1/28
Vocabulary flashcards covering introductory chemistry concepts, laboratory equipment identification, Bunsen burner construction and flame zones, safe operating protocols, and GHS hazardous substance labeling.
Chemistry (Chemie)
A natural science that investigates the properties, composition, and transformation of substances.
Scope of Chemistry vs. Physics and Biology
Chemistry focuses on substance transformations (e.g., producing medicines, synthetic fibers, plastics, fuels from crude oil, and ammonia from nitrogen and hydrogen), whereas physics focuses on physical measurements (e.g., measuring lamp temperatures, energy efficiency of solar cells), and biology examines living organisms (e.g., investigating bacteria in compost or plant transpiration).
Limestone (Kalkstein) Reaction with Acid
The primary substance comprising marble; it is insoluble in water but reacts with vinegar under gas bubble formation to produce a water-soluble, salt-like residue upon evaporation.
Glow Stick (Knicklicht)
A light-producing device containing two separate liquids; bending it breaks an internal small glass vial, allowing the liquids to mix and trigger a chemiluminescent reaction.
Luminous Flame (Leuchtende Flamme)
A yellow-orange, lower-temperature flame produced when the burner's air inlet is closed; the gas burns with insufficient oxygen, leading to incomplete combustion and soot formation (Rußbildung).
Roaring Flame (Rauschende Flamme)
A hotter, non-luminous blue flame produced when the air inlet is fully opened; the gas thoroughly premixes with oxygen, resulting in complete combustion and distinct inner and outer flame cones.
Soot Test (Rußprobe)
An experimental test where a cold porcelain lid held in a yellow luminous flame gathers black soot, whereas holding it in a blue roaring flame burns the soot away, turning it white again.
Bunsen Burner Flame Zones and Temperatures
In a roaring flame with fully opened air supply: the inner cone (Innenkegel) is 450∘C, the outer cone upper zone is 1100∘C, and the hottest zone (heißeste Zone) located at the tip of the inner cone reaches 1250∘C.

Bunsen Burner Construction Components
The five essential parts of the burner: 1 = Base (Brennerfuß), 2 = Gas control valve (Gaszufuhr), 3 = Air inlet collar (Luftzufuhr), 4 = Burner barrel/tube (Brennerrohr), and 5 = Gas tubing (Gasschlauch / Gasleitung).
Burner Lighting Procedure (Vor dem Entzünden und Einstellen)
The procedure requiring the burner to be set up stably (kippsicher), gas tubing connected, gas and air controls on the burner closed, safety goggles on, long hair tied back, opening the desk gas tap, opening the burner gas valve to ignite the flame, and adjusting flame height via the gas valve and flame type via the air collar.
Burner Extinguishing Procedure (Löschen der Brennerflamme)
The safe shutdown sequence: close the air collar, close the gas valve on the burner, close the desk gas tap, and allow the remaining flame to burn off completely without blowing it out.
Mortar and Pestle (Reibschale mit Pistill / Mörser und Pistill)
A durable grinding bowl and club-shaped tool used in laboratory procedures to grind brittle solid materials (such as marble) into fine powder.
Crucible Tongs (Tiegelzange)
Scissor-like metallic grasping tools used to safely handle hot containers, evaporating dishes, or magnesia rods inside burner flames.
Ceramic Wire Gauze (Keramik-Drahtnetz)
A wire mesh screen with a ceramic center placed on a tripod (Dreifuß) to distribute burner heat evenly and protect glass vessels from thermal shock.
Volumetric Pipette vs. Graduated Pipette (Vollpipette vs. Messpipette)
A volumetric pipette features an expanded bulb designed to accurately deliver a single fixed volume of liquid, whereas a graduated pipette is marked with multiple graduations along its narrow stem to dispense variable volumes.
Test Tube Clamp (Reagenzglashalter / Reagenzglasklammer)
A spring-loaded holder used to securely hold test tubes during heating or manipulation, preventing direct skin contact with hot or hazardous glassware.
Peleus Ball (Peleusball / Pipettierhilfe)
A rubber bulb pipette filler used to safely draw and dispense liquids, eliminating the dangerous and strictly prohibited practice of mouth pipetting.
Routes of Chemical Exposure (Aufnahmewege)
The three principal routes by which hazardous substances can enter the human body: inhalation through the mouth or nose (Einatmen), swallowing/ingestion (Verschlucken), and absorption through the skin (über die Haut).
Chemical Labeling Requirements
Essential information required on reagent stock containers: Substance Name (Name des Stoffes), GHS Hazard Pictograms (Piktogramme), Signal Word (Signalwort, e.g., 'Gefahr'), H-Statements (hazard warnings), and P-Statements (precautionary advice).
GHS 01: Exploding Bomb (Explodierende Bombe)
The Globally Harmonized System hazard pictogram indicating explosive substances and self-reactive/self-igniting substances (Explosive Stoffe / Selbstentzündliche Stoffe).
GHS 02: Flame (Flamme)
The GHS hazard pictogram indicating flammable gases (entzündbare Gase) and flammable liquids (entzündbare Flüssigkeiten).
GHS 03: Flame over Circle (Flamme über einem Kreis)
The GHS hazard pictogram designating oxidizing chemicals that can cause or intensify fires (Kann Brände verstärken).
GHS 04: Gas Cylinder (Gasflasche)
The GHS hazard pictogram indicating compressed, liquefied, or dissolved gases stored under pressure (Unter Druck stehende Gase).
GHS 05: Corrosion (Ätzwirkung)
The GHS hazard pictogram indicating severe skin burns, serious eye damage (Hautätzend), and corrosiveness to metals (Metallkorrosion).
GHS 06: Skull and Crossbones (Totenkopf mit gekreuzten Knochen)
The GHS hazard pictogram designating substances with severe acute toxicity (Akute Toxizität) upon inhalation, ingestion, or skin absorption.
GHS 07: Exclamation Mark (Ausrufezeichen)
The GHS hazard pictogram warning of health hazards such as skin irritation (hautreizend), eye irritation (augenreizend), or respiratory tract irritation (Atemwege).
GHS 08: Health Hazard (Gesundheitsgefahr)
The GHS hazard pictogram identifying chronic, severe health risks such as carcinogenicity (krebserzeugend) and germ cell mutagenicity (erbgutverändernd).
GHS 09: Environment (Umwelt)
The GHS hazard pictogram designating substances that pose acute or chronic hazards to the aquatic environment (Gewässergefährdend).
Immediate Container Resealing Rule
The mandatory lab practice of closing chemical reagent bottles immediately after use to prevent toxic vapors from escaping or evaporating and to avoid accidental spill exposure.