Chemical Kinetics

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/46

encourage image

There's no tags or description

Looks like no tags are added yet.

47 Terms

1
New cards

chemical kinetics

-rate of reaction defined by the change of the concentrations of the products and reactants with time

-collision theory

-activated complex theory

2
New cards

power

-measure of energy per time

-heat power controlled by diffusion and convection of oxygen to fuel

3
New cards

velocity or flux

-is proportional to a change in force with distance

-flux is the number of objects that pass through an area per unit of time (Joules)

4
New cards

diffusion (Fick’s law)

-molecules travel randomly

-change in concentration with change in distance = concentration gradient

-increase temp = increase energy = increase flux (things move and diffuse faster)

5
New cards

advection (Poiseullielle’s Law)

-pressure gradient

-laminar flow through a cylinder to measure liquid flowing through pipes

6
New cards

heat transfer (Fourier’s Law)

-k thermal energy conductivity of the material

W/(m*K)

7
New cards

Conductivity (Ohm’s Law)

-electric gradient

-mechanical energy from pressure and thermal energy from heat

8
New cards

ignition

-ignition is required to initiate the exothermic reaction by overcoming the activation energy

-the ignition temp is the minimum temp to initiate the reaction (flame, spark, chemical rxn)

9
New cards

activation energy

-the maximum energy separating the energy of the reactants and the product

10
New cards

for a reaction to proceed

-reactant molecules have to approach one another

-they must have favorable alignment

-they must have sufficient energy

-combining intermediates is less stable because the electron numbers are off

11
New cards

the Arrhenius equation

-relates the activation energy to the reaction rate constant

12
New cards

2 models for explaining activation energy

-collision theory models molecules as billiard balls

-activated complex theory: a transition state molecule is modeled by a quasi-equilibrium

-k = AeEa/RT

-larger Ae = smaller k value

13
New cards

collision theory (billiard ball model)

-developed first for gases in 1916

-models the pre-exponential factor A

-the orientation factor p is measured empirically (when molecules collide, they must be pointed in the right direction to form a bond; to make contact must be within 2r)

-the molecules are modeled as spheres so bmax is the sum of the radii of the two reactant molecules

-the square root is the relative average velocity

-the reduced mass is given by mu = m1m2 / (m1 + m2)

-accounts for grazing collisions

-steric factors have to be accounted for empirically

14
New cards

activated complex theory

-developed in 1935 models an intermediate along a reaction coordinate

-better for complex molecules and the reactant-product bond is modeled by a vibration

-the partition function gives the number of molecules at each energy for each degree of freedom

-bonds extend until they break and form a product

15
New cards

determining activation energy

-if we plot ln (k/T) with respect to (1/T) we have a straight line, known as an Eyring plot

-the intercept allows us the calculate the entropy of the activated complex, which is related to the ratio of the partition functions

-increasing temp increases the reaction rate so a chain reaction could occur with the release of energy accelerating the rate

-the enthalpy of the activated complex is always positive because the complex is always less stable and higher energy than the reactants

16
New cards

applications

-primary explosives, igniters, and detonators are unstable compounds

-unstable compounds have lower activation energies

17
New cards

traits

-reactant and oxidant in the same molecule hence simple bond cleavage required

-elements of the product gasses are already bonded

  • lead azide

  • triacetone triperoxide

  • nitroglycerin

-multiple candidates bonds due to symmetry in the molecule

-decomposition involves stretching and breaking an initial bond

-more symmetry = more likely to react

18
New cards

speed of sound

-the distance travelled during a unit of time by a sound wave

-good models are balls and springs, the balls compress and expand in the direction of the sound wave, longitudinal wave

-the speed of the wave c is equal to the square root of the coefficient of stiffness k divided by the density y

-y is the adiabatic index and is the ratio of the specific heats at constant pressure Cp to constand volume Cv

19
New cards

specific heat capacity

-the amount of energy required to raise one gram of material one degree

20
New cards

ramifications

-sound travels faster in non-compressible materials

  • in water it travels 4.2x faster than air

  • in iron it travels 12x faster than air

-sound travels slower in denser materials

-sound travels faster in hotter materials (b/c molecules move faster)

-sound propagates quickly through solid structures

-differential shock wave velocities result in shear forces or brisance (damage done by mechanical energy)

21
New cards

detonation/shock wave

-when the pressure wave exceeds the velocity of sound

-results from the high temperatures and non-compressible state of the explosive prior to detonation

-mechanical energy comes from pressure and volume change, lots of gas products = lots of brisance

-if the rxn doesn’t produce gas products, no sound/pressure wave, only produces heat and light (flash bomb)

22
New cards

three generic steps of combustion (combustion is based on radicals)

1.) initiation: formation of the first free radicals

2.) propagation: reactions among radicals produce more radicals

3.) termination: results from the combination of two free radicals to form neutral species

-radicals can react with neutral molecules to create new radicals = chain rxn

-each step has an associated rate constant, one will be the slowest rate determining step, which will limit the speed of the reaction

-combustion always involves vapors

23
New cards

liquid fuels

-temp must be high enough to vaporize the fuel

-the vapor will then burn when it mixes with O2 and combusts giving a flame

24
New cards

flashpoint

-the minimum temp at which a liquid fuel will produce enough vapor to burn

-once this is achieved, the fuel can then be ignited by an outside source of energy to start a fire

-ignition temp is always higher than flash point

25
New cards

ignition temperature

-temp the fuel combusts at

26
New cards

solid fuels

-will burn only when exposed to heat that is hot enough to decompose the solid into gaseous products

-PYROLYSIS: the decomposition of organic matter by heat

-causes a chain rxn, heat source initiates pyrolysis of solid fuel, gaseous products combust with O2 producing heat and light, this heat pyrolyzes more solid fuel into volatile gas

27
New cards

adiabatic flame

-all the heat Q evolved in the process goes into heating the products and raising their temperature

28
New cards

excess oxidant (lean)

-decreases the temperature because Q must be distributed to excess reactant as well as to the product

29
New cards

buoyant flame

-heated air is less dense than cooler air

-so much of the radiant heat produced in a simple combustion like a burning candle is carried away in rising air and gases

30
New cards

heat is required for phase transitions

-ex.) in a candle, wax must be melted to liquid and vaporized before combustion occurs

-temp versus Q added

31
New cards

heat is directly related to mass transfer

-the greater the Q the more KE is transferred to product molecules, which can be transferred to other molecules through collisions or fast-moving molecules

-the movement of mass is called mass transfer

32
New cards

heat

-the measure of energy in the form of kinetic motion of molecules

-heat causes all of the destructiveness of the fire

-heat transfer and flow in combustion begins with the premise that all heat evolved in the process goes into heating the products and raising their temp - adiabatic flame

33
New cards

temperature

-a means of comparing the amount of heat contained in two different objects

34
New cards

4 considerations of heat as applied to fire investigation

1.) heat as it is means of ignition

2.) increases the rate of a chemical reaction as it develops, rate of a combustion reaction doubles with every 10*C increase in temp; once a fire has started, it generates heat and raises the temp of the reacting components and therefore the reaction rate

3.) the transfer of heat spreads the fire when the conditions of fuel and O2 are met

4.) effects materials that survive the fire that bear indicators of the fire’s spread direction, intensity, and duration

35
New cards

heat release rate

-the amount of heat produced by a fire/heat source is measured in joules or Btu

-the rate at which the heat is produced by the heat source is measured in J/s or Btu/s; because a J/s is the definition of a Watt, the rate is generally reported in units of Watts

-the heat release rate is represented by J or Q/t

-J is the quantity used to characterize the size of a fire; it is used to compare fires, predict their behavior, and their influence on nearby fuels

36
New cards

heat is transferred to the fuel and to regions away from the combustion in through 3 mechanisms

1.) conduction

2.) convection

3.) radiation

37
New cards

conduction

-the transfer of heat energy through a material by contact between its moving molecules

-mostly limited to localized action since contact is necessary

-mostly in solid materials where molecular contact is at its highest

-heat travels from hot to cold

-the rate at which heat is transmitted through a material by conduction is measured as the thermal conductivity k with units of W/m-k

-thermal conductivity is inversely related to heat capacity

38
New cards

heat is conducted faster if

-T2 is much greater than T1

-the area is larger

-the distance through which the conduction is taking place is smaller than the area

39
New cards

convection (advection)

-the distribution of heat by means of a circulating medium, found in gases and liquids not in solids

-driven by the difference in density caused by a temp variation (buoyant flows)

-convection refers to both diffusion and advection mass transport mechanisms

-convection is routinely used mistakenly by forensic sciences for advection which refers to bulk fluid flow

-responsible for the movement and spread pattern of fire

-largely determines the fundamental properties of fire

40
New cards

radiation

-heat transfer through electromagnetic waves (light)

-responsible for some fire growth and the spread of flames, especially in larger fires

-all objects with a temperature above absolute zero radiate energy in the form of radiation

-can be transferred without contact (conduction) or via a circulating medium (convection)

-radiative heat must decrease as 2pir2 because of conservation of energy and divergence (Gauss’s law)

41
New cards

surfaces facing a fire

-will become heated by radiant heat and if this temp reaches the surfaces ignition temp the new material will ignite

42
New cards

in a simple fire

-the temperature peaks in the well-mixed zone just above the fuel package (what catches on fire)

-as gases rise they lose their heat, some by mixing and convective transfer with surrounding air, and some by radiant loss

-as a result, if we measure flame temp, we would see a predictable pattern as a function of height above the fuel package

-temp decreases from 700-900C just above fuel, to about 500C at the tip of the flame where it becomes very turbulent and intermittent

-as gases rise they lose heat until they lose enough to no longer be buoyant

43
New cards

the height of the flame

-is dependent on the rate at which air enters the area of the flames (more contained = higher flame)

-less perimeter (like a fire in the corner of a room compared to the middle), lets the flames grow even taller as hot gases rise

44
New cards

the Heskestad Equation

-Zf is the visible flame height in meters

-Q is the heat release rate in kW

-k is the wall factor (1 for no wall, 2 for a single wall, 4 for a corner)

-relationships let us predict the size of the fire will appear to an observer given the fire’s heat release rate

Zf = 0.17(kQ)2/5

45
New cards

mass transfer

-the movement of atmospheric O2 and N2 into the combustion zone

-this diffusion is driven by a concentration gradient, and aided by the rising heated gases

-as the heated products rise, surrounding air moves in to fill the void

-molecules reach the reaction zone and collide with molecules heated by the combustion increasing the velocity of the heated molecules

46
New cards

important in determining how well a fuel and oxidant mix

-the movement of O2 into the combustion zone is driven by a concentration gradient

-poured liquid accelerant transports in a lateral direction controlled by the surface characteristics

47
New cards

concluding thoughts

-all kinetic effects are related to molecular motion

-the rate of a reaction is determined by the relative stability of the activated complex, the temperature, and the collision frequency with the correct orientation of reaction molecules

-pressure wave can become supersonic detonation waves by the chain reaction of heat release, increased temp, and reaction rate

-thermal conductivity, advection, and radiation is important to flame and burn patterns

-mass transport is important for flames and deflagrations that are diffusion limited

-primary explosives and unstable compounds typically have lower activation energies