1/55
Looks like no tags are added yet.
sig fig rules for multiplication and division
final answer must have same number of SIG FIGS as the number in the problem with the least number of sig figs
sig fig rules for addition and subtraction
the answer has the same number of decimal places as there are in the measurement with the fewest decimal places
sig fig rules for logs
the answer has the same number of decimal places as the original number has sig figs (Ex. log(552) = 2.742)
sig fig rules for exponents
the answer has the same number of sig figs as the original number has decimal places (ex. 10^-5.51 = 3.1 x 10^-6)
sig fig rules for standard deviation
answer has the same number of decimal places as the average
you ___________ gain extra accuracy in an average
CANNOT ((3.8 + 4.1 + 4.1) รท 3 = 12.0 รท 3 = 4.0 NOT 4.00)
tera
10^12
giga
10^9
mega
10^6
kilo
10^3 (1000)
hecto
10^2 (100)
deca
10^1 (10)
deci
10^-1
centi
10^-2
mili
10^-3
micro
10^-6
nano
10^-9
pico
10^-12
SI unit for mass
kilogram (kg)
SI unit for length
meter (m)
SI unit for time
second (s)
SI unit for temperature
Kelvin (K)
SI unit for amount of a substance
mole (mol)
dimensional analysis
a technique of problem-solving that uses the units that are part of a measurement to help solve the problem
- carry the units throughout the calculation
Erlenmeyer flask
least accurate (5)
Beaker
next to lease accurate (4)
graduated cylinder
middle accuracy (3)
Graduated (Serological) Pipette
next to best accuracy (2)
Volumetric flask/pipet buret
best accuracy (1)
When measuring with a Buret, Graduated pipet, Graduated cylinder, or Beaker...
measure to the nearest given measurement and then estimate one more number place
Graphic format
- black outline
- caption BELOW the figure
- citation if you don't own the material
- bold "Figure #" in caption
Table format
- caption ABOVE the figure
- bold headings inside the table and grey shading
- keep inside vertical borders and remove inside horizontal borders
- bold "Table #"
graph format
- caption BELOW the figure
- Appropriate title and axis titles (with units)
- Usually y-axis vs. x-axis (typo in lab manual)
- Appropriate legend
- bold "figure #"
- Center the data (don't include the excess space)
- Clear indication of equations/trend lines
directly proportional relationship
A relationship between two variables in which one is a constant multiple of the other.
y = kx

Inversely proportional relationship
If all other variables are held constant, the magnitude or absolute value of one inversely proportional variable will decrease if the other variable increases, while their product (the constant of proportionality k) is always the same.
xy = k

Logarithmically proportional relationship
y = k log(x)

Metathesis rxn (double displacement rxn)
AB + XY โ AY + XB
redox reaction
the movement of electrons from one molecule to another
Single replacement rxn (100% redox)
A + XY โ AY + X
Combination rxn
A + B + C โ ABC
Decomposition rxn
XYZ โ X + Y + Z
Percent Yield=
actual yield/theoretical yield x 100%
Positive error:
not dried, didn't filter the paint out, etc
Negative error:
paint on the aluminum can, limited reaction
time, etc
Purpose of experiment 11 (water hardness)
Determine the Ca2+/Mg2+ concentration in the tap water
Tool of experiment 11 (water hardness)
Titration by using EDTA
Problem of experiment 11 (water hardness)
Accurate concentration of EDTA is unknown (~ 0.01 M)
Solution of experiment 11 (water hardness)
Standardization of EDTA by titrating CaCl2 solution with known concentration (0.0100 M)
molarity (M)
M1V1 = M2V2
Eriochrome Black T (EBT) is the...
indicator
Before titration
magenta
durring titration
purple
purpose of experiment 12 (Enthalpy)
Determine the enthalpy change for an acid-base reaction
Problem of experiment 12 (Enthalpy)
- Calorimeter also absorbs heat
- Calorimeter is not perfectly insulated
Solution of experiment 12 (Enthalpy)
Find the calorimeter constant to calibrate the results
final temperature =
y-intercept