1/22
Vocabulary flashcards covering the definitions, biomechanical roles, anatomic guidelines, and components of major and minor connectors in removable partial prosthodontics.
Major Connector
The component of a removable partial denture that joins the components on one side of the dental arch to those on the opposite side, distributing applied forces throughout the arch and minimizing torque to individual teeth.
Cross-Arch Stabilization
The biomechanical phenomenon in which a rigid major connector limits movement possibilities of a removable partial denture by acting as a counteracting lever across the dental arch.
Lingual Bar
A basic mandibular major connector with a half-pear cross-sectional shape that requires a minimum of 8mm of vertical space between the free gingival margin and the movable floor of the mouth, with its superior border placed at least 4mm below the gingival margins.
Linguoplate (Lingual Plate)
A mandibular major connector consisting of a half-pear-shaped inferior border and a thin metallic apron extending superiorly to contact the cingula of anterior teeth and interproximal contact areas; indicated when less than 8mm of space exists between the gingival margin and the floor of the mouth.
Sublingual Bar
A mandibular major connector modification of the lingual bar that lies inferior and posterior to the usual position, parallel to the anterior floor of the mouth; indicated when the distance from the gingival margins to the floor of the mouth is less than 6mm.
Cingulum Bar (Continuous Bar)
A thin, narrow (3mm) mandibular metal strap major connector located on or slightly above the cingula of anterior teeth, scalloped to follow interproximal embrasures, and supported bilaterally by definitive rest seats.
Mandibular Labial Bar
A half-pear-shaped major connector positioned on the labial and buccal aspects of the mandible, located at least 4mm inferior to gingival margins; indicated when extreme lingual inclination of teeth or severe inoperable lingual tori prevent the use of a lingual connector.
Swing-Lock Design
A removable partial denture design concept incorporating a hinged continuous labial or buccal bar with a latching mechanism at the opposite end, utilizing all remaining natural teeth for retention and stabilization.
Single Palatal Strap
A rigid, flat maxillary major connector spanning bilateral edentulous spaces of short span in tooth-supported restorations (Kennedy Class III), with cast framework material distributed in three planes.
Combination Anterior-Posterior Palatal Strap
A rigid maxillary major connector consisting of a flat anterior strap and a posterior strap (minimum of 8mm in width) joined by lateral longitudinal connectors to form a rigid parallelogram frame.
Palatal Plate-Type Connector
A thin, broad maxillary major connector covering one-half or more of the hard palate that uses corrugated contours to replicate anatomic rugae, providing rigidity, uniform thinness, and thermal conductivity without excess bulk.
U-Shaped Palatal Connector
A maxillary major connector running along the anterior palate that is biomechanically the least rigid design; indicated primarily when a large, inoperable palatal torus extends to the posterior limit of the hard palate.
Single Palatal Bar
A maxillary major connector component defined as having a width of less than 8mm, requiring concentrated bulk for rigidity and crossing centrally between denture halves.
Beading
The scribing of a shallow groove (approximately 0.5mm in depth and width, or half the depth of a size 4 round bur) on the maxillary master cast along the borders of a palatal major connector to provide a visible finish line and ensure intimate tissue contact.
Minor Connector
The component of a removable partial denture that serves as the connecting link between the major connector or base and other prosthesis components, such as clasp assemblies, indirect retainers, and rests.
Proximal Plate
A minor connector contacting the guiding plane surface of an abutment tooth, extending from the marginal ridge to two-thirds the length of the enamel crown, with a triangular cross-section whose base faces lingually.
Open Latticework
A ladderlike physical retention minor connector composed of longitudinal and transverse struts used to attach resin denture bases, allowing acrylic resin to wrap completely around the framework.
Meshwork
A physical retention minor connector resembling a rigid metallic screen with openings that permit acrylic resin to penetrate and mechanically encircle the metal for denture base retention.
Metal Base
A denture base construction where the metal framework rests directly on the supporting ridge tissue without underlying relief, retaining teeth through beads, nailheads, or wire loops; this type cannot be relined.
Tissue Stop
An integral part of a denture base minor connector that contacts the residual ridge to provide a defined spacer between the framework and supporting tissues, stabilizing the framework during transfer and resin processing.
Finish Line
The junction between the metal framework and the acrylic resin denture base forming a butt-type joint with an angle not greater than 90∘, establishing a smooth, definitive transition between dissimilar materials.
Internal Finish Line
The finish line junction between the metal framework and the denture base resin located on the intaglio (tissue) surface of the framework.
External Finish Line
The finish line junction between the metal framework and the denture base resin located on the polished (nontissue) surface of the framework.