1/29
Comprehensive vocabulary flashcards covering diet therapy in food allergies and febrile conditions, thermodynamic principles of cooling, chilling, freezing, and thawing, osmotic dehydration kinetics, industrial dehydrators, and specialized industrial oven categories.
Food Allergy
An abnormal immunological response to a food protein that occurs when extrinsic antigens are recognized by a sensitized individual, triggered by minute amounts of the allergen and capable of being severe or life-threatening.
Food Intolerance
A non-immunological adverse reaction to food arising from pharmacological effects, enzyme deficiencies (such as lactase deficiency), irritants, or toxic effects, typically requiring relatively large quantities of food to manifest.
IgE-Mediated Food Allergy
An early-onset allergic reaction occurring within minutes to an hour after ingestion, driven by antibodies binding to mast cells and basophils to trigger the release of histamine and cause urticaria, angioedema, vomiting, or anaphylaxis.
Non-IgE Mediated Food Allergy
A cell-mediated, delayed-onset allergic reaction taking 1 to 3 days to develop, driven by T cells and macrophages triggering inflammation, such as in Celiac disease or food-sensitive enteropathy.
Double-Blind, Placebo-Controlled Food (DBPCF) Challenge
The recognized standard clinical procedure for diagnosing food allergies, in which suspected allergens or placebos are administered without the subject or evaluator knowing which is being tested.
Basal Metabolic Rate in Fever
The rate of energy expenditure at rest during a febrile state, which increases by approximately 13% for every 1∘C rise in core body temperature.
Fevers of Unknown Origin (FUO)
Unexplained febrile episodes exceeding 37.3∘C documented on several occasions over a minimum period of 3 weeks in patients without neutropenia or immunosuppression.
Cooling
The removal of sensible heat to reduce food temperature to approximately ambient levels (around 21∘C), serving as a preliminary handling operation or for short-term quality preservation.
Chilling and Refrigeration
Holding food products at temperatures above their initial freezing point, typically between 0∘C and 5–8∘C, to slow microbial growth, enzymatic activity, and respiration without forming ice.
Freezing
The reduction of food temperature below its freezing point—commonly down to −18∘C or lower for long-term storage—converting a substantial proportion of liquid water into solid ice crystals.
Sensible Cooling Heat Removal (Q)
The quantity of heat removed to decrease temperature without causing a phase transition, calculated as Q=mCPΔT, where m is mass, CP is specific heat capacity, and ΔT is temperature change.
Latent Heat of Freezing (Q)
The thermal energy extracted from a product during a phase transition from liquid water to ice at constant temperature, calculated using Q=mL, where L is the latent heat of fusion.
Hydrocooling
A rapid pre-cooling method where cold water directly contacts produce via spraying or immersion, providing substantially faster heat transfer rates than cold-air cooling.
Vacuum Cooling
A rapid cooling process that reduces chamber pressure around porous products with high surface-area-to-volume ratios, inducing rapid evaporation of surface water to remove latent heat.

Vapor Compression Cycle
A continuous thermodynamic cycle consisting of compression, condensation, expansion, and evaporation, which absorbs low-temperature heat (QL) from a refrigerated space and rejects high-temperature heat (QH) to the surroundings.

Freezing Rate and Ice Crystal Morphology
The thermodynamic speed of heat removal; rapid freezing promotes small, uniform intracellular ice crystals preserving tissue integrity, while slow freezing creates large, irregular extracellular crystals that cause cellular disruption.
Drip Loss
The exudate liquid released from thawed food tissues that fail to reabsorb melted ice water due to membrane damage, calculated as mass before freezingmass before freezing−drained mass after thawing×100.
Individual Quick Freezing (IQF)
A specialized freezing process where particulate foods are frozen separately and rapidly, preventing piece agglomeration into a solid frozen block.
Freezer Burn
Surface desiccation and quality deterioration in frozen foods resulting from moisture sublimation from exposed surfaces during extended storage.

Novel Thawing Methods
Emerging electro-physical and wave-based defrosting technologies—such as high-pressure, pulsed electric field, magnetic field, radio frequency, microwave, ohmic, and ultrasound thawing—designed to accelerate thaw rates and reduce drip loss.
Cold Chain
An unbroken system of continuous temperature management and monitoring covering production, pre-cooling, cold storage, refrigerated transportation, retail display, and final consumption.
Osmotic Dehydration
A non-thermal, multi-component diffusion preservation process wherein fruits or vegetables are immersed in a hypertonic solution, causing water to diffuse outward across semi-permeable cell membranes while solutes migrate inward.
Pectinmethylesterase (PME)
An enzyme combined with calcium ions (Ca2+) in osmotic pretreatments to strengthen cell walls, improve firmness, and compensate for tissue distortion caused by freezing and subsequent thawing.
Case Hardening
A drying defect where the exterior surface of a food product dries too quickly, creating an impenetrable outer crust that traps internal moisture and increases spoilage risk.
Industrial Dehydrator Oven
An engineered thermal drying unit operating at low temperatures (30∘C to 70∘C) using high-volume, high-velocity airflow to continuously strip away humid boundary layers without cooking the food.
Industrial Batch Oven
A thermal chamber (such as a walk-in, reach-in, or cabinet oven) engineered to heat discrete, large-volume loads of products simultaneously through one complete thermal cycle for curing, baking, or annealing.
Conveyor Oven
A continuous industrial oven featuring motorized mesh or belt conveying systems and multi-zone heating chambers tailored for automated, high-throughput in-line thermal processing.
Industrial Curing Oven
A specialized heating unit reaching temperatures up to 800∘F (426∘C) designed to initiate chemical reactions and cross-linking to bond powder coatings, paints, or adhesives onto substrates.
Infrared (IR) Oven
An energy-efficient industrial oven utilizing high-intensity infrared electromagnetic radiation to deliver instant full-power heating for targeted surface applications, coating curing, and sintering.
Vacuum Oven
An industrial chamber that lowers atmospheric pressure during heating, preventing oxidation and allowing low-temperature moisture removal from delicate, heat-labile, or contamination-sensitive materials.