1/53
Looks like no tags are added yet.
Definition of A Transmissom Line
a device that guides electrical energy from one point to another
Purpose of a Transmission Line
to connect a signal source to a load
Source
generator or sending end
Load
output or receiving end
Impedance
comparable to resistance
Parallel Wire
also called two-wire or ribbon line. spaced from 1/4 of an inch to several feet apart
Twisted Pair
two insulated wires twisted together. Flexible. Not used for higher frequencies.
Shielded Pair
parallel conductors surrounded by a solid dielectric
Rigid Coax
CENTRAL INNER CONDUCTOR is surrounded by solid dielectric. The dielectric is mounted inside a rigid non-flexible outer conductor.
Flexible Coax
shielding has a rubber composition coating
Wave Guide
Rigid, hollow metal or dielectric tube. Allow the transmission of high frequencies with least amount of loss.
Transmission Line Impedance
effect of impedance on RF energy transmission is comparable to resistance
Characteristic Impedance
ratio of E to I, ratio will. ratio will be equal at every point along the line
Effect of Characteristic Impedance
maximum power and minimal losses
Incident
source to load
Reflected
load to source
Standing Wave
results from the algebraic addition of the incident wave to the reflected wave
Resonant
standing waves are present; not terminated in its Zo, also called a TUNED line
Non-resonant
no standing waves present; is terminated in Zo, also called an UNTUNED line, theoretically a perfect line
Effect of Standing Waves on energy transmission
maximum power will NOT be transmitted
Standing Wave Ratio
Ideal ratio is 1:1
Forms of SWR
VSWR, PSWR, ISWR
Power Loss
energy dissipated as heat
Induction loss
Current induced in nearby metal object, power dissipated
Radiation Loss
Magnetic lines of force projected into space resulting in power loss
Transmission Line Terminated in Zo
no reflections, no standing waves, and 100% power
Transmission Line Not Terminated in Zo
has reflections, standing waves, maximum power will NOT be transmitted
Termination
impedance matching, RF loading
Attenuator
Reduces power level of transmitted signal at a specified frequency
Mismatch/Offset Termination
Insert a known amount of SWR into a transmission line
Directional Coupler
sample incident and reflected microwave, minimal disturbance
Isolator
allows max forward conduction while eliminating reverse conduction
RF Filter
allows certain frequencies to pass while rejecting other frequencies
Impedance Matching
feed through termination
RF load
power is dissipated as heat, dummy load
Mismatch/Offset Termination
adds a known amount of SWR into transmission line; calibrated with a known amount of SWR
Attentuators
reduce the power of the transmitted signal
Attenuation Of RF Signals
reduction of the signal amplitude to a measurable level
Termination
constructed of resistive material at a predetermined resistance sealed
Fixed Attenuator
Constructed of fixed graphitized sand
Variable Attenuator
a resistive rod or vane is placed at the center of an electric field
Isolator
a non-reciprocal device employing ferries biased
Attenuators and Terminations
clearly marked to show the level of attenuation or resistance; specified frequency range
Correction Graph
provided to show actual attenuation factor at specified frequencies
Pin Depth
measured with a dial indicator
Signal Source
Standard signal generator
Slotted Line
consists of a probe that samples the electric field
SWR Meter
High gain tuned audio amp
Impedance Bridge
consists of three connectors; RF input, reflected RF output, and Device under Test (D.U.T.)
Scalar Analyzer
an automated system
Using a Slotted Line and SWR meter
signal source injects modulated signal
Cleanliness
contaminated connectors will cause unwanted VSWR
Attenuator Cables
use as few cables as possible, use short cable, higher frequencies require shielded cable
Attenuator Adjustments
none are possible