Chemistry: Matter, Mixtures, Separation Techniques, Atomic Structure, and the Periodic Table

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/52

flashcard set

Earn XP

Description and Tags

Comprehensive practice flashcards covering states of matter, kinetic particle theory, diffusion, osmosis, separation techniques, periodic trends, atomic structure, isotopes, and radioactivity.

53 Terms

1
New cards

How is a pure substance defined in chemistry?

A pure substance consists of only a single element or a single compound (for example, pure water contains only water particles, or a balloon filled exclusively with helium particles).

2
New cards

What does the term "potable" mean?

Potable means safe to drink.

3
New cards

What two experimental methods can be conducted to verify whether a substance is pure?

  1. Determination of melting point, boiling point, or freezing point.
  2. Chromatography (a pure substance yields only one spot when analysed).
4
New cards

How do impurities affect the melting point of a solid and the boiling point of a liquid?

Impurities added to a solid cause a decrease in the melting point value (e.g., adding salt to ice drops the temperature below 0∘C0^\circ\text{C}), whereas impurities added to a liquid cause an increase in the boiling point value.

5
New cards

What is the difference between an element and a compound?

An element consists of only one type/kind of atom (e.g., an iron pipe containing only Fe\text{Fe} atoms, or O2\text{O}_2 gas). A compound consists of two or more elements chemically combined in fixed proportions (e.g., ethanoic acid, CH3COOH\text{CH}_3\text{COOH}, which contains C\text{C}, H\text{H}, and O\text{O} atoms).

6
New cards

Why is it incorrect to refer to substances such as NaCl\text{NaCl} as "molecules"?

Substances like NaCl\text{NaCl} possess an giant ionic structure rather than molecular structure.

7
New cards

What distinguishes a mixture from a compound?

A mixture is a combination of two or more substances that are not chemically bonded to each other, with no chemical reaction occurring between them.

8
New cards

What are the two major classes of mixtures based on uniformity of composition?

Homogeneous mixtures (uniform composition throughout, generally classed as solutions) and heterogeneous mixtures (non-uniform composition, classed as colloids and suspensions).

9
New cards

What are two examples of solid-in-solid solutions (alloys)?

Brass (zinc solute dissolved in copper solvent) and bronze (tin solute dissolved in copper solvent).

10
New cards

What role do the solute and solvent play in a solution?

The solute is the substance that dissolves, while the solvent is the substance that the solute dissolves in, forming the bulk of the solution.

11
New cards

What are the six main factors affecting the solubility of a solute in a solvent?

  1. Nature of the solvent and solute ("like dissolves like").
  2. Temperature of the solution (for solid solutes).
  3. Surface area of the solute in contact with solvent (for solid solutes).
  4. Agitation/stirring/shaking (for solid and liquid solutes).
  5. Temperature (for gaseous solutes).
  6. Pressure (for gaseous solutes).
12
New cards

How does temperature affect the solubility of solid solutes versus gaseous solutes?

For most solids, solubility increases with increasing temperature due to increased kinetic energy. For gaseous solutes, solubility decreases with increasing temperature and increases with decreasing temperature.

13
New cards

How does pressure affect the solubility of a gas in a liquid?

An increase in gas pressure increases its solubility by causing more collisions between gaseous solute particles and the solvent (e.g., carbonated beverages packaged under high pressure).

14
New cards

What is the difference between a dilute, concentrated, saturated, and unsaturated solution?

  • Dilute: small amount of solute in a large amount of solvent.
  • Concentrated: large amount of solute in a small amount of solvent.
  • Saturated: contains the maximum amount of dissolved solute at a particular temperature in the presence of undissolved solute.
  • Unsaturated: a solution in which more solute can be dissolved.
15
New cards

How do particle sizes compare among solutions, colloids, and suspensions?

  • Solution: 0.1−2 nm0.1 - 2\,\text{nm}
  • Colloid: 2−1000 nm2 - 1000\,\text{nm}
  • Suspension: ≥1000 nm\ge 1000\,\text{nm} (where 1 nm=10−9 m1\,\text{nm} = 10^{-9}\,\text{m}).
16
New cards

How do solutions, colloids, and suspensions compare regarding particle settling and filtration?

  • Solutions: do not settle; particles pass through filter paper.
  • Colloids: do not settle; particles pass through filter paper.
  • Suspensions: particles settle out on standing; particles do not pass through filter paper (retained as residue).
17
New cards

What optical and dynamic properties differentiate solutions, suspensions, and colloids?

  • Solutions are transparent and exhibit Brownian motion.
  • Colloids are opaque and exhibit Brownian motion.
  • Suspensions are translucent and do not exhibit Brownian motion.
18
New cards

What mixture separation technique is used to separate an insoluble solid from a liquid or solution?

Filtration, where the insoluble solid remains on the filter paper as residue and the liquid passing through is collected as the filtrate.

19
New cards

How is evaporation defined, and what type of mixture does it separate?

Evaporation is the gradual change of state from liquid to gas occurring at the liquid's surface; it is used to separate soluble solids from a solution (e.g., obtaining salt from seawater in salt pans).

20
New cards

When using a separating funnel to separate two immiscible liquids like oil and water, which liquid forms the bottom layer and why?

Water collects as the bottom layer because it is the denser (heavier) liquid, while oil forms the top layer because it is less dense.

21
New cards

What two conditions make simple distillation appropriate for separating mixtures?

Simple distillation is used to separate a solid dissolved in a liquid (collecting both components) or to separate two liquids with large boiling point differences.

22
New cards

In a simple distillation apparatus, what is the role of boiling stones (anti-bumping granules), and what materials are they made of?

They ensure smooth boiling; they can be made of porcelain, calcium carbonate (CaCO3\text{CaCO}_3), or aluminium oxide (Al2O3\text{Al}_2\text{O}_3).

23
New cards

Why is the thermometer bulb placed just below the condenser sidearm in a distillation apparatus?

To accurately register the temperature of the entering vapour before it condenses.

24
New cards

Why must cooling water enter the bottom of a condenser and exit at the top during distillation?

Water enters at the bottom so that it fills the jacket completely and flows against gravity, ensuring efficient and complete cooling of the vapour.

25
New cards
<p>What apparatus is shown in the diagram, and what is the specific role of the column packed with glass beads?</p>

What apparatus is shown in the diagram, and what is the specific role of the column packed with glass beads?

Fractional distillation apparatus; the fractionating column is packed with glass beads to provide a large surface area for repetitive condensation and vaporization of vapours.

26
New cards

When a mixture of ethanol (boiling point 78∘C78^\circ\text{C}) and water (boiling point 100∘C100^\circ\text{C}) is separated by fractional distillation, which fraction distills over first?

Ethanol distills and condenses first because it has the lower boiling point (78∘C78^\circ\text{C}).

27
New cards

When is crystallization used instead of simple evaporation to recover a solute?

Crystallization is used when separating soluble solids that tend to decompose upon heating (thermal degradation) from their solution (e.g., sucrose from sugar beets or pharmaceutical purification).

28
New cards

What is capillary action in paper chromatography?

Capillary action (capillarity) is the ability of a liquid (mobile phase) to flow against gravity in a narrow space, such as through the pores of chromatography paper.

29
New cards
<p>In the paper chromatography experiment shown, why does the blue spot travel further up the paper than the yellow spot?</p>

In the paper chromatography experiment shown, why does the blue spot travel further up the paper than the yellow spot?

The blue pigment is more soluble in the mobile phase (distilled water) and less attracted to the stationary phase (chromatography paper) than the yellow pigment.

30
New cards

What is the formula for calculating the retention factor (RfR_f) in chromatography?

Rf=distance travelled by spot or componentdistance travelled by solvent (solvent front)R_f = \frac{\text{distance travelled by spot or component}}{\text{distance travelled by solvent (solvent front)}}

31
New cards

What is sublimation, and which substances exhibit this property?

Sublimation is the direct conversion of a solid to a gas upon heating without passing through a liquid phase. Examples include naphthalene (in moth/camphor balls), ammonium chloride (NH4Cl\text{NH}_4\text{Cl}), dry ice (solid CO2\text{CO}_2), and solid iodine.

32
New cards

How can a mixture of solid ammonium chloride and sodium chloride be separated?

By heating the mixture under an inverted funnel: ammonium chloride sublimes into a vapour, rises, and solidifies on the cool upper walls of the funnel, leaving sodium chloride in the evaporating dish.

33
New cards

Which common metals are attracted to a magnet and can be separated magnetically?

Iron, nickel, cobalt, and steel.

34
New cards

How do particle arrangement, movement, and compressibility compare between solids and gases?

  • Solids: particles tightly packed in a regular fixed pattern, vibrate about fixed positions, almost incompressible.
  • Gases: particles very far apart, move freely in all directions at great speeds, highly compressible.
35
New cards

What are the changes of state corresponding to: gas to solid, and solid to gas?

Gas to solid is deposition (rejects heat energy); solid to gas is sublimation (absorbs heat energy).

36
New cards

What four experimental phenomena provide evidence supporting the Particulate Theory of Matter?

  1. Diffusion through a liquid
  2. Diffusion through a gas
  3. Osmosis
  4. Brownian motion
37
New cards
<p>In the gas diffusion experiment shown, why does the solid white ring of $$\text{NH}_4\text{Cl}$$ form closer to the concentrated $$\text{HCl}$$ end?</p>

In the gas diffusion experiment shown, why does the solid white ring of NH4Cl\text{NH}_4\text{Cl} form closer to the concentrated HCl\text{HCl} end?

Hydrochloric acid (HCl\text{HCl}) particles are heavier than ammonia (NH3\text{NH}_3) particles, meaning the lighter NH3\text{NH}_3 gas diffuses faster down the tube than HCl\text{HCl}.

38
New cards

What is osmosis?

Osmosis is the net movement of water particles from an area of high water concentration to an area of low water concentration across a semi-permeable membrane.

39
New cards

What happens to green paw-paw strips placed in distilled water versus a concentrated salt solution for 2 hours2\,\text{hours}?

  • Distilled water: strips become rigid, increasing in length and mass as water enters via osmosis.
  • Salt solution: strips become soft and wilted, decreasing in length and mass as water leaves via osmosis.
40
New cards

What causes the erratic motion observed in Brownian motion experiments (such as pollen grains in water or smoke in air)?

Continuous, uneven collisions/bombardments of visible suspended particles by smaller, invisible particles of the surrounding fluid medium (water or air).

41
New cards

Why does the temperature remain constant on a heating curve during melting and boiling?

Heat energy absorbed during phase changes is used to overcome intermolecular forces of attraction rather than raising the kinetic energy of the particles.

42
New cards

What are the relative masses, relative charges, and locations of protons, neutrons, and electrons?

  • Proton (p\text{p}): relative mass 11, relative charge +1+1, found in the nucleus.
  • Neutron (n\text{n}): relative mass 11, relative charge 00, found in the nucleus.
  • Electron (e−\text{e}^-): relative mass 1/18401/1840, relative charge −1-1, found orbiting the nucleus.
43
New cards

How are the Group number and Period number of an element deduced from its electronic configuration?

  • Group number = number of valence (outermost shell) electrons.
  • Period number = total number of occupied electron shells.
44
New cards

Which elements are classified as semi-metals or metalloids on the Periodic Table?

Boron (B\text{B}), silicon (Si\text{Si}), germanium (Ge\text{Ge}), arsenic (As\text{As}), tellurium (Te\text{Te}), polonium (Po\text{Po}), and astatine (At\text{At}).

45
New cards

What is tensile strength, and which metal exemplifies high tensile strength?

Tensile strength is the maximum amount of stress a substance can handle before collapsing, breaking, or failing; tungsten (W\text{W}) has an exceptionally high tensile strength value.

46
New cards

Why does atomic radius decrease across a period from left to right?

Moving across a period, atomic number increases (adding protons) which increases positive nuclear charge, while electrons enter the same valence shell; this pulls the valence electrons closer to the nucleus.

47
New cards

What is the screening or shielding effect, and how does it influence atomic size down a group?

It is the repulsive force exerted by inner shell electrons on valence electrons, reducing nuclear attraction and allowing valence electrons to move further outward, which increases atomic radius down a group.

48
New cards

What is electronegativity, and how does it trend across a period and down a group?

Electronegativity is the measure of an atom's ability to attract electrons to itself during chemical bonding. It increases across a period (greater nuclear pull) and decreases down a group (increased atomic size and shielding).

49
New cards

What is ionisation energy, and what chemical equation represents the first ionisation energy of sodium?

Ionisation energy is the energy needed to remove one mole of electrons from a neutral gaseous atom to form one mole of a gaseous unipositive ion: Na(g)−e−→Na(g)+\text{Na}_{(g)} - e^- \rightarrow \text{Na}^+_{(g)}

50
New cards

What are isotopes, and how many neutrons are present in 1123Na^{23}_{11}\text{Na} versus 1124Na^{24}_{11}\text{Na}?

Isotopes are atoms of the same element with identical atomic/proton numbers but different mass/nucleon numbers due to different neutron numbers. 1123Na^{23}_{11}\text{Na} has 23−11=12 neutrons23 - 11 = 12\,\text{neutrons}, while 1124Na^{24}_{11}\text{Na} has 24−11=13 neutrons24 - 11 = 13\,\text{neutrons}.

51
New cards

What is radioactivity?

The spontaneous disintegration of unstable atomic nuclei by emission of radiation through alpha, beta, or gamma decay.

52
New cards

What are the industrial applications of Americium-241, Sodium-24, and Californium-252?

  • Americium-241: maintains uniform thickness when rolling steel and paper; determines location of oil wells.
  • Sodium-24: oil well studies and locating pipeline leaks.
  • Californium-252: determines moisture content of soil in road construction and building industries.
53
New cards

What are the industrial applications of Iridium-192 and Uranium-235?

  • Iridium-192: tests the integrity of boilers and aircraft parts.
  • Uranium-235: fuel for nuclear power plants and naval propulsion systems; production of fluorescent glassware and colored wall tiles.