1/41
Comprehensive vocabulary flashcards covering the properties, testing methods, apparatus, and equipment for cement, concrete, timber, stone, metals, RCC, and universal testing machines.
Compressive Strength (Cement)
The property of cement referring to its ability to resist compressive forces.
Soundness (Cement)
The property of cement referring to its ability to retain volume and not expand excessively after setting.
Setting Time
The property of cement referring to the time it takes to begin and complete hardening.
Fineness (Cement)
The property of cement referring to the size of its particles, which controls the hydration rate and early strength.
Vicat Apparatus
An instrument used to measure consistency as well as initial and final setting times of cement paste and mortar.
Le Chatelier Mould
A mould used in soundness testing to measure expansion in cement caused by excess lime or magnesia.
Blaine Air Permeability Apparatus
An apparatus used in the fineness test to determine cement particle size.
Slump Test
A test that uses a cone to assess the consistency and workability of freshly mixed concrete.
Durability (Concrete)
The property of concrete referring to its ability to resist weathering and chemical attack.
Workability (Concrete)
The property of concrete referring to the ease of mixing, transporting, and placing.
Creep (Concrete)
The time-dependent deformation of concrete occurring under sustained load.
Shrinkage (Concrete)
The volume reduction of concrete caused by water loss.
Split Tensile Strength Test
A test that indirectly measures concrete tensile strength by applying a compressive load to a cylinder along its diameter.
Flexural Strength Test
A test that measures the bending strength of concrete beams or timber members.
Core Test
A test involving drilling hardened concrete specimens from structures to assess in-situ strength.
Softwood
A timber classification derived from coniferous trees.
Hardwood
A timber classification derived from deciduous trees.
Timber Seasoning
The process of reducing moisture in timber to prevent warping, shrinkage, and swelling before use or testing.
Toughness (Stone)
The property of stone that refers to its resistance to impact loads or shock.
Acid Test (Stone)
A test that evaluates a stone's resistance to acid attack and chemical degradation in polluted environments.
Cast Iron
A ferrous metal characterized by high compressive strength and brittleness.
Steel
A ferrous metal that is ductile, weldable, and strong in tension.
Wrought Iron
A tough, ductile, and corrosion-resistant ferrous metal commonly used for decorative applications.
Ductility
The mechanical property of a metal referring to its ability to deform plastically without breaking.
Brinell Hardness Test
A hardness test method that employs a hardened steel ball indenter, typically used on softer metals.
Rockwell Hardness Test
A rapid and widely used hardness testing method that utilizes a cone or ball indenter.
Vickers Hardness Test
A hardness test utilizing a diamond pyramid indenter, especially suitable for thin materials and coatings.
Impact Test (Charpy/Izod)
A testing method measuring the energy absorbed during fracture to assess material toughness under sudden loads.
Fatigue Test
A test that measures the endurance and behavior of a metal under repeated cyclic loading.
Bend Test
A test that evaluates ductility by bending a metal specimen without the development of cracks.
Salt Spray Test
An accelerated environmental test simulating salty air exposure to evaluate corrosion resistance.
Water Retentivity Test
A test measuring mortar's capacity to retain water, maintain workability, and secure bonding with masonry units.
Bond Strength Test
A test determining the ability of mortar to adhere to masonry units to facilitate proper load transfer.
Flow Table Test
A test using a flow table to evaluate the consistency, workability, and ease of placement of mortar.
Reinforced Cement Concrete (RCC)
A composite construction material combining concrete's compressive capacity with steel reinforcement's tensile strength.
Working Stress Design (WSD)
An RCC structural design methodology based on elastic behavior under service loads.
Ultimate Strength Design (USD)
An RCC design methodology that incorporates safety factors and accounts for ultimate failure modes.
Load Frame (UTM)
The rigid main structure of the Universal Testing Machine that supports components and prevents unwanted deflection.
Crosshead (UTM)
The movable component of the UTM that travels vertically to apply tensile or compressive loads to a specimen.
Load Cell (UTM)
A high-accuracy transducer in the UTM that measures the force applied to the test specimen.
Actuator (UTM)
The UTM mechanism powered by pressurized oil or a motor system that drives crosshead motion.
Extensometer (UTM)
An optional instrument used with a UTM to measure the strain or elongation of a specimen during mechanical testing.