1/30
Looks like no tags are added yet.
flat sketches
used to communicte all the details of a style
include all lines, seams, and details necessary
drawn on croquis
does not inclue hands, head, legs, etc.
fashion sketched
more artistic/stylized
include hands, head, neck, etc.
croquis
used so sketches are in the correct proportion
fitting elements
darts, gathers, pleats, tucks, princess seams, etc.
MUST BE INCLUDED
darts (tops)
point torward bust or apex
should not be drawn all the way to the bust point
should taper
thinner than boundary line (.75 or .5 in illustrator)
darts (bottoms)
should be drawn at a slight angle out
shorter than pleats
thinner than boundary line (.75 or .5 in illustrator)
pleats
drawn with two lines
taper
.75 or .5
princess seam
should start at either center shoulder or 2/3s of the way down of armhole
goes through bust point
goes all the way to waist, hip, or hem
.75 or .5
gather lines
should vary in length and shape
curved
hook on some ends/beginnings
should look realistic
tapered
.75 or .5
top stitching & under stitching
dashed lines
length of dash should be 2x the size of skipped area
parallel or evenly spaced from original seam
.75 or .5
facings & understitching
If garment has understitching, the sketch needs both the facing line and under stitching line. garments have facing when there is no binding or collar (with some exceptions ofc)
facing line is solid
understitching line is dashed
.75 or .5
curved lines
should be curved and smooth
include necessary lines
pants and shorts must include a center back and center front
skirts can include CF/CB, but dont have to
zipper seam included if garment has a lapped, invisible, centered, or fly front zipper (not required for exposed zipper)
boundary lines
1
internal lines
.75 or .5
corners
should be sharp without rounding if at hem
armhole shape
J curve
waistband
front should have slight concave; the two lines should be parallel
back should be included; straight line; darker color
hem
should have slight concave
don’t include dashed line on nicer garments that are sewn with blind hemmer
jeans hem width
around 3/8'“
skirt or pants hem width
wider; up to 1”
dahsed lines on sleeve hems
1/2-3/4” from folded edge
womens garments closure
right over left (other than jeans
mens garments closure
left over right
button & button hole
placed on CF
drawn in closed (buttoned) position
womens buttonholes are seen on left side
draw correct type
include placket; buttonholes may have to be vertical to fit in placker
zippers
include zipper pulls (especially on invisible zippers)
exposed zippers should include teeth
fly front zippers
seam parallel to cf
7” long
place on correct side based on gender (exception of jeans
dashed lines
collars/neck
connect at the bottom or below ____
back neck should concave slightly, shaded darker, horizontal line to show shape
but be drawn correctly according to type
pant/crotch area
drawn with decorative z (centered)
horizontal line on back
side seam
straight from underarm to almost waist
smooth curve at waist
pockets for waist, hip, and back
rotated at angle