AQA A-Level Chemistry Organic synthesis

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/11

encourage image

There's no tags or description

Looks like no tags are added yet.

12 Terms

1
New cards

Aliphatic Synthesis: Alkanes, Alkenes & Halogenoalkanes

Alkane -> halogenoalkane: Br2/Cl2, UV light (free radical substitution). Halogenoalkane -> alkene: ethanolic KOH, heat (elimination). Alkene -> halogenoalkane: HBr/HCl (electrophilic addition); Alkene -> dihalogenoalkane: Br2/Cl2, room temp; Alkene -> poly(alkene): high pressure, catalyst; Alkene -> alcohol: step 1 H2SO4, step 2 H2O warm.

2
New cards

Aliphatic Synthesis: Alcohols, Carbonyls & Carboxylic Acids

Halogenoalkane -> alcohol: aqueous KOH, warm (nucleophilic substitution). Alcohol -> alkene: conc H2SO4 or H3PO4, heat (dehydration). 1° alcohol -> aldehyde: limited Na2Cr2O7/H+, warm and distil; 1° alcohol -> carboxylic acid: excess Na2Cr2O7/H+, reflux; 2° alcohol -> ketone: Na2Cr2O7/H+, reflux. Aldehyde/ketone -> alcohol: NaBH4 (nucleophilic addition).

3
New cards

Aliphatic Synthesis: Nitriles, Amines & Acyl Derivatives

Halogenoalkane -> nitrile: KCN in ethanol/water, reflux; Nitrile -> 1° amine: LiAlH4 in dry ether (reduction). Halogenoalkane -> 1° amine: excess alcoholic NH3, heat under pressure. Aldehyde/ketone -> hydroxynitrile: KCN + H2SO4. Acyl chloride/acid anhydride + H2O -> carboxylic acid; + alcohol -> ester; + NH3 -> 1° amide; + 1° amine -> 2° amide (all room temp, nucleophilic addition-elimination).

4
New cards

Aromatic Synthetic Routes

Benzene -> nitrobenzene: conc HNO3 + conc H2SO4 (electrophilic substitution); Nitrobenzene -> phenylamine: Sn + HCl, heat (reduction). Benzene -> phenyl ketone: RCOCl + anhydrous AlCl3 (Friedel-Crafts acylation). Side chains undergo normal aliphatic reactions (e.g., phenylamine + CH3Cl -> N-methylphenylamine; phenyl ketone + NaBH4 -> secondary alcohol).

5
New cards

Designing Green & Efficient Synthetic Routes

Chemists avoid solvents where possible because separating products from solvents is costly and lowers yield. Routes with fewer steps give higher overall yields, and reactions with high percentage atom economy produce fewer side products, reducing separation costs and waste for higher sustainability.

6
New cards

Distillation vs Reflux & Apparatus Rules

Distillation separates volatile liquids at their boiling point (thermometer bulb at T-junction); reflux heats mixtures long-term while condensing vapours back into the flask. Water enters the bottom of the condenser (against gravity), anti-bumping granules prevent uneven boiling, electric heaters avoid fire with flammable liquids, and the condenser top must NEVER be sealed (pressure build-up causes explosion).

7
New cards

Fractional Distillation & Measuring Boiling Point

Fractional distillation separates miscible liquids with different boiling points: the most volatile vapour (lowest b.p.) reaches the top of the fractionating column first and condenses into the receiver, while higher-b.p. vapours condense back into the flask. Measuring boiling point (thermometer bulb above liquid surface in saturated vapour) checks purity, though pressure changes affect b.p. and different compounds can share the same b.p..

8
New cards

Purifying an Organic Liquid

  1. Put impure distillate in a separating funnel and wash with NaHCO3 solution (neutralises acid impurities; shake and vent CO2 pressure) and/or saturated NaCl solution (helps separate layers). 2. Run off and discard the lower aqueous layer. 3. Add a drying agent (anhydrous Na2SO4 or CaCl2, insoluble and unreactive) to the organic layer until clear. 4. Carefully decant into a flask and redistil.
9
New cards

Purifying an Organic Solid: Recrystallisation

  1. Dissolve impure solid in minimum volume of hot solvent (forms saturated solution). 2. Hot filter through fluted paper quickly (removes insoluble impurities without crystallising). 3. Cool in ice (crystals form; soluble impurities stay dissolved). 4. Suction filter with Buchner funnel/flask and water pump. 5. Wash with cold distilled water and dry between absorbent paper (wet crystals give >100% yield).
10
New cards

Testing Purity via Melting Point Determination

Place a small sample in a capillary tube strapped to a thermometer in high-b.p., low-flammability heating oil (or electronic apparatus) and heat slowly near the melting point. Pure solids melt sharply at the data-book value; impurities (including leftover solvent) lower the melting point and widen the melting range over several °C.

11
New cards

Summary of Functional Group Test-Tube Reactions

Alkene: bromine water decolourises. Aldehyde: Tollens' reagent (warm) gives silver mirror; Fehling's solution (warm) turns blue to red Cu2O precipitate. Carboxylic acid: Na2CO3 gives CO2 fizzing. 1°/2° alcohol or aldehyde: acidified dichromate turns orange to green. Chloroalkane: warm with AgNO3 gives slow white AgCl precipitate; Acyl chloride: AgNO3 gives vigorous steamy HCl fumes and rapid white AgCl precipitate.

12
New cards