1/21
Looks like no tags are added yet.
What does ACL stand for?
Access Control List
ACLs are an ordered sequence of […]
ACEs (Access Control Entries)
ACLs must be […] to take effect.
applied to an interface
ACLs can be applied to an interface […] or […]
inbound / outbound
In what order do routers check the ACEs of an ACL?
Top to bottom
When a packet matches an ACE in an ACL, what happens to the remaining entries below the matching entry?
They are ignored (not checked/processed)
How many ACLs can be applied to a single interface?
Two:
What will happen if a packet doesn’t match any of the entries in an ACL?
It will be dropped
The […] tells the router to deny all traffic that doesn’t match any of the configured entries in the ACL.
implicit deny
[…] IP ACLs can match based on source IP address only.
Standard
[…] IP ACLs can match based on source/destination IP address and source/destination Layer 4 port.
Extended
What ranges of numbers can be used to identify standard numbered ACLs?
1-99, 1300-1999
Configure a standard numbered ACL entry, specifying the IP/mask.
R1(config)# […]
"Configure a standard numbered ACL entry, permitting or denying all source IPs.
"Configure a remark for standard numbered ACL:
"View all ACLs on the router:
"View all IP ACLs on the router:
Standard ACLs should be applied as close to the […] as possible.
destination
[…] ACLs should be applied as close to the destination as possible.
Standard
"Apply an ACL to an interface:
"Enter standard named ACL config mode:
"Configure a permit or deny entry for a standard named ACL:
[entry-number] {deny | permit} ip wildcard-mask