1/449
Looks like no tags are added yet.
Biohazard can (blue bag)
All items that have come into contact with bacteria are disposed in
Sharps container
Dispose of slides, swabs, and pipettes in the
Discard cart
Glassware (flasks, beakers, bottles, test tubes) are placed on the
Regular Garbage Cans
Gum, paper products not contaminated with microorganisms, and items brought in to the laboratory are disposed of in the
BSL 1
Microorganisms not known to cause disease in healthy adults.
Examples: Bacillus subtilis, Serratia marcescens, Staphylococcus saprophyticus
BSL 1 Examples
Bacillus subtilis, Serratia marcescens, Staphylococcus saprophyticus
BSL 1 controls
• Standard microbiological practices are followed.
• Personal protective equipment (PPE) is not required.
• A sink must be available for hand washing.
BSL 2
Indigenous microorganisms that can lead to diseases of varying severity in healthy adults.
BSL 2 Examples
Staphylococcus aureus, Streptococcus pyogenes, Salmonella
BSL 2 controls
• Standard microbiological practices are followed.
• A sink for handwashing and an eyewash must be available.
• Laboratory access is restricted.
• PPE must be worn including lab coats and gloves. Eye protection and face shields are worn when needed.
• Work that may generate aerosols or splashes are performed in a biological safety cabinet/hood.
• Contaminated waste is autoclaved.
• The laboratory has self-closing doors.
BSL 3
Indigenous or exotic microorganisms that cause serious or potentially lethal disease through respiratory transmission.
BSL 3 Examples
Mycobacterium tuberculosis, Bacillus anthracis, Francisella tularensis
BSL 3 Controls
• Standard microbiological practices are followed.
• A hands-free sink and eyewash must be available.
• Locking, double door access separates the lab's work area from other parts of the facility.
• PPE must be worn including lab coats, gloves, eye protection, and respirators.
• All work with microorganisms must be performed in a biosafety cabinet/hood.
• Decontamination of all waste and lab clothing before laundering.
• Laboratory must have negative air-flow (air can not escape to surrounding rooms) and exhaust air cannot be recirculated (must be vented to outside of building after decontamination by ultra-filtration).
• Medical surveillance of laboratory employees. Immunizations may be required
BSL 4
Microorganisms that are dangerous and exotic with high risk of aerosol transmitted infections. Rarely are there treatments or vaccines for these microorganisms, and the diseases they cause are frequently fatal.
BSL 4 Examples
Ebola virus, Marburg virus
BSL 4 Controls
• Standard microbiological practices are followed.
• Change clothing before entering lab.
• A hands-free sink and eyewash must be available.
• The laboratory must be in a separate building or in an isolated and restricted zone of the building.
• All work with microorganisms must be performed in a Class III biosafety cabinet or by wearing a full body, positive pressure suit.
• Decontaminate all materials before exiting lab (including clothes).
• Shower upon exiting lab.
• Change clothes before exiting lab.
• Laboratory must have negative air-flow (air can not escape to surrounding rooms) and exhaust air cannot be recirculated (must be vented to outside of building after decontamination by ultra-filtration).
• Medical surveillance of laboratory employees. Immunizations may be required.
Microorganism/microbe
living organisms that cannot be seen without a microscope
Ubiquity of Microorganisms
the concept that microorganisms are everywhere
- microbes are virtually ubiquitous
Sterile
free of microbial contamination
Contamination
Undesired introduction of impurities like microbes, into or onto an item (i.e. countertop, food, water, skin, etc.
Agar
a seaweed extract used in Asian dishes that melts at ~85°C, solidifies at room temperature (~25°C), and can be incubated up to 60°C/140°F without melting.
Robert Koch designed a glass dish which could hold gelatin and agar for microbial growth in 1881.
petri dish
pure culture
one type of microbe
aseptic technique
a set of precautions microbiologists take when working in the lab to avoid contamination.
When you fail to use aseptic technique, you risk doing the following three things:
1. Contaminate others with microorganisms that could lead to infection.
2. Contaminate yourself with microorganisms that could lead to infection.
3. Contaminate media and/or the microorganisms being studied in the lab.
Disinfectants
can destroy vegetative cells and viruses but may not destroy endospores.
Due to this limited ability, disinfectants can not be used to sterilize surfaces or equipment.
Loops and needles are used to
transfer cultures
flaming your loop/needle
The entire wire portion of the loop or needle must be heated this way
It is absolutely necessary to allow the loop or needle to cool before transferring an inoculum of bacteria.
Fifteen to twenty seconds is usually enough time for the loop or needle to cool to a point that you will not kill the bacteria that you are transferring.
Selective medium
medium that allows only certain microorganisms to grow and inhibits the growth of other microorganisms
Example of selective medium
Dyes eosin and methylene blue when incorporated into EMB (Eosin Methylene Blue) media do not affect the growth of Gram negative bacteria but do inhibit the growth of Gram positive bacteria
EMB
Eosin Methylene Blue
Differential medium
Medium that contains substances that cause some bacteria to take on an appearance that distinguishes them from other bacteria
EMB is both a
selective AND differential medium
Vigorously ferment lactose Gram-negative bacteria on EMB agar
colonies with metallic-green sheen
Moderate lactose fermenters Gram-negative bacteria on EMB agar
purple colonies
Do not ferment lactose Gram-negative bacteria on EMB agar
pink or colorless colonies
Why do students often confuse colorless colonies with purple colonies on certain media?
Because the media is purple
— colorless colonies are clear, but purple ones are solid and you can't see through them
If an organism can breakdown carbohydrates by oxidation or fermentation
acid is usually produced
Phenol red carbohydrate test - purpose
Detects whether an organism produces acid from carbohydrate metabolism by using phenol red as a pH indicator
Phenol red color change
Red = alkaline pH
Yellow = acidic pH
Acid production
Yellow color indicates the organism produced acid, usually through fermentation
Determines if an organism produces acid:
Fermentation → acid produced with or without oxygen
Oxidation → acid produced only in the presence of oxygen
Fermentation
acid produced with or without oxygen
Oxidation
acid produced only in the presence of oxygen
Lab observation tip
Check the color change carefully to determine whether acid production is from fermentation or oxidation
O/F carbohydrate tubes
Determines whether an organism metabolizes a carbohydrate by fermentation (anaerobic) or oxidation (aerobic)
O/F medium contains
semisolid agar → allows anaerobic conditions for fermentation
- Phenol red tubes have liquid instead
Difference between O/F medium and Phenol red tubes?
O/F= semisolid agar
Phenol red= liquid
F (Fermination) tube setup
1. Stab with inoculating needle
2. Add sterile mineral oil
Adding sterile mineral oil creates...
anaerobic environment for fermentation
O (Oxidative) tube setup
No oil added → aerobic environment for oxidation
Acid production indicator
green → yellow
Organisms that turn both the O and F tubes yellow carry out
fermentation of carbohydrates
Organisms that turn only the O tube yellow
cannot carry out fermentation and produce acid only through the oxidative pathway (respiration)
Why both tubes are needed
to distinguish between fermentation (F) and oxidation (O) accurately
Methyl Red (MR) Test - purpose
bacteria that ferment glucose to produce a number of organic acids such as lactic, acetic, succinic, and formic acids
MR
- Methyl Red Test
- Mixed acid fermentation
Acids produced in MR Test
lactic, acetic, succinic, and formic acids
Bacteria that test positive for MR Test
Escherichia, Salmonella, and Proteus
MR Test additional production in fermentation
CO2, H2, and ethanol
MR VP medium
Glucose broth buffered with peptone and dipotassium phosphate; detects acid production
What happens when enough acid is produced in the MRVP broth?
The pH drops to 5.0 or lower
To test for the presence of these acids in MR Test
Addition of methyl red indicator
→ turns red if pH ≤ 5
A positive methyl red test indicates that the organism has
carried out mixed acid fermentation
Voges-Proskauer Test / VP Test (2,3-Butanediol fermentation)
ferment glucose to produce limited amounts of some organic acids and primarily a more neutral end product, 2,3- butanediol
Voges-Proskauer (VP) Test - purpose
Detects 2,3-butanediol fermentation of glucose → indicates production of neutral end products instead of mixed acids
Organisms that test positive- VP Test
All species of Enterobacter and Serratia, and some Bacillus species
If an organism produces butanediol and is positive for the Voges-Proskauer (VP) test, it is usually negative for the
methyl red test
How VP test works
1. 2,3-butanediol is oxidized to acetoin.
2. Acetoin reacts with VP1 (alpha-naphthol) and VP2 (KOH).
3. Left 3-5 days to culture- Tube is shaken vigorously (to oxidize) and left 30 min.
4. Pink to red color indicates a positive VP test.
acetoin
a precursor in the synthesis of 2,3-butanediol
Positive VP test
pink to red
- acetoin is present
Citrate Test
Determines if a bacterium can use citrate as its sole carbon source
Positive citrate organisms
Enterobacter aerogenes and Salmonella typhimurium
- they cleave citrate to oxaloacetate and pyruvate, then ferment to produce end products
Enterobacter aerogenes and Salmonella typhimurium produce end products like
formate, acetate, lactate, acetoin, and CO₂
Ammonium salts that serve as a
sole nitrogen source
Ammonium salts role
organisms that use citrate also metabolize ammonium, producing ammonia, which alkalinizes the medium
Positive citrate test indicator
pH indicator:
dark green→ deep Prussian blue
- under alkaline conditions
SIM test - Hydrogen Sulfide Production (Sulfur reduction)
Detects whether bacteria can reduce elemental sulfur (SIM) to hydrogen sulfide (H₂S)
SIM
Sulfur, Indole, Motility
SIM medium contains
ferrous ammonium sulfate and sodium thiosulfate
- serve as indicators for the production of hydrogen sulfide (H2S)
H2S gas interacts with the ferrous ammonium sulfate and sodium thiosulfate to form
ferrous sulfide
Ferrous sulfide
a black precipitate
SIM: Indole production (Tryptophan degradation) purpose
Detects whether bacteria can degrade tryptophan to produce indole, ammonia, and pyruvic acid
The enzyme responsible for the cleavage of tryptophan is
Tryptophanase
Tryptophanase
cleaves tryptophan to produce indole
The degradation of tryptophan by the enzyme can be detected with
Kovac’s reagent
Kovac’s reagent
reacts with indole → produces deep red color if positive
Tryptone broth (1%)
is used because it is high in tryptophan
- from pancreatic digestion of protein
The major organelles of motility in bacteria are
flagella
Flagella
allow cells to move toward nutrients in the environment or move away from harmful substances, such as acid
chemotaxis
Cell movement that occurs in response to chemical stimulus
Flagella structure
- a rigid helical structure that
- extends as much 10 microns out from the cell
Flagella are very thin structures, less than 0.2 microns, and, therefore
Below the resolving power of a light microscope unless special staining is used
Flagella cause a bacterial cell to move because they
rotate
- in a way similar to a screw on a boat engine that rotates to propel a boat through the water
Two methods for observing motility
1. microscopically- wet mount
2. inoculating semisoft agar medium
Microscopic method for motility
Observe cells in a wet mount under a phase-contrast microscope
True motility=
cells move directionally (vectorially)
Brownian motion=
movement due to molecular bombardment of cells causing cells to shake or "wiggle about" but not move in any vectorial way
False motility due to currents
Cells can appear to move because of currents under the cover glass, caused by:
1. Pressure from focusing the oil immersion lens
2. Wet mount drying out
How to identify true motility
Look for rapid, directional swimming under the microscope; distinguish from wiggling (Brownian) or sweeping (currents)