1/44
Looks like no tags are added yet.
In order to form a loop in a rope:
Select one:
a. create a tight bend in the running end.
b. cross the side of a bight over the standing part.
c. further bend one side of a round turn.
d. simply bend the rope back on itself while keeping the sides parallel.
B
How should a natural fiber rope be cleaned?
Select one:
a. Soaked in a bleach solution
b. Wiped or gently brushed
c. Washed with warm water and detergent
d. Washed with cold water and no cleaning solvents
B
In order to eliminate the danger of the working end of a rope from slipping back through a knot, tie a(an):
Select one:
a. overhand safety knot.
b. clove hitch.
c. figure-eight.
d. water knot.
A
The running part of a rope is the end used for:
Select one:
a. tying the knot.
b. hoisting or pulling.
c. a tag line.
d. impact loading.
B
A half-hitch is a knot that is:
Select one:
a. forming a bight.
b. always combined with another knot or hitch.
c. used to tie ropes of equal diameters together.
d. used for life safety applications.
B
To hoist a pike pole with rope, start by tying a clove hitch near the butt end of the handle, followed by a half-hitch in the middle of the handle and:
Select one:
a. another half-hitch around the head.
b. then tie a second rope to the head.
c. raise the pike pole with the pike up.
d. raise the pike pole with the pike down.
A
Life safety rope at a rescue incident should be used for:
Select one:
a. designating control zones.
b. stabilizing objects.
c. lifting victims and rescuers.
d. hoisting and lowering tools and equipment.
C
Block creel construction is the only construction method suitable for:
Select one:
a. synthetic fiber rope.
b. webbing.
c. life safety rope.
d. utility rope.
C
For rope to be reused in life safety situations, it must:
Select one:
a. be able to withstand a certain amount of heat and flame.
b. have no exposure to chemicals or materials that can deteriorate it.
c. NOT be stored in rope bags.
d. have its impact load tested.
B
To hoist a rotary or chain saw, tie a _____ through the closed handle, and attach the tag line through the handle.
Select one:
a. figure-eight
b. figure-eight on a bight
c. figure-eight bend
d. figure-eight follow-through
D
What is one of the safety guidelines for hoisting tools and equipment?
Select one:
a. Use a tag line to help hoist a heavy object.
b. Do not hoist a charged hoseline.
c. Use the hand-over-hand method to maintain control of the rope.
d. Avoid hand-carrying tools and equipment up stairs or a ladder when hoisting equipment is available.
C
When using rope or webbing to stabilize an object, responders should ensure:
Select one:
a. attachment points at both ends will easily pull free, if necessary.
b. rope or webbing and anchor point are strong enough to hold the weight of the object.
c. only life safety rope is tied to the stationary object so it does not snap.
d. personnel are stationed in the stabilizing area in case the rope or webbing snaps.
B
Life safety rope uses _____ construction while all other types of rope construction are used for utility ropes.
Select one:
a. figure-eight
b. kernmantle
c. laid
d. braided
B
Which type of knot would be used as a stopper knot so rope will not pass through a rescue pulley or the grommet of a rope bag?
Select one:
a. Figure-eight
b. Water knot
c. Half-hitch
d. Clove hitch
A
What is one guideline for ensuring a rope remains in good condition?
Select one:
a. Store rope in tight spaces.
b. Do not whip or tape cut the ends of rope.
c. Reverse the ends of the rope in rope bag periodically.
d. Periodically walk on the rope to extend its elasticity.
C
In order to help ensure a rope maintains its condition and reaches its life expectancy, the rope should:
Select one:
a. not be stored at fire department facilities.
b. be kept in a heated area.
c. be placed in a storage bag.
d. be removed from its reel before it is stored.
C
When rot is discovered on a natural fiber laid rope, the rotten rope and any surrounding ropes must be:
Select one:
a. removed from service and destroyed.
b. washed with water and a light detergent.
c. downgraded to utility rope.
d. removed from service and cleaned and reinspected.
D
The figure-eight bend is used primarily:
Select one:
a. for joining two pieces of webbing or the ends of the same piece of webbing when a loop is needed.
b. to stabilize long objects that are being hoisted.
c. on life safety rope to tie ropes of equal diameters together.
d. for securing objects.
C
When might a clove hitch be tied in a rope?
Select one:
a. To join two pieces of webbing
b. When it will be subjected to repeated loading and unloading
c. When attaching a rope to an object
d. Life safety applications
C
Life safety rope is designed:
Select one:
a. to be used as utility rope, if needed.
b. for rescue and other emergency operations only.
c. for securing unstable objects.
d. to cordon off areas and create a control zone perimeter.
B
A tag line used for hoisting operations:
Select one:
a. must be a separate line that is tied to the equipment.
b. can prevent tools from spinning or snagging.
c. is meant to be the load-bearing part of the rope.
d. must be the same line as the hoisting line.
B
What is one way that braided rope differs from laid rope?
Select one:
a. Braided rope is commonly used as utility rope, while laid rope is used for life safety applications.
b. Braided rope is less likely to twist during use than laid rope.
c. Most braided ropes are made of natural fibers, while laid rope is made of synthetic fibers.
d. Braided rope is more vulnerable to direct abrasion and damage than laid rope.
B
When establishing the perimeter to control access to required control zones, responders should use:
Select one:
a. life safety rope.
b. utility rope.
c. webbing.
d. rope that has been placed out of service.
B
Dressing a knot means to:
Select one:
a. tighten it slightly, while still leaving some slack.
b. temporarily tie a knot that can be undone by simply pulling on it.
c. tighten it until snug and remove all slack.
d. connect it to a stationary object or webbing.
C
What would be an appropriate use for dynamic kernmantle rope?
Select one:
a. Hoisting equipment with a high-impact load
b. A belay line for hoisting applications
c. A rappelling line for responders
d. Hoisting victims
B
What would likely cause rope to be removed from service and destroyed?
Select one:
a. Rope that has gotten wet
b. Mildew or mold on the rope
c. Metal shavings or wood splinters in the rope
d. Impact load on a rope
C
For use in the fire service, a knot must:
Select one:
a. be supported by an overhand safety knot or hitch.
b. create a tight bend in the rope.
c. be easy to tie and untie.
d. bear the weight on the standing part of the rope.
C
Which type of knot is preferred for joining two pieces of webbing or the ends of the same piece of webbing when a loop is needed?
Select one:
a. Figure-eight on a bight
b. Figure-eight follow-through
c. Half-hitch
d. Water knot
D
What tools or equipment are prohibited from being hoisted with rope and webbing?
Select one:
a. SCBA cylinders
b. Ladders
c. Charged hoselines
d. Power saws
A
When washing synthetic fiber ropes,:
Select one:
a. do not use water, as it will damage rope.
b. dry the rope immediately after with a heated dryer.
c. use warm water and a mild detergent.
d. use bleach and warm water.
C
Utility rope that is used to hoist equipment, secure unstable objects, or cordon off an area:
Select one:
a. must be removed from service if subjected to an impact load.
b. does not require regular inspection.
c. may be downgraded life safety rope.
d. has specific NFPA standards addressing its use.
C
Flat or tubular webbing that is used in the fire service is:
Select one:
a. intended for utility purposes only.
b. made of the same materials used for synthetic rope.
c. not required to meet any NFPA standards.
d. not commonly used for rescue applications.
B
Lumps on a braid-on-braid rope indicate:
Select one:
a. damage to the core.
b. the rope has been overloaded.
c. damage to the sheath.
d. rot and mildew.
A
Synthetic fiber ropes:
Select one:
a. lose their strength when they get wet.
b. are only permitted for life safety ropes.
c. have a longer life span than natural fiber ropes.
d. are prone to mildew and mold.
C
In order to create a mechanical advantage during hoisting operations, use a:
Select one:
a. pulley.
b. Halligan tool.
c. tag line.
d. pike pole.
A
A rope log:
Select one:
a. should only come in hard copy format so it can be kept with the rope bag.
b. only indicates a rope's usage, not its age.
c. helps determine when rope should be removed from service.
d. is required for both life safety and utility ropes.
C
Which type of webbing do firefighters prefer for rescue work?
Select one:
a. Spiral weave tubular
b. Natural fiber flat
c. Edge-stitch tubular
d. Synthetic flat
A
Which figure-eight knot is used for securing objects?
Select one:
a. Figure-eight follow-through
b. Figure-eight on a bight
c. Figure-eight round turn
d. Figure-eight bend
A
Which is a characteristic of braid-on-braid rope?
Select one:
a. It has a sheath.
b. It resists abrasion much better than other types of rope.
c. It has a braided core that runs the length of the rope.
d. It is not jacketed.
C
If an initial inspection of a rope shows contamination or soiling,:
Select one:
a. remove the rope from service and destroy it.
b. clean the rope in a front- or top-loading clothes washing machine.
c. wash the rope with warm water and a mild detergent.
d. use a stiff bristled brush to remove loose surface debris and grime.
D
What is one of the advantages of using natural fiber rope?
Select one:
a. It has excellent resistance to water, mildew, mold, rotting, and shrinkage.
b. It chars rather than melts when exposed to heat.
c. It can be used for both life safety applications and utility purposes.
d. It can withstand a larger impact load than synthetic rope.
B
Which type of knot should be used to hoist a ladder?
Select one:
a. Clove hitch
b. Half-hitch with an overhand safety knot
c. Figure-eight on a bight
d. Figure-eight follow-through
C
Which part of rope is used to tie a knot?
Select one:
a. Standing part
b. Tag end
c. Running part
d. Working end
D
When inspecting synthetic laid rope:
Select one:
a. untwist all sides so each strand can be inspected.
b. put a slight tension on the rope while feeling for lumps, depressions, or soft spots.
c. feel for soft spots on the outer sheath.
d. check to see if core fibers have been misaligned.
A
To determine if there is damage on a kernmantle rope,:
Select one:
a. check the rope log to determine how often it has been used.
b. check the elasticity of the rope.
c. untwist the rope strands so that each can be inspected.
d. put a slight tension on the rope while feeling for lumps, depressions, or soft spots.
D