1/53
Looks like no tags are added yet.
What occurs during the intake stroke of an air brake compressor piston?
the intake valve is open, allowing air to flow inside
piston is moving downwards
discharge valve is closed
What occurs during the compression stroke of an air brake compressor piston?
the intake valve is closed, no more air entering
piston is moving upwards, compressing air
discharge valve opens and releases compressed air
In the unloaded cycle of the compressor, what valves are open/closed?
The inlet valves are held open by an air pressure signal supplied by the governor.
How does the governor control maximum air system pressure?
It puts the compressor into the unloaded cycle, not allowing it to pressure up the supply reservoir anymore.
When does the automatic drain valve drain moisture/contamination from the supply reservoir?
When there is any drop in reservoir pressure (brake application/normal air system leakage)
How do desiccant type air dryers remove moisture/contamination from the system?
The desiccant materials takes the form of tiny beads that have the ability to suspend moisture and moisture vapour.
Why are single check valves installed in the inlet line to both primary and secondary service reservoirs?
The prevent air loss in the event of a failure in the other reservoir.
The function of the safety valve is?
Limit air pressure buildup in the supply reservoir (150psi max) in the event of a governor failure
The minimum pressure at which the low pressure warning devices must warn the operator is _______.
60psi
Nylon air brake tubing should not be used where it may be exposed to….
high temperatures
abrasion and wear
excessive movement
In the released position, which valves are opened/closed in the dual circuit brake valve?
Exhaust valves open, inlet valves closed
In the balanced position, which valves are opened/closed in the dual circuit brake valve?
Both inlet and exhaust valves are closed.
What is the function of the relay valve in the primary service circuit?
To speed up the application and release of the primary service brakes
In normal brake applications, how is the secondary piston of the dual circuit brake valve applied?
By primary service air pressure
What is the function of the quick release valve in the secondary circuit?
To speed up the release of the secondary service brakes
Explain how the compressor is unloaded
The governor sends a signal (air pressure to the unloader piston on the compressor) that causes it to lift upwards with the inlet valve. It holds it open, allowing air to flow freely in/out. The compressor is still running but no compression is taking place.
How can you test the compressor’s condition?
Build air time test
50-90psi
1200rpm
within 3 minutes
What are the cut out/cut in pressures?
cut out 115-135psi
cut in when system pressure falls 25psi below the cut out pressure
Where is the safety valve located?
The supply reservoir
Where are the one-way check valves located?
following the air dryer
one on each inlet line of the primary/secondary reservoirs
Define cracking pressure
The amount of air required to move the relay valve piston downwards, closing the exhaust valve, and opening the inlet valve.
Define differential pressure
The difference between the control pressure (primary service air pressure entering the relay valve) and the delivery pressure (the control pressure minus the cracking pressure - what actually gets delivered to the brake chambers)
Does the air from the dual circuit brake valve make it to the front + rear brake chambers?
To the front only. Signal air from the dual circuit brake valve controls the large movement of air from the primary service reservoir to the primary service brake chambers
What does “type” refer to when talking about a brake chamber?
The amount of area in square inches of the diaphragm that force is applied to
Define a power stroke. What is important about it?
The length of travel of the push rod when the brakes are applied. It is important that all brake chamber push rod travels are within 1/4” of each other to allow for balanced braking
How can you tell the difference between long stroke brake chambers and standard stroke brake chambers?
Long stroke - square hose ports
Standard stroke - round hose ports
List the components of the supply circuit…
compressor
moisture/contamination controls (air dryer, moisture ejectors, air brake antifreeze evaporators and injectors)
governor
reservoirs (supply, primary & secondary)
single check valves
safety valve
pressure gauges
low pressure indicators
How is an air compressor cooled?
Air - air flow through the compressor during the unloaded cycle (usually to cool block)
Coolant - through connections to the engine cooling system (usually to cool head of compressor)
List and describe the 3 ports found on the governor.
reservoir port (RES) - allows governor to sense supply reservoir pressure
unloader port (UNL) - connects governor to unloader pistons on compressor
exhaust port (EXH) - allows air from the unloader ports on the compressor to escape to the atmosphere
List the primary service circuit components.
primary reservoir
dual circuit brake valve
relay valve
service brake chambers
List the secondary service circuit components.
secondary reservoir
dual circuit brake valve
quick release valve
modulator valves
steer axle service brake chambers
How are the air reservoirs made?
Electronically welded and internally coated to prevent corrosion
How do spring brake chambers apply and release a parking brake application? How does this differ from the service brake chamber applications?
Spring brakes are spring applied and air released. Service brakes are air applied and spring released (internal return spring)
What is the purpose of the supply double check valve for the parking/emergency brakes?
Ensures the circuit will continue to have a supply of pressurized air even if one of the service circuits loses air.
It takes supply from whichever reservoir has the higher pressure.
This means that the emergency brakes will not apply if either service reservoir air pressure is lost.
Describe the function of the park control valve.
provides manual and automatic control of the parking/emergency brakes over the entire unit
Describe the function of the quick release valve in the parking/emergency brake circuit..
Allows for quick application of the spring brakes
Describe the function of the anti-compounding valve.
It stops the service brakes and parking brakes being applied at the same time by releasing the parking brakes as the service brakes are being applied.
Describe the 2 functions of the spring brake valve.
Allows for a modulated spring brake application in the event the primary service air pressure is lost
Under normal operating conditions, it will keep the spring brake chambers released
The spring brake relay valve used in parking/emergency brake circuits does what?
Speeds up the application and release of the spring brakes
Contains anti-compounding DCV
describe the purpose of the trailer supply line
To transmit air pressure to charge the trailer reservoirs
Describe the purpose of the trailer service line
To transmit air pressure to apply and release the trailer service brakes
The trailer supply valve supplies air pressure to the trailer from which tank?
Both primary and secondary reservoirs
What happens when pressure in both primary and secondary reservoirs falls below 50psi?
trailer supply valve will pop
trailer emergency brakes will apply
tractor protection valve closes off trailer service line
Describe the purpose of the trailer control valve.
Allows the operator to independently control the trailer service brakes
Describe the function of the bobtail proportioning relay and what are it’s benefits?
Reduces primary application pressure when a tractor is not towing a trailer.
This prevents the rear wheels from locking up when braking because there is a lack of weight that a trailer would normally provide
Is a brake light switch normally open or normally closed? What is it then opened/closed by?
Normally open and closed by primary or secondary service air pressure
What must be done to a spring brake chamber in order to tow a vehicle?
The spring brake chambers must be mechanically caged so that the spring is released enough to allow wheel movement.
What is the valve that controls the parking brakes on the truck and what colour is it?
Park Control Valve - yellow
What is the name of the valve that sends supply air to the trailer and what colour is it?
Trailer Supply Valve - red
Describe the purpose of the tractor protection valve
Closes the trailer service line in order to protect the tractor air supply when emergency supply pressure is lost
List the components of the parking/emergency brake circuit.
supply double check valve
park control valve
spring brake valve
anti-compounding valve
quick release valve
spring brake chambers
spring brake relay valve
List the components of the trailer brake circuit.
trailer supply valve
trailer control valve
glad hands
tractor protection valve
brake light switches
Describe the purpose of the ratio valve (instead of the quick release valve) used in the secondary circuit?
Limits steer axle application pressure to reduce the possibility of wheel lockup in slippery road conditions
How can you determine the cracking and differential pressures of a relay valve?
Check the numbers on the identification tag or washer that is attached to the valve and then refer to a parts manual