wood’s natural color
Installation
-nail or stable
-glue down
-floating and glue
-interlocking
Finishes
-UV urethane
-oil
-wax
-waterborne
-acid-cured
Interface Carpet
-Nylon dyeing (yarn dye vs solution dyed)
-fiber profile (shape of fiber matters to wear and durability of carpet)
Tufting styles
-tip sheared: opened loops ends
-textured loop: different loop heights
-level loop: no high/lows/shear
Pricing
-measured by SQ YD
Face Construction Terms
-primary backing—tufted through
-cut pile
-secondary backing—applied on back
-pile height
-gauge —left>right
-stitch rate—front>back
Density Formula
-density=(face weight x 36)/pile height