CLRS 341 Exam III: X-Ray Production, Emission & Interactions

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/94

encourage image

There's no tags or description

Looks like no tags are added yet.

95 Terms

1
New cards

What are the two types of x-rays produced in x-ray production?

Characteristic and bremsstrahlung x-rays.

2
New cards

How do projectile electrons produce characteristic x-rays?

They hit an inner-shell electron, ionizing it, and an outer-shell electron drops in to fill the hole, releasing energy as an x-ray.

3
New cards

What is the minimum energy required for a projectile electron to produce K-characteristic x-rays in tungsten?

At least 69 keV, typically requiring 70 kVp or higher.

4
New cards

Why are K-characteristic x-rays important for imaging?

They have energies suitable for penetrating tissue, whereas L x-rays are absorbed and not useful.

5
New cards

What is bremsstrahlung x-ray production?

It occurs when a projectile electron passes close to the nucleus, slows down, and loses energy as an x-ray.

6
New cards

What is the energy range of bremsstrahlung x-rays?

They can have any energy from ~0 up to the kVp.

7
New cards

What is the x-ray emission spectrum?

A graph showing the number of x-rays emitted at each energy level, indicating that the beam is polyenergetic.

<p>A graph showing the number of x-rays emitted at each energy level, indicating that the beam is polyenergetic.</p>
8
New cards

What does the area under the x-ray emission spectrum curve represent?

The quantity (intensity) of x-rays emitted.

9
New cards

How does increasing mAs affect the x-ray emission spectrum?

It increases the amplitude (height) of the spectrum but does not shift its position.

10
New cards

What happens to the x-ray emission spectrum when kVp is increased?

The amplitude increases and the spectrum shifts to the right, indicating higher maximum energy.

11
New cards

What effect does adding filtration have on the x-ray emission spectrum?

It decreases the amplitude and shifts the spectrum to the right, removing low-energy x-rays.

12
New cards

How does increasing the target atomic number (Z) affect the x-ray emission spectrum?

It increases the amplitude and shifts the spectrum to the right, moving characteristic lines to higher energies.

13
New cards

What is kinetic energy (KE) in the context of x-ray production?

The energy of motion of electrons, calculated as KE = 1/2 mv^2.

14
New cards

What is the definition of ionization?

The removal of an orbital electron from an atom, resulting in an ion.

15
New cards

What is x-ray quality?

The penetrability of the x-ray beam, higher energy indicates higher quality.

16
New cards

What is x-ray quantity?

The number of x-rays in the useful beam, also known as intensity or exposure.

17
New cards

What is binding energy?

The strength of attachment of an electron to the nucleus, highest in the K shell.

18
New cards

What is the electric potential in an x-ray tube?

The voltage across the tube that accelerates electrons, measured in volts; kVp indicates the maximum electric potential.

19
New cards

At what kVp does bremsstrahlung x-ray production predominate?

Below 70 kVp, where 100% of the x-rays produced are bremsstrahlung.

20
New cards

What happens to the production of K-characteristic x-rays below 70 kVp?

100% bremsstrahlung is produced; no useful K-characteristic x-rays can be made.

21
New cards

What is the contribution of characteristic x-rays at 100 kVp?

At 100 kVp, characteristic x-rays contribute about 10-15% of the beam.

22
New cards

What predominates in the x-ray emission spectrum above 150 kVp?

Bremsstrahlung predominates; characteristic contribution becomes negligible.

23
New cards

What are the two types of x-ray emission spectra?

Discrete spectrum (characteristic x-rays) and continuous spectrum (bremsstrahlung x-rays).

24
New cards

How do discrete and continuous emission spectra differ in appearance?

Discrete spectra appear as vertical lines/spikes, while continuous spectra appear as a smooth curve.

25
New cards

What factors influence the x-ray emission spectrum?

Tube current (mA/mAs), tube voltage (kVp), added filtration, and target material (atomic number, Z).

<p>Tube current (mA/mAs), tube voltage (kVp), added filtration, and target material (atomic number, Z).</p>
26
New cards

Define radiation quantity in relation to x-ray intensity.

X-ray quantity is the number of x-rays in the useful beam, measured in roentgens (R/mR) or air kerma (mGya).

27
New cards

What is the formula relating mAs to x-ray intensity?

I1/I2 = mAs1/mAs2; intensity is directly proportional to mAs.

28
New cards

How does kVp affect x-ray intensity?

Intensity increases by the square of the kVp change: I1/I2 = (kVp1/kVp2)^2.

29
New cards

What is the inverse square law in relation to distance and x-ray intensity?

Intensity is inversely proportional to the square of the distance: I1/I2 = (d2/d1)^2.

30
New cards

What is the effect of filtration on x-ray quantity?

Filtration reduces quantity by removing low-energy x-rays.

31
New cards

Define x-ray quality.

X-ray quality refers to the penetrability of the x-ray beam; higher energy x-rays have higher quality.

32
New cards

What is the half-value layer (HVL)?

HVL is the thickness of absorbing material needed to reduce x-ray intensity to half of its original value.

33
New cards

How does kVp affect x-ray quality?

Higher kVp increases quality by producing higher-energy x-rays.

34
New cards

What are the three types of filtration in x-ray tubes?

Inherent filtration, added filtration, and compensating filters.

35
New cards

What is inherent filtration?

Filtration that is built into the tube, such as the glass envelope and insulating oil.

36
New cards

What is added filtration?

Sheets of aluminum placed between the tube housing and collimator to increase HVL and remove low-energy x-rays.

37
New cards

What are compensating filters used for?

Compensating filters even out the image of body parts with different thicknesses/densities.

38
New cards

What is the typical HVL for a diagnostic beam?

3-5 mm Al or about 3-6 cm of soft tissue.

39
New cards

What is the relationship between mAs and x-ray quantity?

mAs is directly proportional to the quantity of x-rays produced.

40
New cards

What happens to x-ray intensity when distance is doubled?

Intensity is reduced to one-fourth of its original value.

41
New cards

What does attenuation refer to in x-ray physics?

Attenuation is the reduction in x-ray intensity due to absorption and scattering as the beam passes through matter.

42
New cards

What is the effect of target atomic number on x-ray quantity?

Higher atomic number (Z) increases x-ray quantity.

43
New cards

What is the significance of the kVp setting in x-ray production?

kVp sets the maximum energy of the x-ray beam and affects both quantity and quality.

44
New cards

What goes under the thin end of a wedge filter in anatomy?

The thick part of the anatomy.

45
New cards

What is the relationship between x-ray quantity and absorber thickness?

The graph shows a steep drop that levels off, indicating exponential attenuation.

<p>The graph shows a steep drop that levels off, indicating exponential attenuation.</p>
46
New cards

What does a semi-log graph of x-ray exposure vs. absorber thickness represent?

Exponential attenuation of a monoenergetic beam plots as a straight line.

47
New cards

How do you find the half-value layer (HVL) from a graph?

Find 50% of the starting exposure on the y-axis, go across to the curve, then down to the x-axis.

48
New cards

What does a higher HVL indicate about an x-ray beam?

It has a curve that drops more slowly, indicating more penetrating power and higher quality.

49
New cards

What is the primary purpose of x-ray beam filtration?

To reduce patient dose by removing low-energy x-rays that do not contribute to image quality.

50
New cards

What are the two ways to shift an x-ray beam to a higher average energy?

Increase kVp or add filtration.

51
New cards

What happens during coherent scattering?

A low-energy x-ray excites the atom, releasing energy as a scattered x-ray of the same wavelength.

52
New cards

What is the Compton effect?

An x-ray ejects an outer-shell electron and continues as a scattered x-ray with less energy.

53
New cards

What occurs during the photoelectric effect?

An x-ray is totally absorbed, ejecting an inner-shell electron and emitting a characteristic x-ray.

54
New cards

What is pair production?

An x-ray near the nucleus turns into an electron and positron, which annihilate to produce two photons.

55
New cards

What is photodisintegration?

A very high-energy x-ray is absorbed by the nucleus, ejecting a nuclear fragment.

56
New cards

What is the 'sixth' interaction with matter?

No interaction at all; the x-ray is transmitted through the patient to the image receptor.

57
New cards

What is differential absorption?

The difference between x-rays absorbed photoelectrically and those transmitted through the patient.

58
New cards

How does atomic number affect differential absorption?

Photoelectric absorption is proportional to the atomic number cubed (Z^3).

59
New cards

How does mass density affect x-ray interactions?

Attenuation is directly proportional to mass density; doubling the density doubles the interactions.

60
New cards

What effect does photoelectric absorption have on image contrast?

It creates light/white, radiopaque areas where x-rays do not reach the receptor.

61
New cards

What is the effect of Compton scatter on image quality?

It causes fog and reduces contrast, creating non-diagnostic information.

62
New cards

What is the significance of the half-value layer (HVL) in x-ray imaging?

It indicates the thickness of material needed to reduce x-ray intensity by half.

63
New cards

What happens to the Compton electron after it is ejected?

It loses kinetic energy and eventually drops into a shell somewhere.

64
New cards

How does the energy of an x-ray relate to its frequency and wavelength?

Higher energy x-rays have higher frequency and shorter wavelength.

65
New cards

What is the impact of filtration on image contrast?

Filtration can slightly lower image contrast by removing low-energy x-rays.

66
New cards

What is the relationship between differential absorption and image contrast?

Greater differences in absorption between tissues lead to higher image contrast.

67
New cards

How does the binding energy of an electron affect the photoelectric effect?

Photoelectric absorption can only occur if x-ray energy is equal to or greater than the binding energy.

68
New cards

What is the effect of increasing target atomic number (Z) on x-ray energy?

It raises the average energy of the x-ray beam.

69
New cards

What happens to the interactions when the density of lung tissue is compared to muscle?

Lung is dark due to lower density while muscle appears gray, despite similar effective atomic numbers.

70
New cards

What is the effective atomic number (Z) of air?

7.6

71
New cards

What is the mass density of lung tissue?

320 kg/m^3

72
New cards

Why are contrast agents used in imaging?

They have a high atomic number, causing significant photoelectric absorption, making structures visible.

73
New cards

What is the effective Z of iodine?

53

74
New cards

What is the difference between absorption and attenuation?

Absorption is when x-rays lose all energy to tissue; attenuation is the reduction in x-ray quantity after passing through tissue.

75
New cards

Define differential absorption.

The difference between x-rays absorbed photoelectrically and those transmitted through to the image receptor.

76
New cards

What does mass density measure?

The quantity of matter per unit volume, typically in kg/m^3.

77
New cards

What is exponential attenuation?

The process where x-ray absorption and scattering reduce the beam by the same percentage for equal thickness of absorber.

78
New cards

How does Compton scattering affect image contrast?

It reduces contrast by scattering x-rays randomly, causing image fog and adding occupational exposure.

79
New cards

Is Compton scattering dependent on atomic number?

No, it is independent of Z but depends on mass density.

80
New cards

How does energy affect Compton scattering?

Compton probability decreases as x-ray energy increases.

81
New cards

Is the photoelectric effect dependent on atomic number?

Yes, it is directly proportional to Z cubed (Z^3).

82
New cards

What happens to the photoelectric effect as x-ray energy increases?

The probability decreases inversely with the cube of energy (1/E^3).

83
New cards

List the types of scattered interactions.

Coherent (classical) scattering and Compton scattering.

84
New cards

List the types of absorptive interactions.

Photoelectric effect, pair production, and photodisintegration.

85
New cards

How does kVp affect differential absorption?

Differential absorption increases as kVp decreases.

86
New cards

What happens to image contrast at low kVp?

Photoelectric effect dominates, leading to high contrast.

87
New cards

What is the typical diagnostic HVL?

3-5 mm of aluminum.

88
New cards

What does 'beam hardening' mean?

Removing low-energy x-rays to increase the average energy of the beam.

89
New cards

What is produced during positron-electron annihilation?

Two 0.511 MeV photons traveling 180° apart.

90
New cards

What is the range of bremsstrahlung energies?

From zero to maximum, which equals the kVp.

91
New cards

What is the energy needed to ionize a tungsten K-shell electron?

> 69 keV.

92
New cards

What is the energy of characteristic x-rays when an L electron fills a K hole in tungsten?

57 keV.

93
New cards

What percentage of electron energy becomes heat in x-ray production?

~99%.

94
New cards

What happens to binding energy as you move farther from the nucleus?

It weakens.

95
New cards

What is the highest chance of photoelectric absorption among fat, muscle, lung, and bone?

Bone (Z = 13.8).