1/19
Looks like no tags are added yet.
define separating/party walls
walls that divide on house from another i.e. in terraced dwellings
define compartment walls
walls that divide a building into fire resisting compartments to restrict the spread of fire.
any separating wall must also be constructed as a compartment wall
define buttressing walls
walls that are built at right angles to another internal/external wall to provide structural restraint
define partition walls
walls that sub-divide the space enclose by external walls of a building
functions of walls
physical separation of space - enclose/divide
strength and stability - support upper floors & roof
general rule of determining if a wall is (non)loadbearing
1B thick → loadbearing
1/2B thick → non-loadbearing
general rule of thickness to height ratio of loadbearing walls
thickness >= 1/16th height
which section of building regulations covers minimum thickness, height and length of a wall?
approved document A section 2c10
minimum thickness of walls at a specified heigh and length
minimum thickness 90mm: height & length ≤ 9m
minimum thickness 140mm: height and length12m≥T>9m
if weight of external wall (sum of both leaves) is less than 120kg/m2, openings on each floor should be….
no less than 1m high and not more than 700mm from the face of sound resisting wall
building regulations on fire resistance
minimum 30mins fire resistance in dwellings
material must have low combustibility
separating walls MUST be constructed as compartment walls
separating walls must run FULL HEIGHT of the building
what section of the building regs is the sound insulation of separating walls included?
document e section 2
what are the main considerations of the building regs for separating walls?
sound insulation and fire resistance
why do the building regulations for solid masonry separating walls stipulate an overall minimum mass per area of wall?
mass is good at insulating airborne sound between properties connected by separating wall
minimum mass per unit area of solid brick wall w/ plaster/plasterboard on both sides
375kg/m2
minimum mass per unit area of solid concrete block wall w/ plaster/plasterboard on both sides
415kg/m2
minimum mass per unit area of dense concrete block cavity wall w/ plaster/plasterboard on both sides and a minimum cavity of 50mm
375kg/m2
minimum mass per unit area of lightweight aggregate concrete block with a minimum cavity of 75mm
plaster to both room faces - 300 kg/m2
plasterboard to both room faces - 275 kg/m2
purpose of partition walls
internal walls which divide interior of building into areas of accommodation and circulation