1/42
Looks like no tags are added yet.
what is the cytoskeleton?
Cytoskeleton: network of structural proteins
Exists in cytosol
Enables signalling and vesicle transport, shape, distribution of cell contents, motility
Can identify its filaments when stained and imaged
what are classes of proteins for cytoskeleton?
The differing distribution of these proteins relates to function
1. Intermediate filaments = add mechanical strength
2. Microtubules= support trafficking
3. Actin = support cellular motility or large scale movements like contraction
These proteins also function similarly to other proteins
Binding: cytoskeletal proteins bind to a target to form polymers
Conformation: cytoskeletal proteins undergo conformational changes when bind
Function: fx of cytoskeletal proteins is defined by # and type of cytoskeletal proteins bound
what are intermediate filaments?
They are similar to the bones of body (filaments supply strength to cells to resist shape changes)
Are the strongest cytoskeletal filaments
Are tissue/cell specific
Are polymers
assembly/disassembly is controlled by post translational modification of proteins
what are the major classes of intermediate filaments?
Class | Protein | Distribution | Proposed function |
I | Acidic keratins | Epithelial cells | Tissue strength, integrity |
II | Basic keratins | “ “ | “ “ |
III | Desmin, GFAP, vimentin, perphevin | Muscle, glial cells, mesenchymal cells, perphevin neurons | Sarcomere organization, integrity |
IV | Neurofilaments | Neurons | Axon organization |
V | Lamins | Nucleus | Nuclear structure and organization |
VI | Nestin | Neurons | Axon growth |
*class I and II keratins most commonly found in humans
describe the beginning stages of intermediate filament assembly
Strength of intermediate filaments comes from how individual proteins are packaged/assembled into polymers
They don’t gain properties until assembled
At primary structure: intermediate filaments have same strength as any other protein
At secondary structure: intermediate filaments are rich in alpha helices (helps the long coiled structure) + H-bonds stabilize structure to resist stretching and collapse
At tertiary structure: the coiled monomer
Dimer: 2 monomers wrapping around each other to form a “coiled coil”
Allows for maximum contact (H-bonds) between peptides to give a lot of strength
Is quaternary structure
Tetramer: 2 dimers assemble in antiparallel manner, staggered
H-bonding and thus strength increases
This is the fundamental building block of intermediate filaments

describe assembly of intermediate filaments
The tetramers (building blocks) come together spontaneously in 3 stages to form filaments:
Stage 1: formation of a unit-length filament (8 tetramers coming together)
Stage 2: unit-length filaments come together to form an immature filament (interacts loosely end to end)
Stage 3: immature filament compacts to form a mature filament. This forms a fully assembled intermediate filament
*nonpolar, the antiparallel tetramer cancels out direction

describe post-translational modifications of intermediate filaments
Examples: phosphorylation, glycosylation → typically occur in head/tail domains of the intermediate filament subunit proteins
Unclear understanding of consequences of modification
Typically, phosphorylation breaks apart an intermediate filament into unit-length filaments. When phosphates are removed (by phosphatases), intermediate filaments will spontaneously reform
disassembly/assembly is important for cell division, as cytoskeleton collapses prior to it and then reforms after
describe 3 types of specialized intermediate filaments
Lamins | Desmins | Keratins |
Found in nucleus
| Doesn’t form long/thin filaments but connects different cellular structures together For muscle structure | Binds to desmosomes to form a complex Makes skin, nails |
Purpose of microtubules?
Main purpose: cellular trafficking (movement of organelles, proteins, etc)
These movements are not random, but directed by the microtubule network
what is MTOC
Microtubule-organizing center
Microtubule assembly is much more organized compared to intermediate filaments
Needs many proteins, assembly occurs in MTOCs (microtubule-organizing centers)
MTOCs:
Cellular structures which form microtubules
Can be at different locations to dictate where microtubules should be assembled
Example: centrosome (near nucleus)
This is copied during cell division so 2 centrosomes form mitotic spindle poles

what is the protein strucutre of microtubules
Are made of tubulin proteins
Composed of dimerized proteins
A large family of cellular proteins
Ɑ-tubulin and β-tubulin are both globular proteins
Can bind tightly in head-to-tail to form a dimer
Both tubulins bind to GTP
Β-tubulin binds to GTP and cleave it to form GDP
Β-tubulin has a shape change when bound to GDP

describe microtubule polymerization/assembly
If polymer from tubulin dimers reach a critical length, it continues growing
Steps of microtubule assembly:
1. Dimers spontaneously assemble into unstable polymers (fall apart quickly)
2. Once a polymer is 6+ dimer subunits, its more stable, and can grow laterally and longitudinally (protofilament)
3. Protofilaments form a sheet (tube of 13 protofilaments)
This is the nucleation site for microtubule elongation
In this form, microtubule is in a state of assembly and disassembly
4. assembly/disassembly
Dimers come and go at the ends of microtubule
If assembly rate > disassembly, microtubules grows (vice versa)

describe behaviours of microtubule assembly/disassembly
Assembly | Disassembly |
Ɑ-tubulin is always bound to GTP Β-tubulin might have GTP or GDP
| When Β-tubulin’s GTP is hydrolysed to GDP, the dimer undergoes a conformational change
|
what is a key characteristic of microtubules?
Polarity |
Since microtubules are made by end-end dimer polymerization, both ends differ in polarity
|
what is microtubule dynamic instability?
Cells can change shape and move things around
Microtubules must be very responsive and grow+shrink or change direction quickly
Dynamic instability = ability to rapidly grow or shrink
2 reasons:
Cells can explore cytosol and rapidly create new trafficking pathways
Cells can exert force (molecules attached to + end of microtubule is transported throughout cell as it grows/shrinks)
a) GTP cap:
A growing microtubule has GTP subunit cap at tip
b) GTP hydrolysis sometimes exposes GDP-bound subunits at tip
c) After hydrolysis, quick catastrophic depolymerization occurs
d) When enough GTP subunits bind to recap microtubule, this stops depolymerization
e) Microtubule continues growing when GTP-bound dimers are available until another change in environment is detected
When does microtubule continue growing?
As long as there exists GTP-bound tubulin dimers
what is a catastrophe?
When GTP→GDP on one end, the tubulin dimers rapidly fall off
= initiates a catastrophe (rapid depolymerization of tubulin dimers at plus end, shortening the microtubule)
how to prevent catastrophe?
Catastrophes are not permanent
1. Aversion:
Once microtubule is proper length, plus end can be bound by “microtubule capping proteins” that add stability and keeps it polymerized even if dimers are in GDP-bound form
2. Rescue:
Can occur spontaneously if enough GTP-bound dimers exist
Can also occur in presence of other proteins
what are MAPs
MAPs = microtubule associated proteins
Can help stability, cross linking, cutting, etc
Important example: microtubule-based motor proteins
These actually control trafficking
Binds to cargo, then microtubule, then walks along it
What are the 2 most common motor proteins?
Kinesin
Move along microtubule towards + end
Dynein
Move along microtubule to - end
Both heads have microtubule-binding domains, and their tails bind to the cargo
Has 2 heads that walk along microtubule (need ATP)
Describe 5 steps of motor proteins walking
5 steps
1. Head 1 binds to microtubule, head 2 binds to ADP
2. ATP binds to head 1 (enables it to walk), causing a conformational change so head 2 swings around
3. Once head 2 meets a binding site, it binds to microtubule and releases ADP
4. ATP at head1 undergoes hydrolysis (now ADP is bound), causing it to release from microtubule
5. Entire process is repeated but now ATP binds to head 2, so head 1 swings around
Describe actin filaments
Similarities to microtubules
Both composed of globular proteins
Both use motor proteins for movement along it
Differences to microtubules: the types of networks they form
Microtubules use a dynamic network
Actin forms a stronger network contributing to the structure of cell and large scale movements (muscle contraction)
Actin cytoskeleton can move the cell
What is the basic building block for actin?
The basic building block = monomeric actin protein/monomer
Cells have different types of actin monomers
Structure:
Similar to double coil (can bind longitudinally and laterally)
Combination of bonding means it has high tensile strength (that would normally pull microtubules apart)
Polarized
Actin filaments are polarized
+ end = barbed end (due to association with other proteins like myosin)
- end = pointed end

describe actin polymerization
Similar to microtubules, actin monomers bind to nucleotide phosphates
However, actin monomers bind to ATP/ADP
Binding of ATP = promotes assembly/polymerization
Binding of ADP = discourages polymerization, may lead to disassembly
There’s a preference for ATP = so if there’s a constant source of ATP, this replaces ADP
Stages:
a) nucleation
2 actin monomers can dimerize, but adding a 3rd one forms a nucleus trimer
Trimer forms the core of the actin filament
Same purpose as a MTOC, though simpler
b) elongation
More actin monomers are added to nucleus
Actin filament elongates (in both directions, starting at nucleus)
Like microtubules, polymerization is favoured at + end
Can be dynamic with actin monomers being added and removed
If adding > removing, filament elongates
c) steady state
Eventually, rate of assembly = rate of disassembly, so net elongation stops

describe actin treadmilling
Since actin filaments polymerize from a trimer nucleus, the +/- ends are exposed
Since - end exposed = dynamic adding/removing of monomers occurs
Called treadmilling = the favoured addition of monomers to one end with the same rate of monomer removal at the other end
Actin filament remains the same net length but the filament can move around cell
Regulated by ATP-actin concentration compared to ADP-bound actin
Critical concentration of ATP-actin to polymerize is lower at + than -
If ATP-actin concentration is correct, monomers are added ot + end, and removed from minus end to cause treadmilling
If ATP-actin concentration increases above critical concentration for minus end, actin monomers are added to that end
Cell can rapidly adjust actin cytoskeleton, much faster than intermediate filaments (need phosphorylation)
what are actin binding proteins?
Actin can also be modified by phosphorylation, etc
Proteins can also bind to actin to change structure and fx
Overall: proteins regulate disassembly
Binding protein | Function |
Monomer-binding proteins | Bind directly to actin monomers to influence polymerization |
Nucleating proteins | Bind to actin polymers to increase stability, allows for growth of a new branch |
Capping proteins | Bind to + or - end and can stabilize polymer to prevent disassembly/assembly |
Severing and depolymerization proteins | Bind to actin polymer to sever/induce disassembly |
Cross linking proteins | Enable side-side linkage of actin polymers to form bundles of actin filaments |
Membrane anchors | Links actin filaments to nonactin structural proteins |
Actin-binding motor proteins | Binds to actin filament and allows movement
|
Compare and contrast intermediate filaments/microtubules/actin
Intermediate filaments | Microtubules | Actin | |
Similarities | Has tissue and cell specific expression, polymers | Has tissue and cell specific expression, polymers Polar (+/-), work with motor proteins | Has tissue and cell specific expression, polymers Polar (+/-), work with motor proteins |
Fx | Provides structural integrity, resistant to shape changes | Provides trafficking network/cargo travel routes Can exert force for movement within cell | Enables large scale whole cell movement |
Structural units | All monomers made of alpha helices | a/b tubulin | Monomers Filaments with 2 types of bonding in a double coil |
Assembly | Monomers, dimers, tetramers Unit length, immature, mature filaments | Polymer joining, tube structure, assembly/disassembly Binds to GTP/GDP | Polymerizes in 3 stages: nucleation, elongation, steady state +/- end Binds ATP/ADP |
Binding interactions | keratins/desmins/lamins/nestin/neurofilaments | MAPs (motor proteins dynein and kinesin) | Monomer binding proteins/nucleating proteins/capping proteins/severing and depolymerization proteins/cross linking proteins/motor proteins (myosins) |
Stability | Phosphorylation, glycosylation | Dynamic instability | Treadmilling |
generally explain cell movement
Usually, cell movement involves physical deformation of cells/movement of cargo inside cells
Some cell types actually move around: migration
Needs a lot of coordination, not random
Involves cytoskeleton
Rapid assembly/disassembly of proteins to generate force/coordination for cell migration
Describe cell migration and actin filaments
Actin filaments+proteins generate internal pushing/pulling forces
Cell migration is initiated when actin filaments polymerize near plasma membrane and push it outwards
This doesn’t break the membrane because hydrophobic interactions between membrane phospholipids hold it together
what are 3 types of actin filaments for cell migration?
Filopodia | Lamellipodia | Stress fibres |
Thin, parallel bundles of filaments
| Larger, sheet like bundles of actin filaments
Form broader structures
As filopodia/lamellipodia extend, P.M-bound integrins bind to ECM
| Forms around integrins Similar to filopodia, but different polarity
|
describe 2 parts of cell cycle
Interphase
G1, S, G2
Most of cell life is in G1
Cells are not dividing
Mitosis
Cells are dividing
Initiates division by certain signals
what are checkpoints?
Checkpoints
Lots of energy is invested in cell division
It's also very risky
Cells have switches/checkpoints to control these points of transition between phases to avoid unnecessary energy waste
Functional unit of checkpoints: cyclins and CDKs
Cyclins: proteins associated with progression of cell cycle
CDKs bind to cyclins to become activated
Then, they phosphorylate other proteins to trigger next stage of cell cycle
describe the 4 checkpoints
Mitotic spindle checkpoint = ensures all chromosomes are properly separated (prevent chromosome imbalance)
So cytokinesis occurs after mitosis is done
G1/S checkpoint = cell proteins check for DNA damage before cell goes to S phase
Start point
Commits cell to progression throughout cycle
S/G2 checkpoint: DNA integrity is checked before G2
G2/M checkpoint = triggers large-scale rearrangement to cell structure, facilitates mitosis. Increase in cell volume before causes progression through this stage
describe parts in cell cycle including checkpoints
M = mitosis
Mitotic spindle checkpoint = ensures all chromosomes are properly separated (prevent chromosome imbalance)
So cytokinesis occurs after mitosis is done
G1 = no dividing cells, active and growing. Need a checkpoint to start division
G0 = technically not part of cycle. Occurs when cells are not dividing (“resting”). Oftentimes, nerve and muscle cells are here
G1/S checkpoint = cell proteins check for DNA damage before cell goes to S phase
Start point
Commits cell to progression throughout cycle
S phase = cell replicates entire genome, duplicates centrosome
S/G2 checkpoint: DNA integrity is checked before G2
G2 = last chance for cell growth before division. Total cytoplasm and cellular contents increase in preparation for division
G2/M checkpoint = triggers large-scale rearrangement to cell structure, facilitates mitosis. Increase in cell volume before causes progression through this stage

describe cell cycle and cancer
p53 protein
A tumour suppressor
Ensures cells with damaged DNA don’t divide
Can initiate apoptosis in cells with damaged DNA
If it's dysfunctional, cells can evade apoptosis and divide uncontrollably
Over 50% of tumours have a mutation in this
Part of the G1/S checkpoint
describe phases in mitosis
Many drastic changes: stop protein synthesis, reorganization of endomembrane system, etc
Risky since errors can lead to defective cells
describe interphase
a) interphase
Not a stage in mitosis but before it
DNA replication occurs here
describe prophase
First stage of mitosis
a) condensation Chromosomes are condensed and packed into chromatids (1 of 2 identical copies of DNA, making a duplicated chromosome, joined at centromere)
Kinetochore is located near centromere and is where spindles attach
Gene transcription shuts down
Endomembrane system dissolves into vesicles
Only mito is intact
Vesicles + mito are randomly distributed so each daughter cell has organelles
b) after condensation
Nuclear envelope dissolves
Chromosomes are released into cytosol
Microtubule reorganizes to form mitotic spindle, which forms around each of 2 centrosomes (for microtubule organization, has 2 centrioles)
Centrioles + proteins form centrosomes (MTOCs)
Centrosomes are moved to opposite ends of cell by tubulin and motor proteins
describe prometaphase
Kinetochore forms
A protein complex binding to chromatids on either side of centromere
Each pair of sister chromatids has 2 kinetochores
Are molecular motors
Uses ATP to poly/depolymerize microtubule spindle fibres, allowing chromosomes to move within cell
Eventually, chromosomes move to center of cell to prepare for metaphase
describe metaphase
Chromosomes have arrived at spindle equator
Chromosomes have attached to kinetochore microtubules, pulling equally in both directions
There is a mitotic spindle checkpoint
Ensures chromosomes are properly aligned
describe anaphase
Proteins that bind sister chromatids are cleaved, dividing each chromosome into 2 identical daughter chromosomes
Kinetochore microtubules are shortened to move chromosomes apart
In late anaphase, chromosomes reach maximum condensation level (prepare for final steps)
Additional microtubules begin organizing around spindle equator (prepare for development of contractile ring in cytokinesis)
describe telophase
Final step
Reorganization of cell
Rearrangements that occurred in prophase are reversed
Nuclear membrane reforms around chromosomes
Interphase cytoskeleton begins reforming (also endomembrane system)
describe cytokinesis
Final stage in cell division (not mitosis)
In mammals = contractile ring forms
It tightens
As it closes, PM will snap
However, the PM’s hydrophobic nature causes it to reseal spontaneously
2 new cells enter interphase, reform cell junctions, etc