1/79
Looks like no tags are added yet.
What is the fundamental difference between voltage and current in an electric circuit?
Voltage is the "pressure" that moves electrons between two points, while current is the actual flow rate of electrons through a conductor in response to that voltage.
What is the water hose analogy for voltage and current?
Voltage is analogous to water pressure, and current is analogous to the water flow rate.
Formal definition of Voltage (V)
Voltage is the energy required to move a unit electric charge between two points in a circuit (V = W/Q).
Standard SI unit of measurement for voltage
Volt (V), which is equivalent to Joules per Coulomb (J/C).
Formula to calculate voltage given energy (W) and charge (Q)
V = W / Q
Formula to calculate required energy (W) given charge (Q) and voltage (V)
W = Q * V
Formula to calculate charge (Q) given energy (W) and voltage (V)
Q = W / V
Number of electrons equivalent to 1 Coulomb (1 C) of charge
6.242 x 10^18 electrons.
Energy required to move 1 C of charge between terminals of a 12 V battery
12 Joules (W = Q * V = 1 * 12 = 12 J).
Calculate voltage if it takes 60 J of energy to move 20 C of charge
V = 60 / 20 = 3 V.
Definition of voltage polarity (v_ab)
v_ab represents the potential difference between point a and point b: v_ab = v_a - v_b.
Interpretation of v_ab = 9 V regarding point a relative to point b
Point a is at a potential 9 V higher than point b (or potential at a with respect to b is 9 V).
Mathematical relationship when reversing voltage polarity subscripts (v_ab vs v_ba)
v_ab = -v_ba (e.g., if v_ab = 9 V, then v_ba = -9 V).
How is voltage established physically in a circuit?
Voltage is established by the separation of positive and negative charges.
Is voltage measured at a single point or between two points?
Voltage always exists between two points (it is a relative potential difference).
Definition of Electric Current (I)
Electric current is the time rate of flow of electric charges through a conductor (I = Q/t).
Standard SI unit of measurement for current
Ampere (A), equivalent to Coulombs per second (C/s).
Formula to calculate current (I) given charge (Q) and time (t)
I = Q / t
Formula to calculate charge (Q) given current (I) and time (t)
Q = I * t
Number of electrons passing a point per second for a 1 A current
6.242 x 10^18 electrons per second.
Number of electrons passing a point per second for a 2 A current
12.484 x 10^18 electrons per second.
Calculate current if 0.16 C of charge flows in 0.064 s
I = 0.16 / 0.064 = 2.5 A.
Definition of Direct Current (DC)
Direct current is a current that remains constant in magnitude and direction with time.
Definition of Alternating Current (AC)
Alternating current is a current that varies sinusoidally with time.
Direction of conventional current flow
Conventional current flows out of the positive (+) terminal of a voltage source and into the negative (-) terminal.
Direction of physical electron flow relative to conventional current direction
Physical electron flow is opposite to conventional current (from negative terminal to positive terminal).
Equivalence between +5 A flowing upward and a downward directional reference
-5 A flowing downward.
What does a negative current value (e.g., I = -3 A) indicate?
It indicates that the actual current flows in the direction opposite to the chosen reference arrow.
Calculate charge passing through a circuit when 4 mA flows for 5.5 minutes (330 s)
Q = I * t = (0.004 A) * (330 s) = 1.32 C.
Why do electrical engineers use conventional current flow instead of electron flow?
For historical continuity and mathematical simplicity, as positive charge flow in one direction is mathematically equivalent to negative charge flow in the opposite direction.
Definition of Electric Power (P)
Power is the time rate of absorbing or supplying energy (P = dw/dt).
Standard SI unit of measurement for electric power
Watt (W), equivalent to Joules per second (J/s).
How many Watts are in 1 horsepower (1 hp)?
1 hp = 746 Watts.
Primary formula relating Power (P), Voltage (V), and Current (I)
P = V * I
Power formulas in terms of Resistance (R) using Ohm's law
P = I^2 * R and P = V^2 / R
Formula for magnitude of power delivered or absorbed by a battery with electromotive force E
P = E * I
Definition of Electric Energy (W)
Energy is the capacity to do work, measured in Joules (J) or Watt-hours (Wh).
Conversion factor between 1 Watt-hour (1 Wh) and Joules (J)
1 Wh = 3,600 Joules.
Energy consumed by a 100 W light bulb operating for 2 hours in kilojoules
720 kJ (720,000 J or 200 Wh).
Passive Sign Convention condition for Power Absorption
Current enters the positive (+) terminal of the voltage polarity (p = +vi).
What does a positive power value (p = +vi > 0) signify for a circuit element?
The element is absorbing energy (acting as a passive LOAD).
Passive Sign Convention condition for Power Generation/Supply
Current enters the negative (-) terminal of the voltage polarity (p = -vi).
What does a negative power value (p = -vi < 0) signify for a circuit element?
The element is supplying energy to the circuit (acting as an active SOURCE).
Law of Conservation of Energy in an electric circuit
The total power absorbed by all elements in a circuit must equal the total power supplied by all sources (sum P = 0).
Calculate power absorbed by a resistor with 4 V across it and 3 A entering the positive terminal
p = +vi = 4 * 3 = +12 W (absorbing 12 W).
Two main categories of circuit elements
Passive elements and Active elements.
Definition of Passive Elements
Elements that cannot generate energy; they only absorb, dissipate, or store energy.
Three fundamental passive circuit elements
Resistor, Inductor, and Capacitor.
How does a Resistor handle electrical energy?
It limits current and dissipates energy as heat.
How does an Inductor store energy?
It stores energy in its magnetic field.
How does a Capacitor store energy?
It stores energy in its electric field.
Definition of Active Elements
Elements capable of generating, supplying, or amplifying electrical energy.
Four examples of active circuit elements
Voltage sources (batteries), Current sources, Generators, Operational Amplifiers (Op-Amps).
Definition of Primary Batteries
Non-rechargeable batteries (e.g., Alkaline, Lithium primary, Zinc-carbon).
Definition of Secondary Batteries
Rechargeable batteries (e.g., Lead-acid, NiMH, Lithium-ion).
Standard nominal voltage of an Alkaline cell
1.5 V.
Nominal voltage and feature of Lithium-ion (Li-ion) batteries
3.7 V nominal, lightweight with high energy density.
Nominal voltage of Nickel-Metal Hydride (NiMH) battery
1.2 V.
Two broad classifications of electrical sources
Direct Current (DC) sources and Alternating Current (AC) sources.
Definition of an Ideal Independent DC Voltage Source
An active element that provides a specified voltage completely independent of the current flowing through it.
Definition of an Ideal Independent DC Current Source
An active element that provides a specified current completely independent of the voltage across its terminals.
Geometric symbol used to represent Dependent (Controlled) Sources
A diamond-shaped symbol.
Definition of a Dependent (Controlled) Source
An active element whose source quantity (voltage or current) is controlled by another voltage or current elsewhere in the circuit.
What does VCVS stand for?
Voltage-Controlled Voltage Source.
What does CCVS stand for?
Current-Controlled Voltage Source.
What does VCCS stand for?
Voltage-Controlled Current Source.
What does CCCS stand for?
Current-Controlled Current Source.
Example of a dependent source equation: v_s = 10 * i_x
This is a Current-Controlled Voltage Source (CCVS), where the output voltage depends on controlling current i_x.
Definition of Resistance (R)
The opposing force to charge flow caused by electron collisions within a material, converting electrical energy into heat.
Four physical factors determining the resistance of a uniform conductor
Formula for Resistance (R) at room temperature (20°C)
R = rho * (L / A) in ohms.
Definition of Conductance (G) and its SI unit
Conductance is the reciprocal of resistance (G = 1/R), measuring how well a material conducts electricity. Unit: Siemens (S).
Formula for Conductance (G) in terms of physical dimensions
G = A / (rho * L) in Siemens (S).
Calculate resistance of a 100 m copper wire (2.5 mm^2 area, rho = 1.72 x 10^-8 ohm*m)
R = 1.72 x 10^-8 * (100 / (2.5 x 10^-6)) = 0.688 ohms (688 m-ohms).
Examples of Fixed vs Variable Resistors
Fixed: Carbon composition, Metal film, Wire wound. Variable: Potentiometer, Rheostat, Trimmer.
Calculate voltage between two points if 3.4 J is required to move 12 uC
V = W / Q = 3.4 / (12 x 10^-6) = 283.33 kV.
Calculate energy expended to move 8 mC across a potential difference of 60 V
W = Q * V = (8 x 10^-3 C) * 60 V = 0.48 J (480 mJ).
Calculate current if 96 mC of charge passes through a wire in 8.4 seconds
I = Q / t = (96 x 10^-3) / 8.4 = 11.43 mA.
Definition and formula for Ampere-Hour (Ah) rating of a battery
Ah rating represents capacity: Capacity (Ah) = I * t (current in Amperes x time in hours).
What current can a battery with an 180 Ah rating theoretically provide for 40 hours?
I = Ah / t = 180 Ah / 40 h = 4.5 Amperes.