1/62
Looks like no tags are added yet.
What is training load?
broadly defined as the amount of work done
The weight being lifted
What is a repetition?
the act of performing a movement for a single cycle
e.x. one descent plus one ascent of a squat
What is a set?
a group of repetitions (reps) done in a row with no rest bw them
What is fatigue
the inability to maintain a given work rate (power)
What is the repetition-volume calculation?
sets x reps
What is the volume-load calculation?
sets x reps x weight
How would you calculate work or training load?
sets x reps x weight x concentric distance
work needs a disatnce
e.x. a squat moves the bar farther than a bench press, so it does more work at the same volume load
repetition volume; volume load; work for 5×5 @ 200 lb
25 repetitions;
5000 lb volume load;
10000 ft* lb for work
repetitin volume; volume load work for 3×10 @ 165 lb
30 reps;
4950lb volume load;
9900 ft*lb work
repetition volume; volume load; work for 2×20 @ 125 lb
40 repetition volumes; 5000 lb volume load;
10000 ft* lb for work
What is qualitative load?
relative intensity ——- and it decides adaptation
how heavy the weight is for that person, such as %1RM, an RM, or RIR. It decides which biomotor quality you train.
What is quantitative load?
all the formulas (repetition-volume, volume-load, & work or training load)
note: distinguish qualitative/quantitative load with qualitative/quantitative variation from the training theory lecture.
can we calculate work
we cannot—- but do know calculate work requires a distance
what is fatigue
the inability to maintain a given work rate (power);
A heavy set of 5 needs more rest before you can repeat that work rate, which is the link to rest periods.
What does 1RM stand for?
1-repetition maximum
What is the relationship between %1RM and the repetitions performed?
the higher the %1RM, the lower the amount of repetitions that can be performed
--> inversely related!
If your training goal was strength, then what would be the load (%1RM) and the goal repetitions?
- Load = greater than or equal to 85
- Goal Reps = less than or equal to 6
If your training goal was power for a single-effort event, then what would be the load (%1RM) and the goal repetitions?
- Load = 80-90
- Goal Reps = 1-2
If your training goal was power for a multiple-effort event, then what would be the load (%1RM) and the goal repetitions?
- Load = 75-85
- Goal Reps = 3-5
If your training goal was hypertrophy, then what would be the load (%1RM) and the goal repetitions?
- Load = 67-85
- Goal Reps = 6-12
If your training goal was muscular endurance, then what would be the load (%1RM) and the goal repetitions?
- Load = less than or equal to 67
- Goal Reps = greater than or equal to 12
what is the relationship be %1RM vs. reps chart
%1RM and possible reps are inversely related
multiple- rep maxes
A program can be built on a 3RM, 6RM, or 10RM (tested or estimated) instead of a 1RM. APRE works this way.
True or False: the force-velocity relationship occurs prominently in strength training athletes
FALSE; it occurs in ALL athletes
force- velocity curve
As movement velocity goes up, force goes down.
Power goes up as resistance comes down, but only up to a point. There's an optimal velocity for peak power.
The curve is different for every movement.
What happens when you train for power?
the power potential increases as the resistance decreases...initially
What are the two points of varying the training load?
- important for optimal recovery
- allows for the other aspects of the training plan
how to apply for variation of training load
A 3RM target could mean strength or power; the %1RM and exercise choice tell you which. His example week keeps the same goal but changes the load: Monday heavy (95%), Wednesday light (80%), Friday medium (90%). Reasons:
You cannot train heavy too often; recovery matters.
It leaves room for sport practice, conditioning, and speed/change-of-direction sessions.
It ties back to the variation principle: a stimulus that never changes stops producing overload.
What is the 2-by-2 rule?
if the athlete completes 2 or more reps over the prescribed count on the last set, for 2 consecutive weeks (or sessions), increase the load.
what is the increase range for 2-2 rule
increase should range bw 2.5-10% depedning on athlete training age and movement
Increase: 2.5–5% (his words; the slide says 2.5–10%). Novices can take bigger jumps. Upper vs. lower body changes the size of the jump.
the hidden assumption for 2-2 rule
it is the plus set
The last set is done as many reps as possible. Example: 3×10 at 200 lb. Sets 1 and 2 are 10 reps. On set 3 the athlete goes to failure: 9 or 10 reps means the load is right; 12 or more for 2 weeks in a row means increase.
3×10 came from: created the first set-and-rep scheme to rehab soldiers wounded in war (he said WWI). Everything was built around 3 sets of 10, with a submaximal set, a maximal set, and a third set that depended on the set before. That is why "3×10" is the default people still reach for. The part people forgot is the autoregulation: not every set was a maximal set of 10.
What is volume?
an umbrella term that covers repetition-volume, volume-load, and work or training load calculations
what is aurtoregulated prgressiove resistance exercise (APRE)
1) goals differ, so you should not always do 10 reps;
2) ppl struggle to know when to change the load. Autoregulated: the athlete’s performance decides the load automatically, with no judgment call by the coach. It handles good dats, bad days, and maladaptation.
If your training goal is strength, then how many sets would you aim for?
2-6
goal reps: less than 6
If your training goal is power for a single-effort event, then how many sets would you aim for?
3-5
goal reps: 1-2
If your training goal is power for a multiple-effort event, then how many sets would you aim for?
3-5
goal reps: 3-5
If your training goal is hypertrophy, then how many sets would you aim for?
3-6
goal reps: 6-12
If your training goal is muscular endurance, then how many sets would you aim for?
2-3
goal reps: greater than 12
routine from the goal
3RM or 6RM = strength (and 3RM for power); 10RM = hypertrophy or muscular endurance (or a total beginner training everything).
memorize 2-by-2 rule in shorts
after two weeks;
only increases;
fixed prescription + plus set;
no;
2.5-5%
memorize APRE in shorts
every session, even bw sets;
increases, holds, or decreases;
estimated RM + AMRAP performance;
yes, lowers the load;
5-15 lb by table
E.X. for APRT
an athelets’ estimated RM is 200 lb and they want strength
Warm-up 1: 10 reps × 100 lb (50% of 200).
Warm-up 2: 6 reps × 150 lb (75% of 200).
Working set 1: AMRAP at 200 lb.
They got 3 over the goal (9 reps). 9 is in the 8–12 band, so raise 5–10 lb: set 4 = 205 or 210 lb.
On set 4 they got 1 under the goal (5 reps). 5 is in the 5–7 band, so leave it: the new 6RM next session = 205 or 210 lb (whatever set 4 used).
—————If you chose the 3RM routine instead: warm-ups are 6 × 100 lb and 3 × 150 lb, working set 1 is AMRAP at 200 lb. 6 reps (3 over) falls in 5–6, so set 4 = 205–210 lb. If set 4 then gets 2 reps (1 under), 2 falls in 1–2, so lower 5–10 lb. Same story, different answer, which is why you must always check which routine's column you are in.
Which RT goal requires the least volume?
power
low reps and sets stuck in the middle (3-5)
Which RT goal offers the most variability in optimal volume?
strength
in optimal volume, because much of the research used untrained subjects. Low end of 2–6 for novices, high end for advanced.
Which RT goal requires the most volume?
hypertrophy
--> has the highest repetition-volume!
more work tends to mean more size.
higher reps* more sets = the highest repetition volume
Which RT goal requires the highest number of repetitions but not sets?
muscular endurance
it has the most reps per set but the fewest sets (2-3)
what is rest periods
The heavier and more neural the goal, the longer the rest. Rest periods are the time dedicated to recovery between sets and exercises; this lecture means mostly between sets.
If your training goal is strength, then what would your rest period be?
2-5 minutes
If your training goal is power for a single-effort event, then what would your rest period be?
2-5 minutes
If your training goal is power for a multiple-effort event, then what would your rest period be?
2-5 minutes
If your training goal is hypertrophy, then what would your rest period be?
30 seconds to 1.5 minutes
If your training goal is muscular endurance, then what would your rest period be?
30 seconds or less
why rest periods
strength and power need the most neural drive, muscle activation and force, so they need the most recovery. Hypertrophy may use other mechanisms helped by shorter rest
His caveats (know them, but answer with the NSCA table): newer meta-analyses suggest full recovery (2–5+ min) may be better for hypertrophy. He "wholeheartedly" disagrees with short rest for endurance, since cutting rest just means training an unrecovered athlete. "You're gonna need to know these rest periods for the exam" anyway.
What is the origin behind the 3x10 scheme/Progressive Resistance Exercise (PRE)?
it was made by a doctor who treated WWII veterans; 3 sets of 10 reps, each set with progressed load
What are multiple rep maximums for?
they can serve as the base for programs
example: APRE for 6RM, 10RM, and 3RM
What does 1RM mean?
the maximum amount of weight you can lift for only one single repetition
Should you build one set or more for one’s training status
Novice: 1–2 sets can be enough stimulus (after a proper ramp warm-up).
Intermediate and advanced: 1 set is most likely insufficient.
Example from class: a novice doing 1×5 daily adapts at first, but after a month the same set stops working. The stimulus must change to keep overloading.
session density = total volume / session time (more volume in less time)
so what kinds of sets they have in the session density
Cluster set: several submaximal mini-sets with short rest before a longer rest. Example: 5×2 at 85% 1RM with 30 s rest, instead of 1×5 at 85%.
Drop set: at failure (or just before), lower the weight and keep going in the same set.
The method in order for goal tables
Identify the goal from the scenario's clues (sport, season, what the athlete wants).
Set the load first (%1RM or RM) — intensity decides the adaptation.
Set reps and sets from the table.
Adjust for training status: novice = low end of sets (1–2 can work); intermediate/advanced = more sets; out of shape = more rest.
Set rest from the table, longer if the athlete is deconditioned or the load is relatively heavy.
Vary the load across the week (heavy / light / medium) to allow recovery and other training.
Choose a progression method: APRE (preferred) or the 2-by-2 rule.
Check the numbers: compute repetition volume and volume load if asked.
e.x. a basketball player in the off-season wants a stronger squat
Strength: ≥85% 1RM, ≤6 reps, 2–6 sets, 2–5 min rest. Intermediate status, so 4×5 at 85% is reasonable. Repetition volume = 20; with a 300 lb 1RM, 85% = 255 lb, volume load = 4 × 5 × 255 = 5,100 lb. Progress with APRE 6RM.
e.x. a beginner wants to get bigger
Hypertrophy: 67–85% 1RM, 6–12 reps, 3–6 sets (a novice can start low), 30–90 s rest. Example 3×10 at about 70%. APRE 10RM fits, and suits a novice whose technique is not ready for heavy loading.
a shot-putter (single- effort power)
80–90% 1RM, 1–2 reps, 3–5 sets, 2–5 min rest. Power is the least-volume goal, so don't pile on sets.
emerging methods
