1/7
Looks like no tags are added yet.
BULLET
Usually made of lead covered with a copper jacket. Only component that leaves the barrel and strike the target.
CASE
A brass, steel, or copper cylinder closed at one end. It holds the other components together
POWDER
Burns creating expanding gasses that pushes the bullet down the barrel towards the target.
PRIMER
A small metal cup containing an explosive compound.
CARTRIDGE FIRING SEQUENCE.
Trigger squeeze causes the firing pin to strike the primer.
>Primer expands sending a flash into the case.
>Flash ignites the powder.
>Powder burn, creating pressure behind the bullet.
>Pressure pushes the bullet down the barrel and out towards the target.
CARTRIDGE IDENTIFICATION
the head stamp
Hollow points
explode on impact
FIRING SEQUENCE WHEN THERE'S NO POWDER IN CASE.
>Pull trigger.
>Firing pin strikes primer.
>Primer ignites.
>No powder to ignite.
>No pressure builds up behind the bullet.
>Bullet may lodge in barrel ("squib load").
>Stop shooting immediately.
>Perform immediate action drill.