1/44
Vocabulary practice flashcards covering essential electronic components, workshop tools, testing equipment, and diagnostic symbols from the ELT Intro assignment guide.
Battery
An electrical power source that stores chemical energy and converts it into electrical energy on demand to power electrical devices.
Battery Snap / Battery Connector
A connector designed to quickly attach a 9Â V battery to a circuit without requiring wires to be held or connected directly to the battery terminals.
Power Rail
A track or bus that distributes a steady electrical voltage from a power source to various active and passive components within a circuit, diverting power to multiple locations.
Resistor
A passive component that limits the flow of current in an electrical circuit, preventing overloading and combusting, and controlling how intensely parts of a circuit operate (such as dimming an LED).
Preset Resistor
A miniature variable resistor designed for infrequent resistance adjustments in a circuit, typically adjusted once after manufacturing and used to vary resistance when necessary.
Potentiometer
A three-terminal variable resistor used to manually adjust the flow of current within an electrical circuit.
Diode
A semiconductor component that allows electrical current to flow properly in one direction while restricting it from flowing in the opposite direction.
Light-Emitting Diode (LED)
A specialized diode that emits light when an electrical current passes through it, commonly used in circuits as a visual indicator to show when something is turned on or off.
Light Dependent Resistor (LDR)
A light-sensitive sensor whose resistance changes to detect variations in ambient light intensity, converting optical information into an electrical signal.
Electrolytic Capacitor
A polarized capacitor designed to smooth voltage, reduce electrical fluctuations, and temporarily store charge in an electric circuit.
Non-Electrolytic Capacitor
A non-polarized capacitor used to filter electrical signals, reduce electrical noise, and help regulate voltage and current in circuits.
NPN Transistor
A specific configuration of bipolar junction transistor whose primary purpose is to amplify or switch electrical signals, turning different parts of a circuit on and off.
Transistor
A versatile semiconductor device capable of switching circuits on and off, amplifying weak electrical signals, regulating current flow, and processing electrical signals.
Integrated Circuit (IC)
A microchip designed to process and modify signals while controlling the operation of electrical systems, such as regulating the spin speed of washing machines or operating computers.
Slide Switch
A mechanical switch operated by sliding a knob to turn a circuit on or off, frequently offering more than two switch positions to choose between different operational modes.
Push Switch / Push Button
A switch mechanism that toggles devices on and off or sends momentary electrical pulses across a circuit when pressed.
Rocker Switch
An electrical switch that rocks back and forth when pressed on either side, providing a convenient way to turn devices on and off.
Toggle Switch
A switch actuated by a mechanical lever to turn devices on and off as well as redirect electrical current between alternate circuit paths.
Micro Switch
A sensitive snap-action switch that detects physical movement or contact to rapidly open and close a circuit, often used to turn components like LEDs or buzzers on and off.
Motor
An electromechanical component that transforms electrical energy into mechanical energy and physical force to drive appliances like blenders, microwaves, and shredders.
Microphone
An input acoustic transducer that converts sound waves into electrical signals for use within a circuit.
Buzzer
An audio output signaling device whose purpose is to convert electrical energy directly into sound.
Connector
An electro-mechanical device used to couple two or more electrical components or wires together to transfer electrical signals.
Long-Nose Pliers
A hand tool featuring elongated jaws designed to grip, hold, and bend wires and small components in confined or hard-to-reach areas.
Wire Strippers
A hand-held cutting tool designed to strip the outer insulating jacket off wires cleanly without damaging the interior conductive metal strands.
Wire Cutters
A sharp-edged hand tool specifically designed to snip electrical wires cleanly and efficiently.
Soldering Iron
A heated electrical tool used to melt solder wire to form permanent, electrically conductive joints between wires and electronic components.
PCB (Printed Circuit Board)
A rigid insulated board that mechanically supports and electrically links components via conductive copper pathways called traces.
Breadboard
A solderless prototyping board featuring arrays of interconnected spring clips, allowing quick assembly and testing of temporary electronic circuits.
Digital Multimeter (DMM)
A diagnostic testing instrument used to quantitatively measure electrical properties in a circuit, including voltage, current, and resistance.
DC Power Supply
A benchtop device that delivers a stable, regulated direct current (DC) voltage and current to electronic devices for testing and operation.
Oscilloscope
An electronic instrument that displays electrical signals as waveforms on a screen, enabling the analysis of voltage over time and circuit troubleshooting.
Function Generator / Signal Generator
A piece of electronic lab equipment that generates electrical waveforms at various frequencies and shapes to test and stimulate circuits.
Needle-Nose Pliers
Pliers with slender, tapered jaws used to grasp, bend, and manipulate small wires in tight spaces inaccessible to bare hands.
Tweezers
A fine-tipped grasping tool used to hold and position delicate, intricate electronic components that are too small to manipulate with fingers.
Jumper Wires
Flexible insulated wires terminating in pin or socket connectors, used to bridge electrical connections on a breadboard or prototyping board without soldering.
Alligator Clips
Spring-loaded metal clips with serrated jaws used to form temporary electrical connections by clamping onto conductive component leads or test equipment.
Electric Motor (Internal Components)
The key internal structural and functional assemblies of an electric motor, including the stator, stator winding, rotor, rotor winding, shaft, bearings, end bells, motor frame, terminal box, cooling fan, and fan cover.

Micro Switch (Internal Contact Configuration)
The internal mechanism of a micro switch, comprising an actuator lever, a snap spring, and three distinct terminals: Common (C), Normally Open (NO), and Normally Closed (NC).

Dynamic Microphone (Energy Conversion Diagram)
The transduction process where incoming acoustic sound waves (mechanical wave energy) move a coil within a magnetic field to yield microphone audio signals (electrical energy).

Switch Contact Architectures (SPST, SPDT, DPST, DPDT)
The standard pole and throw configurations for mechanical switches: Single Pole Single Throw (SPST), Single Pole Double Throw (SPDT), Double Pole Single Throw (DPST), and Double Pole Double Throw (DPDT).

Capacitor Schematic Symbols
Standard circuit diagram representations used to differentiate between polarized capacitors, nonpolarized capacitors, variable polarized capacitors, and variable nonpolarized capacitors.

Electrolytic Capacitor (Internal Construction)
The multilayered interior structure of an electrolytic capacitor, featuring conductive metal electrode plates separated by an insulating oxide film layer and a liquid or gel electrolyte.

Integrated Circuit (Circuit Representation)
The schematic convention for integrated circuits, shown either as functional symbol blocks (such as operational amplifier triangles) or as dual in-line package (DIP) pinouts with designated functional pins.

NPN Transistor (Terminals and Schematic Symbol)
The three terminal designations—Collector (C), Base (B), and Emitter (E)—and the schematic symbol where the emitter terminal features an outward-pointing arrow.
