Statics of Rigid Bodies

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/16

flashcard set

Earn XP

Description and Tags

Flashcards covering key definitions and principles of statics of rigid bodies, including force systems, distributed loads, equilibrium conditions, structural elements, cables, and friction.

17 Terms

1
New cards

What is statics?

The branch of mechanics that deals with the study of forces acting on a body in equilibrium, where the body is either at rest or in uniform motion.

2
New cards

How is a force defined in statics of rigid bodies?

A push or pull that creates motion or tends to create motion, or destroys or tends to destroy motion; it is the action of one body on another that tends to move a body in the direction of its action.

3
New cards

What are concurrent forces?

Forces that meet at one point, which may or may not be collinear.

4
New cards

What characterizes coplanar concurrent forces in a two-dimensional system?

Forces that meet at one point and whose lines of action also lie on the same plane.

5
New cards

What characterizes non-concurrent forces in a two-dimensional system?

Forces that do not meet at one point, but whose lines of action lie on the same plane.

6
New cards

What characterizes non-coplanar concurrent forces in a three-dimensional system?

Forces that meet at one point, but whose lines of action do not lie on the same plane.

7
New cards

What characterizes non-coplanar non-concurrent forces in a three-dimensional system?

Forces that do not meet at one point and whose lines of action do not lie on the same plane.

8
New cards

How are the magnitude and line of action of the resultant force determined for a surface load?

The magnitude equals the volume of the region between the load area and the load surface, and the line of action passes through the centroid of that volume.

9
New cards

How are the magnitude and line of action of the resultant force determined for a line load?

The magnitude equals the area under the load diagram, and the line of action passes through the centroid of that area.

10
New cards

What are the resultant conditions when a body is in equilibrium?

The resultant of all forces acting on the body is zero; thus, the resultant force RR and the resultant couple MM are both zero.

11
New cards

What are frames and what are they used for?

Types of structures often composed of pin-connected multi-force members (members subjected to more than two forces) used to support loads.

12
New cards

What is a truss?

A structure composed of slender members (such as wooden struts or metal bars) joined together at their end points.

13
New cards

What are planar trusses and where are they commonly applied?

Trusses that lie in a single plane, often used to support roofs and bridges.

14
New cards

What form does a cable of negligible weight take when supporting several concentrated loads?

It takes the form of several straight-line segments, each of which is subjected to a constant tensile force.

15
New cards

How is a cable subjected to a distributed load characterized in the special uniform case?

The loading is distributed uniformly along the horizontal, represented as w(x)=w0w(x) = w_0, where w0w_0 is the constant load intensity.

16
New cards

What is friction and how is its direction determined?

A force that resists the movement of two contacting surfaces that slide relative to one another; it always acts tangent to the surface at the points of contact and opposes possible or existing motion between the surfaces.

17
New cards

What is impending motion?

The condition occurring when contact surfaces are slippery enough that the frictional force cannot balance the acting forces, causing the block to tend to slip.