1/37
Flashcards covering heart anatomy, myocardial characteristics, cardiac cycle mechanics, electrical conduction, extrinsic neural control, hemodynamics, and blood composition.
What are the six major physiological functions of the cardiovascular system?
It delivers O2 and nutrients, removes CO2 and other waste, transports hormones and other molecules, supports temperature balance and controls fluid regulation, maintains acid–base balance, and regulates immune function.
What are the three major circulatory elements comprising the cardiovascular system?
The three major circulatory elements are the pump (heart), the channels or tubes (blood vessels), and the fluid (blood).
How are the four chambers of the heart organized by location and basic function?
The top receiving chambers are the right atrium (RA) and left atrium (LA), while the bottom pumping chambers are the right ventricle (RV) and left ventricle (LV).

Identify the five structural layers of the heart wall from the outermost sac to the innermost lining.
What is the key physiological difference between the pulmonary vein and peripheral veins?
The pulmonary vein carries oxygenated blood from the lungs into the left atrium, whereas peripheral veins carry deoxygenated blood from the body tissues back toward the heart.
Which heart valves are categorized as atrioventricular (AV) valves, and which are semilunar valves?
The tricuspid valve and mitral (bicuspid) valve are atrioventricular valves, whereas the pulmonary valve and aortic valve are semilunar valves.
What is the primary function of heart valves?
Heart valves prevent backflow and maintain unidirectional blood flow through the heart chambers and great vessels.
What is the complete anatomical pathway of pulmonary circulation through the right heart?
Superior and inferior vena cavae to right atrium (RA), through the tricuspid valve to right ventricle (RV), through the pulmonary valve to pulmonary arteries, and out to the lungs.
What is the complete anatomical pathway of systemic circulation through the left heart?
Lungs to pulmonary veins, into the left atrium (LA), through the mitral valve to left ventricle (LV), through the aortic valve to the aorta, and out to the entire body.
Why does the left ventricle possess the largest amount of myocardium and the thickest walls?
The left ventricle must pump blood throughout the entire systemic circulation against higher pressure, causing it to have the thickest muscular wall and to hypertrophy with both exercise and disease.
What muscle fiber type and cellular characteristics define cardiac muscle (myocardium)?
Cardiac muscle consists solely of type I fibers, characterized by high capillary density and a high number of mitochondria.
What two membrane structures comprise intercalated disks in cardiac muscle, and what are their respective functions?
Desmosomes provide mechanical strength between adjacent cells, and gap junctions allow rapid conduction of electrical action potentials.
How do skeletal muscle and cardiac muscle differ in fiber appearance, nucleus count, and stimulation mechanism?
Skeletal muscle consists of long, unbranched, multinucleated fibers stimulated voluntarily or by reflexes; cardiac muscle consists of branching, single-nucleated fibers connected by intercalated disks that contract involuntarily via spontaneous rhythmicity.
Which major coronary arteries supply blood to the myocardium, and what condition results from their atherosclerosis?
The right coronary artery supplies the right side of the heart and the left (main) coronary artery supplies the left side; atherosclerosis in these arteries leads to coronary artery disease.
How do diastole and systole differ in terms of mechanical activity and relative duration during the cardiac cycle?
Diastole is the relaxation and filling phase which lasts twice as long as systole; systole is the contraction and emptying phase.
What pressure and valvular events occur during ventricular diastole, and which heart sound is generated?
Ventricular pressure drops, semilunar valves close (producing heart sound 2, 'dub'), atrioventricular valves open, atria contract into the ventricles, and ventricular blood volume reaches end-diastolic volume (EDV).
What pressure and valvular events occur during ventricular systole, and which heart sound is generated?
Ventricular pressure rises, atrioventricular valves close (producing heart sound 1, 'lub'), semilunar valves open, ventricles contract to eject blood, and ventricular blood volume reaches end-systolic volume (ESV).
In which direction does blood flow in response to pressure differences within the cardiac cycle?
Blood flows down a pressure gradient from regions of high pressure to regions of low pressure.
During systole, does the right ventricle or the left ventricle contract first?
Both ventricles contract simultaneously to eject blood into the pulmonary and systemic circuits.

What electrical events correspond to the P wave, QRS complex, and T wave on an electrocardiogram (ECG)?
The P wave represents atrial depolarization, the QRS complex represents ventricular depolarization, and the T wave represents ventricular repolarization.
Is cardiac depolarization functionally identical to muscle contraction?
No; depolarization is an electrical event involving membrane ion shifts, whereas contraction is the subsequent mechanical event involving muscle shortening and tension generation.
What is the pathway of electrical signal conduction through the intrinsic cardiac conduction system?
Sinoatrial (SA) node to atria and atrioventricular (AV) node, down the AV bundle (bundle of His), into the left and right bundle branches, and through the Purkinje fibers into the ventricular walls.
What is the functional purpose of the conduction delay at the atrioventricular (AV) node?
The AV node delays signal transmission to allow the atria to contract completely and finish emptying their blood into the ventricles before ventricular systole begins.
How does parasympathetic nervous system stimulation affect cardiac activity, and what neurotransmitter is involved?
PNS impulses travel via the vagus nerve to the SA and AV nodes and release acetylcholine, which hyperpolarizes the cells and decreases heart rate.
What are the typical normal resting heart rate and maximal possible heart rate reported for cardiac regulation?
Normal resting heart rate is 60 to 80beat/min, and maximal possible heart rate is 250beats/min.
How does sympathetic nervous system stimulation influence heart activity?
Sympathetic nerves stimulate the release of norepinephrine from the adrenal medulla to facilitate depolarization at the SA and AV nodes, increasing both heart rate and contraction force.
What functional roles do arteries, arterioles, capillaries, venules, and veins play in the vascular tree?
Arteries act as pressure reservoirs carrying blood away from the heart; arterioles are resistance vessels controlling blood flow; capillaries provide exchange of nutrients and waste; venules collect blood from capillaries; and veins act as volume reservoirs returning blood to the heart using valves.
What are the formulas and definitions for Pulse Pressure (PP) and Mean Arterial Pressure (MAP)?
Pulse pressure is the force generated per contraction (PP=SBP−DBP), and Mean Arterial Pressure is the average pressure across the cardiac cycle (MAP=DBP+31PP).

Across which vascular division does the sharpest drop in mean systemic pressure take place?
Arterioles (the resistance vessels), where high systemic arterial pressures drop sharply to protect and feed capillary beds.
What are End-Diastolic Volume (EDV) and End-Systolic Volume (ESV), and what are their typical resting values?
EDV is the blood volume in the ventricle at the end of diastole (120mL/beat), and ESV is the blood volume remaining at the end of systole (50mL/beat).
How is Stroke Volume (SV) calculated, and what is its standard resting value using normal EDV and ESV?
SV=EDV−ESV. At rest, 120mL/beat−50mL/beat=70mL/beat.
What is Ejection Fraction (EF), how is it calculated, and what is its standard resting value?
EF is the clinical index of heart contractile function representing the percentage of EDV ejected during systole: EF=EDVSV=12070=58%.
What is Cardiac Output (CO), and what is its resting calculation for a heart rate of 70beat/min and stroke volume of 70mL/beat?
CO=HR×SV. At rest: 70beat/min×70mL/beat=4,900mL/min, or approximately 5L/min.

What is Total Peripheral Resistance (TPR), and what vessel parameter has the greatest influence on it?
Total Peripheral Resistance is the force that opposes blood flow provided by the physical properties of blood vessels; vessel radius is the most important factor.
How does blood distribution to skeletal muscles and the kidneys shift between rest (5L/min) and heavy exercise (25L/min)?
At rest, skeletal muscles receive 20% of CO via vasoconstriction and kidneys receive 80% via vasodilation; during heavy exercise, skeletal muscles receive 80% of CO via vasodilation and kidneys receive 20% via vasoconstriction.
What three physiological mechanisms determine venous return to the heart?
Venous return is determined by the skeletal muscle pump, the respiratory pump, and gravity.
How does body position (standing versus lying down) alter venous return and cardiac output?
When standing, gravity pulls blood toward the legs, lowering venous return and resulting in a lower cardiac output; when lying down, blood is evenly distributed, facilitating venous return and yielding a higher cardiac output.

What proportions of total blood volume are represented by plasma and formed elements, and what does hematocrit measure?
Plasma represents 55% and formed elements represent 45% (comprising 99% red blood cells, <1% white blood cells, and <1% platelets); hematocrit is the proportion of red blood cells relative to total blood volume.