1/43
Looks like no tags are added yet.
modem
A modulation/demodulation device that converts between digital and analog signals.
Broadband
A WAN technology where the network media and available bandwidth are shared between multiple customers. Typically asymmetrical bandwidth.
asymmetrical
A characteristic of transmission technology that offers faster download speeds than upload speeds.
DIA (dedicated Internet access)
A WAN service where the network media or a portion of its available bandwidth is dedicated to a single customer and comes with an SLA-defined guarantee of minimum uptime percentages and maximum recovery times if the service goes down.
symmetrical
A characteristic of transmission technology that offers the same download speeds as upload speeds.
bandwidth speed tester
A website that tests the current upload and download speeds on a WAN connection.
DSL (digital subscriber line)
A WAN connection technology that operates over the PSTN (public switched telephone network) and can support multiple data and voice channels over a single line.
PSTN (public switched telephone network)
The network of lines and carrier equipment that provides wired telephone service to most homes and businesses
DSL modem
A device that modulates a DSL signal between the ISP’s telephone line and the customer’s Ethernet network
Cable broadband
Broadband Internet access provided over the coaxial cable wiring used for TV signals.
DOCSIS (Data Over Cable Service Interface Specifications)
An international, cooperative effort orchestrated by Cable-Labs that standardized cable broadband service.
cable modem
A device that modulates and demodulates signals for transmission and reception via cable wiring.
leased line
Dedicated Internet bandwidth provided over fiber-optic connections. Offers SLA backed guarantee and symetrical bandwidth.
point-to-point connection
Â
A direct line that connects two locations and provides a private network for communications over this link.
MPLS (multiprotocol label switching)
A type of switching that enables multiple types of layer 3 protocols to travel over any one of several connection-oriented layer 2 protocols. Routers read a short label that tells routers where the data should go and saves time and improves speed.
Direct connection
A leased line from a customer’s location or from their ISP to a PoP (point of presence), or colocation, which provides connection with other providers (such as cloud providers). Also called an interconnection.
PoPs (points of presence)
A data center facility at which a provider rents space to allow for dedicated connection services.
colocation facility
A data center facility that is shared by a variety of providers. Also called a carrier hotel.
SD-WAN (software-defined wide area network)
Abstracted, centralized control of networking devices that manage network functions across a diverse infrastructure.
Allows for dynamic routing, centralized software dashboard control that can apply changes over all networking devices, and is transport agnostic.
AAR (application-aware routing)
The direction of traffic according to the performance needs of application data contained in messages.
cell site
The combination of a cellular antenna array and its base station.
4G (fourth generation)
Fourth-generation mobile phone service that is characterized by an all-IP network for both data and voice transmission and throughput of 100 Mbps up to 1 Gbps.
LTE (Long-Term Evolution)
A transitional cellular network technology between 3G and 4G that takes advantage of some improved 4G technologies to exceed 3G speeds but does not reach 4G throughput requirements.
LTE-A (LTE-Advanced)
The latest version of LTE, with theoretical downlink rates approaching true 4G speeds up to 1 Gbps and uplink rates as high as 100 Mbps, although actual speeds are significantly less. Sometimes misleadingly called 5G E (5G Evolution).
5G (fifth generation)
Fifth-generation mobile phone standard requiring minimal throughput of 1 Gbps and maxing out at 20 Gbps download and 10 Gbps upload. Actual speeds vary greatly depending on the bands, cell density, channels, and client volume.
best path
The most efficient route from one network to another, as calculated by a router.
Core routers
A router that directs data between networks within the same autonomous system. Also called an interior router.
AS (autonomous system)
A group of networks, often on the same domain, that are operated by the same organization.
Edge routers
A router that connects an autonomous system with an outside network—for example, the router that connects a business to its ISP. Also called a border router.
Exterior router
A router that directs data between autonomous systems, for example, routers used on the Internet’s backbone.
routing table
A database stored in a router’s memory that maintains information about the location of hosts and networks and the best paths for forwarding packets between them. Addresses
metric
A route rating system used as a tie breaker when selecting a route in a route table containing multiple matching routes to a destination.
prefix
The network portion of an IP address; given multiple options in a routing table, a router will choose a route with the longest matching prefix.
prefix length
The number of bits included in the prefix.
default route
A backup route, usually to another router, used when a router cannot determine a path to a message’s destination.
gateway of last resort
The router on a network that accepts all unroutable messages from other routers.
Static routing
The manual creation of routes configured by a network administrator to direct messages along specific paths between networks.
Dynamic routing
The creation of routes automatically calculated by the router to determine the best path between two networks. As dynamic routes are identified and calculated, this information is collected in a routing table.
route utility
A command-line utility used to show or change a host’s routing table.
Routing cost
A value assigned to a particular route as judged by the network administrator—the more desirable the path, the lower its cost.
routing protocols
A set of standards that determines how routers communicate with each other about network status and connections. Routing protocols determine the best path for data to take between networks.
AD (administrative distance)
A number indicating a protocol’s reliability, with lower values being given higher priority. This assignment can be changed by a network administrator.
Convergence time
The time it takes for routers on a network to recognize and adjust to configuration changes or a network outage.
Overhead
Definition:The burden placed on the underlying network to support a routing protocol.