Fluid Power Mod 12: Pneumatic System Compression and Control

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/33

encourage image

There's no tags or description

Looks like no tags are added yet.

34 Terms

1
New cards

Bellow

_______ vacuums cups have a concave surface and are used to lift objects that are not perfectly aligned.

2
New cards

500,000

Centrifugal air compressors are capable of producing up to _______ cfm of airflow.

3
New cards

rodless

A _______ cylinder has a cartridge attached to a piston that slides back and forth within the cylinder barrel.

4
New cards

rotary vane

A _______ air compressor uses an offset rotor in a cam ring to create the increasing and decreasing volumes needed for airflow.

5
New cards

safety

A _______ valve is normally closed pressure control valve that is not adjustable and is used as over pressure protection on pneumatic components.

6
New cards

double acting

A _______ cylinder uses compressed air to move the piston in both directions.

7
New cards

110; 120

Depending on the demand of the pneumatic system, receiver safety valves can be found with preset pressure of _______ psi or _______ psi.

8
New cards

Diaphragm

_______ relief valves are typically installed in systems where there is a large volume of airflow.

9
New cards

receiver

The duty cycle for most compressors is based on the size of the _______.

10
New cards

to control the air being sent to different parts of the facility

The advantage of having multiple compressors in smaller decentralized loops is that it is easier _______.

11
New cards

3,000; 12,000

The prime mover in a pneumatic system normally rotates the rotor of a rotary-screw air compressor at speeds between _______ rpm to _______ rpm.

12
New cards

metering valve

A _______is a pneumatic flow control valve that controls the amount of airflow through a specific line at a given time.

13
New cards

100

Most industrial facilities with pneumatic systems attempt a maximum duty cycle of _______% for their compressors.

14
New cards

centrifugal

A _______ air compressor is a type of dynamic air compressor that uses an impeller rotating at high speed to compress air.

15
New cards

spring return

A single-acting, _______ cylinder holds the rod in a retracted position with spring pressure when no airflow is applied.

16
New cards

radial piston

A(n) _______ air motor operates at low speed an high torque with its pistons vertical to the shafts.

17
New cards

32/46 synthetic compressed oil

Synthetic oil used in pneumatic systems must be in compliance with ISO Standard _______.

18
New cards

muffler

A(n) _______ is a device that is attached to an exhaust port of a pneumatic directional control valve to deaden the noise of air as it exhausts.

19
New cards

pressure

A(n) _______ switch electrically controls the energizing or de-energizing of a prime mover when a set pressure has been reached.

20
New cards

relief

_______ valves protect systems from overpressure by setting a maximum operating pressure.

21
New cards

reciprocating piston

A(n) _______ air compressor compresses air by extending and retracting a piston inside a cylinder.

22
New cards

rotary

_______ cylinders can create rotational movements in specific degrees and are used in applications where a twisting, turning, or back-and-forth motion is desired.

23
New cards

pneumatic cylinder

A(n) _______ is an actuator that moves in a straight line using compressed air.

24
New cards

unloading

_______ is a process that allows a compressor that connects the different stages of an air compressor.

25
New cards

air motor

A(n) _______ is a pneumatic device that uses pressurized air to create rotating mechanical energy.

26
New cards

intercooler

A(n) _______ is a pipe in a multistage air compressor that connects the different stages of an air compressor.

27
New cards

prime mover

A(n) _______ supplies rotating mechanical energy in a fluid power system.

28
New cards

rotary vane

A(n) _______ air compressor uses vanes that slide in and out of a rotating rotor.

29
New cards

pneumatic

A(n) _______ system uses gas under pressure to accomplish work.

30
New cards

duty cycle

_______ is the percentage of time that a machine operates compared to not operating.

31
New cards

multi stage

A(n) _______ air compressor allows flow to be sent from the first stage to the second stage for more energy efficiency.

32
New cards

rotary screws

A(n) _______ air compressor uses intermeshing screw shafts or rotors to create flow.

33
New cards

possitive displacement

A(n) _______ air compressor discharges a fixed quantity of compressed air with each cycle.

34
New cards

nonpossitive displacement

A(n) _______ air compressor is a type of dynamic air compressor that moves a large volume of air using hight speeds.