1/31
Vocabulary practice flashcards covering digital radiography image processing stages, histogram mechanics, lookup tables, resolution determinants, and digital imaging terminology based on the lecture transcript.
Histogram
A smoothed bar graph plotting the frequency of pixel values or values of interest from raw image data, which functions alongside the lookup table to control image brightness and contrast.
Lookup Table (LUT)
An algorithmic mathematical formula of binary numbers (ones and zeros) that converts rescaled image pixel values into new numbers to refine image brightness and the scale of contrast.
Raw Data
The unprocessed data collected directly by the image receptor from the patient, encompassing all values located both inside and outside the collimation borders.
Values of Interest (VOI)
The specific numerical pixel values located inside the collimated exposure field that are extracted and utilized to generate the final image.
Rescaled Histogram
A blended histogram created when the computer algorithm merges the patient's actual raw values of interest with a preprogrammed anatomical model.
Region of Interest (ROI)
The collimated anatomical area identified by the computer where image data is collected and processed while excluding outside background data.
Spatial Resolution
The sharpness or ability of an imaging system to record small anatomical structures in fine detail, governed by matrix size, pixel size, field of view, and detector element size.
Matrix
A checkerboard-like arrangement of rows and columns composed of individual pixels used to construct a digital image.
Pixel
A picture element, typically square, that is assigned a specific numeric value corresponding to a distinct shade of gray.
Voxel
A three-dimensional volume element that represents the thickness of an anatomical slice, used predominantly in computed tomography (CT).
Pixel Pitch
The physical distance measured from the center of one pixel to the center of an adjacent pixel, where a shorter distance corresponds to higher spatial resolution.
Field of View (FOV)
The usable anatomical viewing area displayed on the monitor after cropping or collimating away unneeded outer margins.
Detector Element (DEL)
A microscopic hardware unit within a digital radiography detector containing a thin-film transistor (TFT), capacitor, and readout electronics that corresponds to an image pixel.
Modulation Transfer Function (MTF)
A measurement evaluating how accurately all parts of an imaging system work together to preserve anatomical detail and sharpness, rated on a scale from 0 to 1.0 (or 0% to 100%).
Spatial Frequency
A metric representing spatial resolution expressed in line pairs per millimeter (lp/mm) that is evaluated when assessing Modulation Transfer Function (MTF).
Quantization
The digital processing step in which the computer assigns a specific numerical value corresponding to a shade of gray to a pixel based on the captured X-ray signal strength.
Pixel Bit Depth
The total pool or range of numbers and shades of gray available to be assigned to pixels during quantization, determined by the binary numbering system of the system's CPU.
Grayscale
The comprehensive range of shades of gray established by an imaging system's bit depth from which pixels are displayed.
Contrast Resolution
The ability of a detector element to distinguish between anatomical structures that exhibit small changes in signal intensity from the exit beam, accurately recording subtle differences in subject contrast.
Dynamic Range
The range of X-ray exposure intensities that a detector element can accurately capture and convert into usable image data, spanning from minimally exposed to highly exposed regions.
Exposure Latitude
The margin of error or range of exposure factors at the radiographer's disposal that will produce a diagnostic-quality image at an appropriate patient dose.
Detective Quantum Efficiency (DQE)
A measure evaluating how effectively an imaging system converts the exit radiation beam into a diagnostic image while preserving an optimal signal-to-noise ratio.
Signal-to-Noise Ratio (SNR)
The proportion of useful diagnostic image information compared to the combined background quantum noise and electronic interference present in the captured signal.
Window Level
A post-processing control that adjusts image brightness by shifting the displayed range of numerical pixel values up or down.
Window Width
A post-processing control that adjusts image contrast by expanding or narrowing the total span of pixel values mapped across the displayed grayscale.
Edge Enhancement
A post-processing algorithm that artificially increases contrast along structural boundaries to sharpen demarcation, though excessive use can introduce noise and halo artifacts.
Smoothing
A post-processing filtering operation applied to suppress low-level digital noise, which concurrently reduces the overall scale of image contrast.
Equalization
An algorithm—also known as dynamic range compression—that alters overall contrast and compresses file size by subtracting the extreme light and dark areas of an image.
Flat-fielding
An automated preprocessing calibration technique applied to remove fixed-pattern noise and irregularities across the detector field, such as the anode heel effect.
Dead Pixel Correction
A preprocessing operation that assigns interpolated numerical values to defective or unresponsive detector elements by averaging data from neighboring functioning pixels.
Saturation
A gross overexposure artifact resulting from receiving 8 to 10 times the normal radiation exposure, producing completely flat, black anatomical areas incapable of post-processing recovery.
Shuttering
A post-processing manipulation technique also known as masking or cropping, where excess bright white light around collimated borders is replaced with a black background to eliminate veil glare.