1/246
Looks like no tags are added yet.
What does the notation 18:1Δ9 mean?
18 carbons, 1 C=C double bond, located between C9 and C10 (counting from the carboxyl carbon, C1). This is oleic acid.
Which fatty acid is 18:1Δ9?
Oleic acid
How is an 18-carbon fatty acid with double bonds at C9 and C12 written?
18:2(Δ9,12)
What does ":0" mean in fatty acid nomenclature?
No double bonds, i.e., the fatty acid is saturated.
How does fatty acid chain length affect melting point and water solubility?
Longer chain = higher melting point (more van der Waals contact) and lower water solubility.
Why do more cis double bonds lower a fatty acid's melting point?
Cis double bonds put kinks in the chain, so the chains pack poorly and have less van der Waals contact.
Describe the structure of a triacylglycerol (TAG).
Glycerol with three fatty acyl groups, each joined to a glycerol –OH by an ester bond. The three acyl groups can be the same or different.
What is an acyl group?
R–C(=O)–
What bond joins a fatty acid to glycerol in a TAG?
Ester bond
What is the backbone of a glycerophospholipid?
Glycerol 3-phosphate
In a glycerophospholipid, where are the fatty acyl tails and how is the head group attached?
Tails are in ester linkage at C1 and C2 of glycerol. The head group (X) attaches to the phosphate at C3 through a phosphodiester bond.
What is the net charge of a phospholipid whose head group is just H, and why?
About -1.5, because of partial negative charges on the oxygens of the phosphate.
Name the three operational classes of membrane proteins and how each is removed from the membrane.
Integral: only by disrupting the bilayer with detergent. Peripheral: milder treatments such as high salt or high pH. Amphitropic: reversible association, set by regulation (e.g., phosphorylation).
Why is detergent required to purify an integral membrane protein?
Detergent breaks the bilayer and solubilizes the protein, which is embedded in the hydrophobic core.
Which moves faster in a bilayer: lateral diffusion or flip-flop of lipids?
Lateral diffusion is fast. Flip-flop is slow unless catalyzed by translocators.
What does a typical transmembrane segment look like?
An α-helix of about 20 mostly hydrophobic residues, long enough to span the ~30 Å hydrophobic core.
What is a common motif of membrane receptors regarding TM helices?
Seven transmembrane helices (heptahelical).
Why do hydropathy plots miss β-barrel membrane proteins?
In β barrels, alternating residues face the lipid (and the other side), so there is no long stretch of consecutive hydrophobic residues.
How else can proteins be anchored to a membrane besides TM domains?
By covalently attached lipids.
Why does a transmembrane protein have a fixed orientation?
The "inside" and "outside" ends of the protein are set, so it doesn't flip across the membrane.
Write the equation for the free energy of transporting a solute across a membrane.
ΔG = RT ln(C_to/C_from) + ZFΔψ
In ΔG = RT ln(C_to/C_from) + ZFΔψ, what is Δψ and how is it signed for moving in vs. out?
Δψ = potential where the solute ends up minus potential where it starts. With outside = 0 and inside ≈ -50 mV: moving in, Δψ = -0.050 V. Moving out, Δψ = +0.050 V.
Why does the electrical term drop out for glucose transport?
Glucose is uncharged (Z = 0).
What value of F is used in transport/redox calculations?
96.5 kJ V⁻¹ mol⁻¹
State the "rule of six."
A 10-fold change in a concentration ratio is worth about 6 kJ/mol (RT ln 10 = 5.9 kJ/mol at 37 °C; 5.7 at 25 °C).
List the four types of membrane transport.
Simple diffusion; facilitated diffusion (transporter or channel, down gradient); primary active transport (ATP); secondary active transport (driven by an ion gradient).
Symporter vs. antiporter?
Symporter moves solute in the same direction as the ion. Antiporter moves it in the opposite direction.
Worked example: [Na⁺]in = 12 mM, [Na⁺]out = 145 mM, Δψ = -50 mV, 37 °C. What is ΔG for moving one Na⁺ in?
RT ln(12/145) + (1)(96.5)(-0.050) = -6.4 - 4.8 ≈ -11.2 kJ/mol
For the Na⁺-glucose symporter (2 Na⁺ per glucose), how much can the Na⁺ gradient concentrate glucose, and what is the logic?
About 6000-fold (5.9 × 10³). Two Na⁺ give ΔG ≈ -22.4 kJ/mol. At maximum gradient total ΔG = 0, so RT ln([glc]in/[glc]out) = +22.4 kJ/mol, giving e^(22.4/2.58) ≈ 5.9 × 10³.
Is GLUT1 active or passive transport? What does it do?
Passive uniport (facilitated diffusion) in erythrocytes. Glucose moves only down its gradient with no energy input.
Why does glucose need a transporter to cross the bilayer?
Crossing unaided requires shedding its hydration shell, a large activation barrier. The transporter replaces those interactions and lowers ΔG‡.
Does a transporter like GLUT1 change ΔG of transport?
No. It lowers the activation barrier (ΔG‡) but ΔG is unchanged.
Write the kinetic equation for GLUT1 and define the terms.
V0 = Vmax[S]out/(Kt + [S]out). [S]out = extracellular glucose. Kt (transport constant) plays the role of Km.
On a double-reciprocal plot (1/V0 vs 1/[S]out) for a transporter, what are the intercepts?
y-intercept = 1/Vmax. x-intercept = -1/Kt.
How does the intestinal Na⁺-glucose symporter differ from GLUT1?
It is secondary active transport that moves glucose uphill, driven by the Na⁺ gradient (2 Na⁺ per glucose). GLUT1 is passive.
What is the stoichiometry of the Na⁺K⁺ ATPase?
3 Na⁺ out and 2 K⁺ in per ATP hydrolyzed (antiport, against both gradients).
Why is the Na⁺K⁺ ATPase electrogenic?
Net +1 charge leaves the cell per cycle, which builds the membrane potential (inside ≈ -50 mV).
What fraction of resting energy use goes to the Na⁺K⁺ ATPase?
About 25%
Give the two main roles of the Na⁺K⁺ ATPase.
(1) Builds the membrane potential (inside negative). (2) Builds the Na⁺ gradient that powers other transport, e.g., Na⁺-glucose symport.
State the paradox of the K⁺ channel.
K⁺ is selected over Na⁺ by ~10⁴ (implying strong binding), yet up to 10⁸ ions/s pass, near the diffusion limit.
Describe the KcsA K⁺ channel structure.
4 subunits. Lower 2/3: broad (22 Å) water-filled tunnel with hydrophobic walls. Top 1/3: selectivity filter, ~3 Å wide, lined by backbone C=O oxygens, with four K⁺ sites (two occupied at any instant).
How does the K⁺ channel resolve the selectivity/speed paradox?
The filter's C=O oxygens mimic K⁺'s hydration shell, so K⁺ sheds its waters at no energetic cost and doesn't bind too tightly, so it passes quickly.
Why is Na⁺ excluded from the K⁺ channel?
Na⁺ (0.95 Å vs. K⁺ 1.33 Å) holds its waters closer. The carbonyl oxygens are too far apart to replace its hydration shell, so it's too small to pass.
Name the three principles of biochemical signaling.
Specificity, amplification, and termination/desensitization.
What is specificity in signaling? Give an example.
A signal molecule fits the binding site of its complementary receptor, and other signals don't. Example: epinephrine and its analogs bind the β-adrenergic receptor with different Kd values.
How does amplification occur in the β-adrenergic pathway?
Enzymes activate enzymes, so numbers grow geometrically: one receptor → many Gs → many cAMP → many active PKA. (MAP kinase cascades add a tier at each kinase.)
Name three ways signaling is terminated.
G proteins' intrinsic GTPase turns them off. cAMP phosphodiesterase degrades cAMP to AMP. Receptor feedback shuts off or removes the receptor from the surface (desensitization).
What reaction does PKA activation represent?
R2C2 (inactive) + 4 cAMP → R2(cAMP)4 (regulatory dimer) + 2 C (active catalytic subunits).
How is PKA activated: by phosphorylation or cAMP binding?
cAMP binding, not phosphorylation.
What does adenylyl cyclase do?
Makes the second messenger cAMP from ATP.
PKA phosphorylates which residues, and name two substrates.
Ser/Thr residues. Substrates include phosphorylase kinase (glycogen breakdown) and PFK-2/FBPase-2 in liver.
How does PKA signaling stop (negative feedback)?
cAMP phosphodiesterase lowers [cAMP], so R rebinds C and inhibits it.
What is PKA's overall regulatory direction?
Toward sugar creation: glycogen breakdown and gluconeogenesis.
Order the events of the β-adrenergic pathway.
Epinephrine binds receptor → GDP replaced by GTP on Gsα → Gsα separates from Gsβγ and activates adenylyl cyclase → cAMP made → PKA activated → phosphorylation of cellular proteins. cAMP is degraded by phosphodiesterase to 5'-AMP.
What is isoproterenol vs. a β-blocker?
Isoproterenol is an agonist that binds the β-adrenergic receptor more tightly. β-blockers are antagonists.
Name the two off switches of the β-adrenergic pathway.
Gsα's intrinsic GTPase and cAMP phosphodiesterase.
G protein: is it active bound to GDP or GTP? Why?
GTP. The γ-phosphate holds the two switch regions in the conformation that binds and activates effectors. GDP-bound = relaxed/inactive.
What does a GEF do?
Guanine nucleotide exchange factor: speeds GDP release so GTP (more abundant) loads, which activates the G protein.
What does a GAP do?
GTPase-activating protein: speeds GTP hydrolysis to GDP + Pi, which inactivates the G protein.
List the order of insulin signaling through the MAP kinase cascade.
Insulin receptor → IRS-1 → Grb2·Sos → Ras (GDP → GTP) → Raf-1 (MAPKKK) → MEK (MAPKK) → ERK (MAPK) → nucleus/transcription factors (e.g., Elk1) → genes.
What type of receptor is the insulin receptor, and how does it differ from the β-adrenergic receptor?
A receptor tyrosine kinase (autophosphorylates Tyr), not a GPCR/heptahelical receptor.
Which GEF activates Ras in insulin signaling?
Sos (docked via Grb2 on phosphorylated IRS-1).
Which MAP kinase tier is Raf-1, MEK, and ERK?
Raf-1 = MAPKKK, MEK = MAPKK, ERK = MAPK.
What residues does MEK phosphorylate on ERK, and Raf-1 on MEK?
Raf-1 phosphorylates two Ser residues on MEK. MEK phosphorylates a Thr and a Tyr on ERK.
Why do three kinase tiers matter?
They amplify the signal (principle 2).
List the six metabolic principles.
Explain "constant totals, variable ratios" with the muscle example.
Muscle ATP+ADP+AMP stays at 5.6 mM at rest and in exercise, but the ATP:AMP ratio falls from 50 to 8.
Explain fuel sparing with an example.
Using one fuel to conserve another, e.g., ketone bodies spare glucose in starvation (which spares muscle protein that would otherwise be broken down to make glucose).
Name the seven bloodborne fuels.
Glucose, fatty acids, ketone bodies, glycerol, amino acids (especially Ala and Gln), lactate and pyruvate, ethanol (if consumed).
What is the minimum blood glucose level and why does it matter?
~3.5 mM. The brain absolutely requires glucose, and glycogen is only a ~12 h supply.
What happens to brain fuel after 2-3 days of fasting?
The brain uses ketone bodies (made by the liver from fatty acids), sparing glucose and therefore muscle protein.
What happens to ketone bodies, fatty acids, and glucose in starvation?
Ketone bodies and fatty acids rise while glucose holds steady.
How does the fed state affect metabolism 2-4 h after eating?
Anabolic (refill TAG and glycogen), then catabolic.
List five common biological nucleophiles.
Hydroxide (H–O⁻), unprotonated –OH/–COOH (–O⁻), unprotonated –SH (Cys, –S⁻), carbanion (–C⁻), uncharged amine (–NH2, Lys), uncharged imidazole (His).
List four common biological electrophiles.
H⁺ (proton), carbonyl carbon (C=O), carbon of a protonated imine (Schiff base), phosphorus of a phosphate.
Why does charge state matter for Lys and His as nucleophiles?
They are nucleophiles only when unprotonated.
Outline reversible Schiff base formation.
Amine + aldehyde/ketone ⇌ carbinolamine ⇌ protonated Schiff base (iminium, –N⁺H=C–) + H2O ⇌ Schiff base (imine). The amine N (nucleophile) attacks the carbonyl C (electrophile), water is lost, and every step is reversible.
Why is a protonated Schiff base useful in enzymes?
The protonated imine carbon is a strong electrophile and an electron sink. Reversibility lets the enzyme release product by hydrolysis.
Which enzymes in this course use a Lys Schiff base?
Human (class I) aldolase (with F1,6BP) and transaldolase in the PPP.
Why is C–C bond formation/breakage central to metabolism?
Glucose → 6 CO2 necessarily breaks 5 C–C bonds, and gluconeogenesis requires making them.
Describe the aldol addition mechanism.
The attack target is a carbonyl carbon. The attacking group is a double-bonded (enol/enolate) carbon that becomes nucleophilic by deprotonation (acid/base catalyzed).
What is the rule of thumb for which C–C bond breaks in the retro-aldol direction?
The bond that breaks is next to (or one removed from) a carbonyl, which can hold the electrons.
What is a group transfer reaction?
Y: + A–X → Y–A + X:. An electrophilic group A moves from one nucleophile to another, a nucleophilic substitution.
Describe acyl group transfer.
R–C(=O)–X + Y⁻ ⇌ R–C(=O)–Y + X⁻. Y attacks the carbonyl carbon, forming a tetrahedral intermediate, then X leaves (e.g., acetyl from acetyl-CoA).
Give examples of phosphoryl group transfer.
ATP + H2O → ADP + Pi (water is the nucleophile). Kinases: ATP + protein → ADP + protein-P. Glycolysis: hexokinase, PFK-1, PGK, pyruvate kinase.
What does "high-energy" mean for ATP, PEP, 1,3-BPG, and acetyl-CoA?
Their hydrolysis is highly exergonic, yet uncatalyzed hydrolysis is slow, so they persist until an enzyme couples them to another reaction.
Rank by ΔG′° of hydrolysis (most to least negative): ATP, PEP, acetyl-CoA, 1,3-BPG.
PEP (-61.9) > 1,3-BPG (-49.3) > acetyl-CoA (-31.4) > ATP (-30.5 kJ/mol).
Why is PEP's hydrolysis so exergonic?
Pi is resonance-stabilized, and the key: the product pyruvate (not PEP) can tautomerize from the enol to the far more stable keto form.
Why is 1,3-BPG a high-energy compound?
It is an acyl phosphate (mixed anhydride) with a phosphoryl transfer potential higher than ATP's, and its carboxylate product is resonance-stabilized.
Why is acetyl-CoA high-energy?
It is a thioester. Thioesters are much less resonance-stabilized than oxygen esters, while the product acetate is stabilized, so hydrolysis is more negative than for an ester.
Give three reasons ATP hydrolysis is highly exergonic.
(1) Relieves charge repulsion. (2) Pi is resonance-stabilized. (3) Products are better solvated than the phosphoanhydride (and ADP³⁻ ionizes, releasing H⁺).
Write the relationship between ΔG and ΔG′°.
ΔG = ΔG′° + RT ln Q
Define ΔG′° and ΔG.
ΔG′° is fixed for a reaction at standard conditions (1 M each, pH 7, 55.5 M H2O, 1 mM Mg²⁺ for ATP). ΔG is what happens at actual cellular concentrations and its sign decides direction.
What is Q at equilibrium?
Q = K′eq and ΔG = 0.
Calculate ΔG for ATP hydrolysis in an erythrocyte: [ATP] 2.25 mM, [ADP] 0.25 mM, [Pi] 1.65 mM, 37 °C.
Q = 1.8 × 10⁻⁴, log Q ≈ -3.7, RT ln Q ≈ -22 kJ/mol, so ΔG = -30.5 + (-22) ≈ -52 kJ/mol.
Why is ATP hydrolysis more exergonic in cells than ΔG′° suggests?
[ATP] is kept high relative to [ADP] (and Pi), so Q is small and RT ln Q is strongly negative.
How are ΔG′° values of coupled reactions combined?
They add.
What are the redox equations for free energy?
ΔG′° = -nFΔE′° and ΔG = -nFΔE.
How do you calculate ΔE′° for a redox reaction?
ΔE′° = E′°(electron acceptor) - E′°(electron donor). A positive ΔE′° gives a negative ΔG′° (favorable).
Nernst-type equation for a half-reaction under non-standard conditions?
E = E′° + (RT/nF) ln([acceptor]/[donor])