1/78
Looks like no tags are added yet.
Which sensors are used in IMU?
Accelerometers, gyroscope, magnetometers
If power and wavelength are equal antenna w/ shortest range?
Omni-directional
Which of the following is a Digital Elevation Model representing the earth's surface void of vegetation and structures?
Digital Terrain Model
The acronym SAR refers to which of the following active remote sensing payloads that can see through clouds?
Synthetic Aperture Radar
Using lightweight and composite materials and airfoils w/ high aspect ratios will help an aircraft achieve what?
Higher Endurance
What data links enable BLOS operations?
TRUST, Comply w/ see and avoid, Multiple data links
Density altitude affects the visibility of the pilot
False
Operational planning is an aspect of staffing and HR management
False
The earth's atmosphere w/ a variety if gases causes which remote sensing effects?
Absorption, Refraction, Scattering
Infrared payloads are constructed similarly to RGB w/ what exceptions
The semiconductor material is different
Which of the following are classification systems used for regulating UAS?
GTOW, Kinetic energy
Describing the shape of a wings cross section?
Airfoil
Aviation uses G forces to measure which of the following?
Load
Emissivity compares the thermal remittance of an object to which of the following?
Black body
What is the primary role of the human in an RPAS?
Safety and reliability
Which of the following types of IR payloads capture absolute temp measurements?
Radiometric IR
What level of autonomy describes a vehicle that can perform tasks under limited conditions?
LOA 3
Which of the following are common architecture components shared by all robots?
Electronic systems, Mechanical structure, Software
Which frequency bands are commonly used in RPAS?
S Band, L Band, C Band, Ku Band
The Ground Data Terminal provides communication w/ airborne systems equipped w/ a data link
True
Metric that can be used to assess system reliability?
MBTF
Altitude airspace and real time video feeds are commonly displayed on a primary flight display
False
Lidar measures distances between the sensor and the object of reference and can generate 3d maps and models
True
Geometric correction in remote sensing ensures accurate georeferencing , corrects distortion and inaccuracies, and removes unwanted objects from the dataset
False
Air density decreases w/ increasing temperature causing performance to decrease
True
Radiance in remote sensing is energy emitted by the sensor
False
What advantage does a directional antenna have over omni directional?
Transmission over longer distances
Which components are in a GCS?
Radio transmitter/receiver, computer, monitor
Which of the following have limited growth of the UAS regulations?
Low flying aircraft traffic management, The rapid pace of technological advancement, VFR See and Avoid requirements
Lower frequency carrier waves can carry more information
False
Frequency modulation involves encoding information into a carrier wave by varying the amplitude, amount of energy carried by the wave
False
What part of a GCS is also a hardware component of the data link?
Ground Data Terminal
Which of the following has the primary function of automating the air vehicles flight control?
Flight Control Computer
Adding an overweight payload to an RPAS can adversely affect performance in what ways?
Diminished controllability, Higher stall speed, Poor rate of climb, Reduced maneuverability
Radiometric correction involves adjusting the brightness and color values of data
True
A combustion engine generates thrust by accelerating a stream of air or fluid in the direction opposite to its rotation
False
Which of the following types of accuracy refers to the accuracy of spatial data with respect to real world coordinates?
Geometric Connection
Control surfaces like ailerons, rudders, and elevators perform which of the following tasks?
Control the aircrafts movement and attitude
A “data link budget” helps telecommunication engineers determine the transmitted signal's frequency.
False
LIDAR works similarly to Radar, except it uses which of the following to detect and calculate range?
Laser light
A ______ is a type of UAS that combines the features of both rotor and fixed-wing systems.
Hybrid VTOL
Reducing human exposure to hazardous environments can be classified as what type of work?
Dirty
What aspect of an air vehicle is affected by the placement of the payload or fuel weight anywhere other than at the center of gravity?
Stability
Which of the following battery types has the highest energy density?
Lithium Polymer (LiPo)
Ground Sample Distance is a measurement of what type of resolution?
Spatial
The Human Machine Interface (HMI) in a ground control station is used to control flight and interact with remotely piloted aircraft.
True
Which remote sensing payloads capture data from several (hundreds) contiguous spectral bands at narrow bandwidth intervals?
Hyperspectral
Which of the following data links would enable Beyond Line-of-Sight Operations?
Iridium SATCOM, Directional Antennas, Omni-Directional Antennas, Airborne relay
Which of the following components converts rotational energy into electrical energy?
Alternator
A “data link budget” helps telecommunication engineers determine the transmitted signal's frequency.
False
Spatial resolution is impacted by the sensor’s field of view and the aircraft’s height above the ground.
True
The Human Machine Interface (HMI) in a ground control station is used to control flight and interact with remotely piloted aircraft.
True
A closed-loop control system adjusts the control output based on the difference between the desired and measured outputs.
True
Which payload is considered passive in data capture?
Not LiDAR or radar
Thrust is the aerodynamic force created by the airfoil.
False
Dead reckoning is different from ground reference navigation in that dead reckoning uses known landmarks to maintain course, whereas ground reference uses direction and speed of travel.
False
A control interface and data storage devices are typical of what?
Hardware found in GCS
A Digital Surface Model (DSM) represents the surface of the Earth and provides details about elevation, slope, and aspect.
False
Dead reckoning is a navigational technique that estimates the aircraft’s position based on which of the following?
Direction and speed of travel
The Ground Data Terminal (GDT) provides communication with airborne systems equipped with a datalink.
True
Which of the following operating concepts uses multiple data links to extend the range of an air vehicle?
Beyond Line of Sight
Aviation uses G forces to measure which of the following?
Not altitude, speed, or attitude
Position Dilution of Precision (PDOP) is a measurement of precision associated with which of the following?
GPS
Stability is an airfoil's tendency to return to a state of ____ after a perturbation.
Equilibrium
The term “telemetry” in reference to RPAS means real-time transmission of data from the air vehicle to the control station.
True
Weather conditions and obstacles are environmental challenges that fall into which environmental domains?
Operational
Clouds are white because of Mie scattering.
True
Frequency Modulation involves encoding information into a carrier wave by varying the amplitude, amount of energy carried by the wave.
False
Which of the following types of infrared payloads capture absolute temperature measurements?
Radiometric
In remote sensing, correction algorithms are implemented to:
To reduce atmospheric effects
Sky Wave Reflection occurs when radio waves below ____ bounce off charged particles in the Earth’s ionosphere.
Not 50 GHz
A ______ is a type of UAS that combines the features of both rotor and fixed-wing systems.
Powerlift
Aerial application of pesticides by RPAS is beneficial because it reduces the amount of pesticide needed.
True
Which of the following is NOT a role that a control station can serve?
Relay for extended visual line of sight data links
Air density decreases with increasing temperature, causing aircraft performance to increase.
False
Selecting a payload sensor that can “see” infrared electromagnetic radiation means the operator is concerned with what type of resolution?
Spectral
Air density decreases with increasing temperature, causing aircraft performance to decrease.
True
What type of closed-loop system adjusts the output of a process based on the difference between the desired output (the setpoint) and the measured output?
proportional-integral-derivative control
Radiometric correction involves adjusting the brightness and color values of data.
True