1/119
Looks like no tags are added yet.
The primary purpose of fixation is to:
stop enzymatic action
remove the water from the tissue
provide support for the tissue
autolyze the tissue
stop enzymatic action
Which of the following fixatives contains picric acid, formalin, and acetic acid?
Zenker
Helly
Bouin
Zamboni
Bouin
The volume of fixative should exceed the volume of the tissue by:
15x to 20x
Tissue must be washed with 80% alcohol after fixation in:
Genre solution
Davidson solution
glyoxal
formalin
Genre solution
(this is to remove excess picric acid)
Which of the following fixatives contains formalin, potassium dichromate, and mercuric chloride?
Zenker
Helly
Carnoy
Orth
Helly
Precipitate left in tissues that have been fixed in solutions containing mercuric chloride may be removed by immersion in:
running water
sodium thiosulfate
weak ammonia water
iodine
iodine
(Gram or Lugol)
Commercial stock formaldehyde solutions contain how much formaldehyde?
37%-40% formaldehyde
Formalin pigment would almost certainly be formed when the pH of the formalin is:
below 6
(make sure formaldehyde doesn’t become too acidic, should remain above 6 pH)
Formalin pigment may be removed from tissue by:
running water
alcoholic iodine
alcoholic picric acid
potassium permanganate
alcoholic picric acid
10% formalin is the same as:
37%-40% formaldehyde
10% formaldehyde
4% formaldehyde
1% formaldehyde
4% formaldehyde
37%-40% formaldehyde is the stock solution of formaldehyde before being mixed with water and diluted 1:10 for formalin. The resulting dilution is the 10% formalin solution. So:
10% formalin = 4% formaldehyde
For best results when using formalin as a routine fixative, it must be made:
acidic
basic
neutral
isoelectric
neutral
Absolute alcohol is indicated as a primary fixative if the tissue is to be processed for the demonstration of:
fat
immunofluorescence
enzymes
urate crystals
urate crystals
(urate crystals are soluble with aqueous solutions)
Putrefaction of tissue is caused by:
enzymatic activity
bacterial action
aqueous fixatives
overfixation
bacterial action
To prepare a 10% solution of formalin, which of the following amounts of water should be added to 100mL of stock formaldehyde?
1000mL
900mL
450mL
10mL
900mL
10% formalin is a 1:10 of stock formaldehyde, which is considered 100% formalin; therefore, 100mL of stock + 900mL of water = 1,000mL of a 1:10 dilution.
The ratio of stock solution to acid in Zenker fixative is:
95 parts stock to 5 parts hydrochloric acid
95 parts stock to 5 parts acetic acid
95 parts stock to 5 parts formaldehyde
99 parts stock to 1 part acetic acid
95 parts stock to 5 parts acetic acid
Which of the following tissue changes will occur if acetic acid is used alone as a fixative?
swelling
shrinkage
overhardening
poor nucleoprotein preservation
swelling
A good fixative for central nervous system tissue to be stained with silver or gold techniques is:
Zenker solution
neutral-buffered formalin
Bouin solution
formalin ammonium bromide
formalin ammonium bromide
After fixing tissue in Bouin solution, the excess picric acid is frequently removed by washing in:
running water
absolute alcohol
50%-70% alcohol
phosphate buffer
50%-70% alcohol
Carnoy fluid is prepared with acetic acid, alcohol, and:
chloroform
formalin
acetone
osmium tetroxide
chloroform
The first and most important procedure in the preparation of a tissue for microscopic examination is the choice of:
fixative
dehydrating agent
clearing agent
staining technique
fixative
Fats are usually preserved best if the tissue is fixed in:
osmium tetroxide
Carnoy
Bouin
Helly
osmium tetroxide
When alcohol is used as the primary fixative, one should expect:
fat preservation
excessive tissue shrinkage
very soft tissue
slow penetration
excessive tissue shrinkage
Generally, an increase in the temperature of the fixative solution:
decreases the tissue autolysis
decreases the fixative penetration
increases the speed of fixation
increases the volume of fixative needed
increases the speed of fixation
Depending on the reagent used, which of the following may cause tissue to become overhardened?
prolonged fixation
abbreviated fixation
inadequate dehydration
incomplete clearing
prolonged fixation
Fixatives containing chromate salts usually require:
additional fixation
washing in water
washing in alcohol
no special treatment
washing in water
(chromate salts are soluble in aqueous solutions, where water is the solvent)
Substitution of alcohol as the diluting solution for formaldehyde results in:
slower fixation
less hardening of tissue
better retention of fats
better preservation of glycogen
better preservation of glycogen
Zinc salts are added to some formalin fixatives to:
prevent the loss of cytoplasmic structures
provide superior nuclear detail
decrease tissue shrinkage
keep tissue from overhardening
provide superior nuclear detail
Tissue fixed in glutaraldehyde is not satisfactory for:
the periodic acid-Schiff (PAS) reaction
electron microscopy
argentaffin stains
routine hematoxylin & eosin (H&E) stains
the periodic acid-Schiff (PAS) reaction
For immunofluorescence, the tissue should be:
fixed in formalin
fixed in alcohol
fixed in B-5
unfixed
unfixed
Which of the following is a nonaqueous fixative?
Carnoy
Zenker
Bouin
Zamboni
Carnoy
Which of the following fixatives will leave the tissue protein uncoagulated?
Zenker
osmium tetroxide
B-5
zinc formalin
osmium tetroxide
To prevent polymerization of formaldehyde, which of the following is added to the commercial stock solutions?
methyl alcohol
formic acid
paraformaldehyde
sodium phosphate
methyl alcohol
Polymerized formaldehyde is known as:
glutaraldehyde
paraformaldehyde
paraldehyde
acetaldehyde
paraformaldehyde
Formaldehyde reacts with protein side chains by combining with the:
carboxyl group
thiol group
amino group
phenolic group
amino group
Hollande solution is a modification of which of the following?
Carnoy
Zamboni
Bouin
Orth
Bouin
Which of the following is a nonadditive fixative?
mercuric chloride
osmium tetroxide
formaldehyde
ethyl alcohol
ethyl alcohol
Which of the following is an excellent fixative for eyes?
glyoxal
formalin
Davidson solution
Zamboni solution
Davidson solution
(with this solution, the retina does not detach like with other solutions)
The recommended minimum time for fixation in formalin is how long?
6-8 hours
Methylene bridges are formed during the reaction of certain tissue groups with:
osmium tetroxide
formaldehyde
picric acid
chromium trioxide
formaldehyde
A disadvantage of osmium tetroxide fixation is that osmium:
fixes fat poorly
penetrates poorly
coagulates tissue proteins
impedes staining with basic dyes
penetrates poorly
The permissible exposure limit (PEL) for formaldehyde is currently what?
0.75 ppm
(parts per million)
An unbuffered 10% solution of formaldehyde is?
isotonic
hypotonic
hypertonic
osmotically active
unbuffered 10% solution of formaldehyde is hypertonic
buffered 10% solution of formaldehyde is hypotonic
Which of the following must be used under a hood because it readily vaporizes and will fix the nasal mucosa?
chromic acid
formaldehyde
zinc sulfate
osmium tetroxide
osmium tetroxide
Good fixation is indicated on an electron micrograph of a section of plasma cell if the:
nuclear envelope shows regularly spaced dilated areas
mitochondria show no swelling or disruption
channels of endoplasmic reticulum vary in width
plasmalemma shows periodic infolding and breaks
mitochondria show no swelling or disruption
Mitochondria are very sensitive indicators of the quality of fixation; they will show no swelling or disruption if the fixation is good.
One advantage of primary osmium fixation is that:
specimens may remain in fixative indefinitely
histochemistry can be performed on the fixed tissue
lipids are rendered insoluble
penetration of tissue is excellent
lipids are rendered insoluble
One advantage of primary aldehyde fixation is that:
better penetration is obtained than with osmium
lipids are rendered insoluble
membrane-bound cavities tend to shrink
membranes become electron dense
better penetration is obtained than with osmium
(osmium has poor penetration)
One advantage of primary buffered picric acid-formaldehyde fixation (PAF, Zamboni) is that:
lipids are rendered insoluble
lysosomes may be extracted during processing
the solution does not contain hazardous chemicals
specimens may remain in the fixative indefinitely
specimens may remain in the fixative indefinitely
When used as a primary fixative for electron microscopy, Millonig formaldehyde:
makes histochemistry impossible
renders lipids insoluble
allows both light and electron microscopy
requires that specimens be removed after 2-4 hours
allows both light and electron microscopy
When used as a primary fixative for electron microscopy, glutaraldehyde:
makes histochemistry impossible
renders lipids insoluble
makes membranes electron dense
requires that specimens be removed after 2-4 hours
requires that specimens be removed after 2-4 hours
Electron micrographs of buffered picric acid-formaldehyde (PAF, Zamboni) fixation show marked extraction of the lipids. This indicates that most likely:
the specimen did not remain in the fixative long enough
secondary osmium tetroxide fixation was not used
dehydration of the tissue was inadequate
the embedding medium was old
secondary osmium tetroxide fixation was not used
Secondary fixation with osmium tetroxide is necessary to fix lipids. After primary aldehyde fixation, up to 93% of lipids can be extracted; with osmium postfixation, only 7% can be extracted. Lipids are also not well-preserved with primary PAF fixation unless secondary osmium tetroxide fixation is used.
Satisfactory electron microscopy can be obtained on a specimen from the wet tissue file, if it has been fixed and stored in:
Millonig formalin or formaldehyde-glutaraldehyde (4CF-1G)
Bouin solution
or buffered picric acid-formaldehyde
osmium tetroxide or 2% glutaraldehyde
neutralized formalin or buffered picric acid-formaldehyde
Millonig formalin or formaldehyde-glutaraldehyde (4CF-1G)
The pure polymer of formaldehyde is known as:
acrolein
glutaraldehyde
paraldehyde
paraformaldehyde
paraformaldehyde
The solution of buffered 4% paraformaldehyde is cloudy. The most likely explanation is that the:
pH is slightly >7.0
paraformaldehyde is not totally depolymerized
solution was not refrigerated after preparation
tonicity of the solution is too low
paraformaldehyde is not totally depolymerized
Depolymerization of paraformaldehyde occurs with:
chilling of the solution
the addition of acid
adjusting the tonicity
heating of the solution
heating of the solution
A specimen will not be considered optimally fixed if the nuclei show:
crisp chromatin patterns
bubbling
well-defined membranes
a lack of perinuclear space
bubbling
Answer the following questions about formalin pigment:
Is it preventable? yes/no
Is it removable? yes/no
If removable, how?
Yes, it is preventable.
Yes, it is removable.
Formalin pigment can be removed with saturated alcoholic picric acid and alkaline alcohol.
Answer the following questions about mercury pigment:
Is it preventable? yes/no
Is it removable? yes/no
If removable, how?
No, it is not preventable.
Yes, it is removable.
Mercury pigment can be removed with iodine, followed by sodium thiosulfate.
Answer the following questions about chromium pigment:
Is it preventable? yes/no
Is it removable? yes/no
If removable, how?
Yes, it is preventable.
It’s questionable whether it is removable.
Chromium pigment can be partially removed by acid alcohol.
Formalin fixation stabilizes lipids. True or False?
False
Acetic acid is an excellent nuclear fixative. True or False?
True
Fat is well-preserved by Carnoy solution. True or False?
False
Formalin penetrates rapidly but fixes slowly. True or False?
True
10% formalin is a 1:4 dilution of commercial formalin. True or False?
False
The actual dilution for 10% formalin is 1:10.
Davidson solution contains formaldehyde, picric acid, and absolute ethanol. True or False?
False
Unbuffered formaldehyde solutions are hypotonic. True or False?
False
Bouin solution contains picric acid, formaldehyde, and hydrochloric acid. True or False?
False
Any fixative containing mercuric salts will leave a pigment in the tissue. True or False?
True
Mercury pigment may be removed from tissue by immersion in sodium thiosulfate. True or False?
False
Formalin ammonium bromide is a very good fixative for connective tissue. True or False?
False
The fixing fluid considered best for the preservation of nuclear detail is buffered formalin. True or False?
False
Formalin pigment can be removed from tissue by immersion in alcoholic picric acid. True or False?
True
The volume of the fixative should exceed the volume of the tissue by 1-2 times. True or False?
False
Tissue left in a fixative beyond the defined time may become excessively hard. True or False?
True
Acetic acid is a useful addition to many compound fixatives because of its shrinking action. True or False?
False
Because formalin is a coagulant fixative, it is considered an excellent fixative for paraffin embedding. True or False?
False
Acetone is sometimes used when a rapid-acting fixative is needed. True or False?
True
A fixative stops autolysis and putrefaction. True or False?
True
If tissues have been fixed in an aqueous fixative, uric acid crystals cannot be demonstrated. True or False?
True
A good fixative should penetrate slowly. True or False?
False
If one wishes to prevent the formation of a pigment, formalin solutions must be buffered to a pH >7.0. True or False?
False
Concentrated commercial solutions of formaldehyde are 37%-40% by weight of the gas formaldehyde dissolved in water. True or False?
True
Osmium tetroxide chemically fixes fat. True or False?
True
Helly, Zenker, and Orth solutions all contain mercury. True or False?
False
Only Helly and Zenker solutions contain mercury, not Orth solution.
Chrome pigment can be prevented by washing the tissues with water after fixation. True or False?
True
B-5 fixative contains formaldehyde and potassium dichromate. True or False?
False
Glutaraldehyde is frequently used to fix specimens for electron microscopy. True or False?
True
Orth solution is the best fixative for pheochromocytomas when immunohistochemistry is not to be performed. True or False?
True
Heat and desiccation are methods of fixation. True or False?
True
Glyoxal fixatives are rapid-acting compared to formaldehyde. True or False?
True
Zinc is a satisfactory replacement for mercury in some fixative solutions. True or False?
True
What fixative/technique is preferred/used for: connective tissue
absolute alcohol
Bouin solution
10% aqueous formalin
frozen section (no fixation)
Orth solution
osmium tetroxide (PTAH)
Zamboni solution
Zenker solution
Bouin solution
What fixative/technique is preferred/used for: electron microscopy
absolute alcohol
Bouin solution
10% aqueous formalin
frozen section (no fixation)
Orth solution
osmium tetroxide (PTAH)
Zamboni solution
Zenker solution
osmium tetroxide (PTAH) and Zamboni solution
What fixative/technique is preferred/used for: enzyme histochemistry on muscle
absolute alcohol
Bouin solution
10% aqueous formalin
frozen section (no fixation)
Orth solution
osmium tetroxide (PTAH)
Zamboni solution
Zenker solution
frozen section (no fixation)
What fixative/technique is used for: immunofluorescence
absolute alcohol
Bouin solution
10% aqueous formalin
frozen section (no fixation)
Orth solution
osmium tetroxide (PTAH)
Zamboni solution
Zenker solution
frozen section (no fixation)
What fixative/technique is used for: pheochromocytomas
absolute alcohol
Bouin solution
10% aqueous formalin
frozen section (no fixation)
Orth solution
osmium tetroxide (PTAH)
Zamboni solution
Zenker solution
Orth solution
Choose the component chemicals for: B-5
95% alcohol
absolute alcohol
acetic acid
chloroform
copper acetate
formaldehyde
mercuric chloride
osmium tetroxide
paraformaldehyde
picric acid
potassium dichromate
sodium chloride
sodium phosphate, dibasic
sodium phosphate, monobasic
formaldehyde + mercuric chloride
Choose the component chemicals for: Bouin
95% alcohol
absolute alcohol
acetic acid
chloroform
copper acetate
formaldehyde
mercuric chloride
osmium tetroxide
paraformaldehyde
picric acid
potassium dichromate
sodium chloride
sodium phosphate, dibasic
sodium phosphate, monobasic
acetic acid + formaldehyde + picric acid
Choose the component chemicals for: Carnoy
95% alcohol
absolute alcohol
acetic acid
chloroform
copper acetate
formaldehyde
mercuric chloride
osmium tetroxide
paraformaldehyde
picric acid
potassium dichromate
sodium chloride
sodium phosphate, dibasic
sodium phosphate, monobasic
absolute alcohol + acetic acid + chloroform
Choose the component chemicals for: 10% neutral buffered formalin
95% alcohol
absolute alcohol
acetic acid
chloroform
copper acetate
formaldehyde
mercuric chloride
osmium tetroxide
paraformaldehyde
picric acid
potassium dichromate
sodium chloride
sodium phosphate, dibasic
sodium phosphate, monobasic
formaldehyde + sodium phosphate, dibasic + sodium phosphate, monobasic
Choose the component chemicals for: Gendre
95% alcohol
absolute alcohol
acetic acid
chloroform
copper acetate
formaldehyde
mercuric chloride
osmium tetroxide
paraformaldehyde
picric acid
potassium dichromate
sodium chloride
sodium phosphate, dibasic
sodium phosphate, monobasic
95% alcohol + acetic acid + formaldehyde + picric acid