ME 9: Engineering Graphics and Design - Orthogonal Projections, Dimensioning, Tolerancing, and View Representation

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/38

flashcard set

Earn XP

Description and Tags

Comprehensive practice flashcards covering engineering drawings, orthogonal and pictorial projections, dimensioning principles, conventional tolerancing, fit classifications, and geometric dimensioning and tolerancing (GD&T).

39 Terms

1
New cards

Model-Based Definition (MBD)

An approach to creating 3D CAD models such that they contain all necessary manufacturing and geometry data, serving as the central source authority that drives downstream engineering activities across organizations.

2
New cards
<p>Orthogonal Projection</p>

Orthogonal Projection

A method of projecting a 3-D object onto a viewing plane by rays that are perpendicular to that plane, depicting edges parallel to the plane in their true length.

3
New cards

Glass Box Approach

A visualization model where a 3-D object is conceived as enclosed within six transparent viewing planes that unfold flat into a single plane to display the six standard multi-view projections.

4
New cards

Preferred Multi-view Configuration

The standard arrangement of engineering drawings that uses the minimum number of views necessary—specifically the front, top, and right-side views—to completely communicate object geometry.

5
New cards

Object Lines

Bold, dark solid lines on an engineering drawing that represent visible edges, boundaries, and surface intersections of a part.

6
New cards

Hidden Lines

Equally spaced dashed lines used to denote obscured edges, surfaces, or contours that cannot be seen from a specific viewing direction.

7
New cards

Third-Angle Projection

An orthographic projection convention standard in the United States where the top view is placed above the front view and the right-side view is positioned to the right of the front view.

8
New cards

First-Angle Projection

An orthographic projection system standard in Europe and Asia where the object sits between the observer and the projection planes, placing the top view below the front view and the right-side view to the left of the front view.

9
New cards

Axonometric Drawings

A class of pictorial drawings meaning "to measure along axes," categorized into isometric (all three normal surface angles equal 120∘120^\circ), dimetric (two angles equal), and trimetric (no angles equal).

10
New cards

Perspective Drawings

Pictorial drawings that depict objects with lines converging toward one, two, or three vanishing points on a horizon, producing the most realistic visual appearance.

11
New cards

Full Section View

A section view produced by an imaginary cutting plane passing entirely through an object along a single straight plane, exposing internal features and eliminating confusing hidden lines.

12
New cards

Offset Section View

A section view created with a stepped cutting plane that bends at right angles to pass through multiple offset interior features, revealing them within a single combined view.

13
New cards

Half Section View

A section view of a symmetrical object created by removing one quadrant, illustrating half of the part as an exterior view and the other half in section.

14
New cards

Auxiliary View

An orthographic view projected onto a plane parallel to an inclined or oblique surface, used to display that surface's true size, true shape, and true angular relationships.

15
New cards

ASME Y14.5-2018

The authoritative national standard published by the American Society of Mechanical Engineers establishing uniform rules, symbols, definitions, and practices for dimensioning and tolerancing (GD&T).

16
New cards

Metric Dimensioning Zero Rule

A drafting convention specifying that millimeter values less than 11 must include a leading zero (e.g., 0.50.5) and must not include trailing zeros (e.g., 3535 instead of 35.0035.00).

17
New cards

Inch Dimensioning Zero Rule

A drafting convention specifying that decimal-inch values less than 11 must omit the leading zero (e.g., .500.500) and must display trailing zeros equal to the specified drawing precision.

18
New cards

Dimensioning Elements

The standard graphic components of a dimension callout, consisting of dimension lines, extension lines, leaders, arrowheads (typically 3 mm×1 mm3\,\text{mm} \times 1\,\text{mm}), and numerical dimension values.

<p>The standard graphic components of a dimension callout, consisting of dimension lines, extension lines, leaders, arrowheads (typically $$3\,\text{mm} \times 1\,\text{mm}$$), and numerical dimension values.</p>
19
New cards

Reference Dimension

A non-toleranced dimension enclosed in parentheses on a drawing, such as (55)(55), given for informational purposes only without controlling manufacturing or inspection.

20
New cards

Chain Dimensioning

A method of applying dimensions point-to-point in a continuous series across features, which causes the maximum cumulative tolerance buildup.

21
New cards

Baseline Dimensioning

A dimensioning approach where all dimensions originate from a single common baseline edge or datum, eliminating tolerance accumulation across intermediate features.

22
New cards

Direct Dimensioning

The practice of applying a single dimension directly between two critical functional points, eliminating tolerance buildup between those specific points.

23
New cards

Tolerance

The total amount a specific dimension is permitted to vary, represented mathematically as the difference between the upper limit of size and the lower limit of size.

24
New cards

Clearance

The actual space or gap between two mating assembled components, calculated as the hole size minus the shaft size.

25
New cards

Unilateral Tolerance

A tolerancing method where the allowable dimensional variation is permitted in one direction only relative to the basic size (e.g., 350+0.0535^{+0.05}_{0} or .500−.000+.005.500^{+.005}_{-.000}).

26
New cards

Bilateral Tolerance

A tolerancing method where allowable variation is permitted in both directions from the basic size, either equally (e.g., 35±0.0535 \pm 0.05) or unequally (e.g., 35−0.10+0.2535^{+0.25}_{-0.10}).

27
New cards

Allowance

The prescribed intentional difference between the maximum material limits of mating parts, representing the minimum clearance or maximum interference.

28
New cards

Maximum Material Condition (MMC)

The state of a manufactured feature when it contains the maximum amount of material within its stated limits of size (e.g., maximum shaft diameter or minimum hole diameter).

29
New cards

Least Material Condition (LMC)

The state of a manufactured feature when it contains the minimum amount of material within its stated limits of size (e.g., minimum shaft diameter or maximum hole diameter).

30
New cards

Clearance Fit

A mating condition where the limits of size always ensure clearance between assembled parts, allowing components to move, slide, or rotate freely.

31
New cards

Interference Fit

A mating condition where the shaft is always larger than the hole, creating intersecting volumes that require force or shrink assembly for permanent rigid joints.

32
New cards

Transition Fit

A fit condition with overlapping tolerance zones that may result in either a slight clearance or slight interference, used for accurate location requiring light assembly pressure.

33
New cards

Running or Sliding Clearance Fit (Class RC)

An ANSI/ASME B4.1 English fit class specified for assemblies where components must move relative to each other, such as a shaft turning within a bushing.

34
New cards

Geometric Dimensioning and Tolerancing (GD&T)

A 3-D mathematical system for explicitly defining the form, orientation, profile, runout, and location of features within unambiguous geometric tolerance zones.

35
New cards

Cylindrical Tolerance Zone

A round tolerance boundary designated by a diameter symbol (∅\varnothing) in GD&T positional tolerancing that provides 57%57\% more usable tolerance area than an equivalent square tolerance zone.

36
New cards

Datum Reference Frame (DRF)

A theoretical coordinate system of three mutually perpendicular planes established through a primary datum (3-point contact), secondary datum (2-point contact), and tertiary datum (1-point contact) to lock all degrees of freedom.

37
New cards

Feature Control Frame (FCF)

A rectangular block containing a geometric characteristic symbol, a tolerance value (with zone shape and material condition modifiers), and datum references listed in order of precedence.

<p>A rectangular block containing a geometric characteristic symbol, a tolerance value (with zone shape and material condition modifiers), and datum references listed in order of precedence.</p>
38
New cards

Flatness Tolerance

A form tolerance applied to an individual feature without datums, defining a tolerance zone bounded by two parallel planes within which the entire surface must lie.

39
New cards

Datum Simulator

A physical inspection or manufacturing surface of high precision (such as a surface plate or machine bed) that contacts a physical datum feature to establish a simulated datum plane.