1/13
Vocabulary flashcards covering pre-drive safety checks, light and tyre inspections, fluid reservoir levels, and warning indicators.
Tell me how you would check the brakes are working before starting a journey
Test them as you set off
They should not feel spongy or slack and the car should not pull to one side
Where would you find the recommended tyre pressures and how would you check them?
In the manufacturers guide
you would use a reliable pressure gauge and check when the tires are cold
How would you make sure a head restraint is correctly adjusted?
The rigid part should at least, should be at least as high as your eyes and as close to the back of your head as comfortable
How would you check the tires, the tyres have sufficient tread and are safe?
There should be no cuts or bulges and at least 1.6 millimetres of tread.
How would you check headlights and taillights are working?
You turn them on and then walk around the car to check them
How would you know if there was a problem with the ABS?
The ABS Warning Light would Illuminate on the dashboard
How would you check that indicator's are working?
Turn them on and walk around the car to check them.
How would you check the brake lights?
Press the brake pedal and use reflections in windows or ask someone to help
How would you check the power assisted steering is working?
You should apply gentle pressure to the steering wheel while starting the engine and the wheel should move slightly
How would you switch rear fog lights on when you would use them?
You operate the the switch with dipped headlights as needed and check the warning light.
You use them when visibility is seriously reduced
How would you switch from dipped headlights to main beam and know it's on?
Operate the appropriate switch and check the main beam warning light.
How would you check that the engine has enough coolant?
You would identify the coolant reservoir and check the level that is between the high and low markings
How would you check the engine has enough oil?
Identify the oil level indicator and check the level is between the min and max marks.
How would you check the hydraulic brake fluid? Is at a safe level?
You would identify the brake fluid reservoir and check its between the high and low markings.