1/176
Comprehensive practice flashcards for PLTW Medical Interventions Activity 1.4.2: Vaccine Development, covering vaccine basics, routes of administration, vaccine types, herd immunity, recombinant DNA technology, and restriction enzymes.
What is the full title of Activity 1.4.2 in the PLTW Medical Interventions curriculum?
Activity 1.4.2 Vaccine Development.
What is the title of Lesson 2 of 4 in Activity 1.4.2?
Part I: Vaccine Basics.
What is the title of Lesson 3 of 4 in Activity 1.4.2?
Part II: Recombinant DNA Technology.
What are the two primary learning goals of Activity 1.4.2?
To research and compare the methods used to develop vaccines, and to simulate the production of a vaccine through recombinant DNA technology.
What four materials are required for the recombinant DNA simulation in Activity 1.4.2?
Paper plasmid DNA, scissors, clear tape, and colored pencils.
Which two student resources are listed under Resources for Activity 1.4.2?
Activity 1.4.2 Student Resource Sheet and Activity 1.4.2 Vaccine Development (Downloadable PDF).
According to the Introduction, what historical impact has vaccination had on medicine?
It was one of the farthest-reaching medical discoveries of all time, dramatically decreasing the impact of infectious diseases once considered deadly.
What is the fundamental goal common to all vaccine development methods?
Creating a weakened version of the antigen to kick-start the immune system.
What three major concerns must scientists balance when developing a vaccine?
Safety of the vaccine, ease of the delivery system, and its overall effectiveness over time.
What toxicity criterion must an effective vaccine satisfy?
It must have low levels of side effects or toxicity.
Against what form of the pathogen must an effective vaccine protect?
Natural, or wild forms of the pathogen.
Which two branches of the adaptive immune response should an effective vaccine stimulate?
Both an antibody (B-cell) response and a cell-mediated (T-cell) response.
What type of immune response is mediated by B-cells?
An antibody response.
What type of immune response is mediated by T-cells?
A cell-mediated response.
What long-term immunological characteristic must an effective vaccine produce?
Long-term, lasting effects that produce immunological memory.
What is the booster dosage ideal for an effective vaccine?
It should not require numerous doses or boosters.
What practical and economic criteria must an effective vaccine meet?
It should be inexpensive, have a long shelf life, and be easy to administer.
By what primary route are the majority of vaccines administered?
By injection.
What are the three injection routes listed for vaccine administration?
Subcutaneous, intramuscular, and intradermal.
Into which anatomical layer is a subcutaneous vaccine injected?
The subcutaneous tissue layer beneath the skin.
Into which anatomical tissue is an intramuscular vaccine injected?
Deep muscle tissue.
Into which anatomical layer is an intradermal vaccine injected?
The dermis layer of the skin.
How prevalent are oral vaccines compared to injectable vaccines?
Oral vaccines are available for only a few diseases.
Why do killed whole-cell or inactivated viral vaccines still elicit an immune response?
Even though they are harmless, they still contain recognizable antigens on their surface.
Why do killed or inactivated vaccines require larger doses and more boosters?
Because the microbe does not multiply within the host.
What are live, attenuated vaccines?
Vaccines that use live, weakened cells or viruses.
What is a major advantage of live, attenuated vaccines regarding dosage?
They are longer-lasting and require fewer boosters.
What is the primary risk associated with live, attenuated vaccines?
The disease agent could mutate back to a pathogenic strain.
What is a toxoid vaccine?
A vaccine in which a purified toxin produced by the antigen is used to elicit an immune response.
How are genetically engineered microbial antigen vaccines produced?
Genes for microbial antigens are inserted into a plasmid vector and cloned in appropriate hosts, and the resultant protein product is used to provoke the immune system.
What specific product of genetically engineered microbes provokes the immune system?
The resultant protein product expressed by the host.
What do DNA vaccines contain, and how do they function?
They contain all or part of the pathogen DNA, which is used to 'infect' a recipient's cells so that the host cells express the antigen.
How does increasing the number of immune individuals affect disease occurrence in a population?
It decreases the incidence of the disease and the occurrence of the pathogen.
Why does a high immunization rate lower risk for unimmunized individuals?
With greater numbers immunized, it is less likely that an unimmunized person will encounter the pathogen.
What is 'herd immunity' according to Activity 1.4.2?
Indirect protection conferred by mass vaccination for those individuals who do not receive the vaccine.
Which external interactive activity is assigned in Step 3 of Part I?
The NOVA Making Vaccines site.
How many different vaccine production methods are explored on the NOVA site?
6 different methods.
What rule is given in Step 3 for summarizing the development steps of each vaccine type?
The steps must be summarized in no more than four steps.
What two elements must be included for each vaccine method reviewed from the NOVA activity?
The steps involved in the development of the vaccine and an example of a vaccine produced by each method.
What question about live vaccines is asked in the Laboratory Notebook section of Part I?
'Which types of vaccines described on the website are examples of live vaccines? Explain your reasoning.'
What question about community protection is asked in the Laboratory Notebook section of Part I?
'How does vaccination contribute to the development of herd immunity in a community?'
What prior drawing are students instructed to review in Step 4 before starting Part II?
The drawing of a bacterial cell created in Lesson 1.2.
What prompt compares bacterial and eukaryotic genetic storage in the Step 5 Laboratory Notebook?
'What are the similarities and differences between the organization and structure of DNA in bacterial cells and in human cells?'
What prompt regarding biotechnology tools is asked in the Step 5 Laboratory Notebook?
'Why do you think plasmids and bacterial cells are such important tools in genetic engineering?'
How is chromosomal DNA structured in a bacterial cell versus a human cell?
Bacteria have a single, circular chromosome not bound by a nucleus, whereas humans have multiple linear chromosomes enclosed in a membrane-bound nucleus.
What are plasmids in bacteria?
Rings of DNA separate from the main chromosome that carry additional genes.
What role do plasmids serve in genetic engineering?
They serve as vectors, which are vehicles for the movement of genetic information.
What is recombinant DNA technology?
The process of cutting and recombining DNA fragments.
Why is it possible to combine DNA fragments from two different species?
Because DNA is composed of the same universal nucleotides in all species.
What is the biological definition of a gene as stated in the text?
A segment of DNA that codes for the production of a protein.
How do bacterial cells function as 'factories' for producing proteins in biotechnology?
Plasmids containing foreign genes are inserted into bacteria; as the cells replicate, the plasmid is copied, and the target protein is transcribed and translated.
What video is watched in Step 6 of Activity 1.4.2?
The Recombinant DNA video.
Which two molecular biology tools are referred to as 'scissors' and 'glue'?
Restriction enzymes are the scissors, and DNA ligase is the glue.
What prompt regarding molecular tools is presented in the Step 6 Laboratory Notebook?
'Describe how the two tools of molecular biology—often described as scissors and glue—are used in conjunction with plasmids to make copies of a gene of interest.'

In this diagram of recombinant DNA formation, which label represents the action of DNA ligase sealing gaps?
Label E.
In the Step 7 Check for Understanding diagram, what does label A designate?
Sticky ends.
In the Step 7 Check for Understanding diagram, what does label B represent?
The restriction sites / cut sites on the foreign DNA.
In the Step 7 Check for Understanding diagram, what does label C designate?
The gene of interest.
In the Step 7 Check for Understanding diagram, what does label D designate?
The plasmid cut by a restriction enzyme.
Which specific virus vaccine is simulated in Activity 1.4.2?
Hepatitis B.
What viral gene is transferred into the bacterial plasmid to engineer the hepatitis B vaccine?
The gene for a viral envelope protein.
Where does the hepatitis B envelope protein reside, and what are its natural functions?
It resides on the surface of the virus and assists with identity and infection.
What must occur before bacterial-produced hepatitis B viral proteins can be used as a vaccine?
The protein must be purified.
What is a restriction enzyme?
An enzyme that recognizes a specific nucleotide sequence and makes a distinct cut in the DNA.
What are the two terms used for the specific nucleotide sequence recognized by a restriction enzyme?
Restriction sequence or restriction site.
What is the recognition sequence of the restriction enzyme BamHI?
5′ GGATCC 3′ (paired with 3′ CCTAGG 5′).
Where does the restriction enzyme BamHI cut its recognition sequence?
Between the first G and the second G: 5′ —G | GATCC— 3′ and 3′ —CCTAG | G— 5′.
What type of ends does BamHI cleavage produce?
Sticky ends.
What is the recognition sequence of the restriction enzyme EcoRI?
5′ GAATTC 3′ (paired with 3′ CTTAAG 5′).
Where does the restriction enzyme EcoRI cleave its recognition sequence?
Between G and A: 5′ —G | AATTC— 3′ and 3′ —CTTAA | G— 5′.
What type of ends does EcoRI produce?
Sticky ends.
What is the recognition sequence of the restriction enzyme HaeIII?
5′ GGCC 3′ (paired with 3′ CCGG 5′).
Where does the restriction enzyme HaeIII cleave its recognition site?
Between the two G's and two C's: 5′ —GG | CC— 3′ and 3′ —CC | GG— 5′.
What type of DNA ends does HaeIII cleavage produce?
Blunt ends.
What is the recognition sequence of the restriction enzyme HindIII?
5′ AAGCTT 3′ (paired with 3′ TTCGAA 5′).
Where does the restriction enzyme HindIII cut its recognition sequence?
Between the two A's: 5′ —A | AGCTT— 3′ and 3′ —TTCGA | A— 5′.
What type of ends does HindIII generate?
Sticky ends.
What is the recognition sequence of the restriction enzyme PstI?
5′ CTGCAG 3′ (paired with 3′ GACGTC 5′).
Where does the restriction enzyme PstI cleave its recognition sequence?
Between A and G: 5′ —CTGCA | G— 3′ and 3′ —G | ACGTC— 5′.
What type of ends does PstI produce upon cutting?
Sticky ends.
What five common restriction enzymes are detailed in the Activity 1.4.2 reference table?
BamHI, EcoRI, HaeIII, HindIII, and PstI.
What is the first step when preparing to cut the paper plasmid in Step 12?
Scan the plasmid DNA, locate the restriction sites for each enzyme, identify which enzyme targets each site, and create a color key in the lab notebook.
What task is assigned in Step 13 regarding viral DNA?
Scan the viral DNA, locate restriction sites for each enzyme, and shade each restriction site with the designated color key.
Why should an enzyme that digests the plasmid into many tiny pieces NOT be selected?
Because the plasmid ring must be opened cleanly at a single site to insert the foreign gene without destroying the plasmid architecture.
Why is an enzyme that produces sticky ends preferred over one that produces blunt ends?
Sticky ends have complementary single-stranded overhangs that anneal specifically and efficiently.
What is the maximum number of base pairs that can be cleaved off either side of the viral DNA during excision?
No more than 20 base pairs.
Why must no more than twenty base pairs be removed from either side of the viral gene?
The remaining base pairs are required for the production of the protein of interest, and vital promoters at the beginning are required to transcribe the gene.
What critical regulatory region at the start of a gene sequence is vital for transcription?
Promoters.
What is the origin of replication (ori) in a plasmid?
The DNA sequence that initiates replication of the plasmid.
Why must the chosen restriction enzyme NOT cleave the origin of replication (ori)?
If the origin of replication is cut, the plasmid cannot replicate inside the host bacterial cell.
Why must the chosen restriction enzyme NOT interrupt the antibiotic resistance gene?
The antibiotic resistance gene is required as a selection marker to determine whether bacteria took up the engineered plasmid.
How do scientists verify that bacteria successfully took up an engineered plasmid?
They culture the bacteria on medium containing an antibiotic; only cells containing the intact resistance gene on the plasmid will grow.
What must be presented to the teacher in Step 15 before constructing the recombinant plasmid?
A plan defending the choice of restriction enzyme using evidence from the DNA sequences.
What hands-on actions are taken in Step 16 to build the recombinant plasmid?
Using scissors and tape to cut and assemble the plasmid and insert according to the enzyme cut patterns.
What gene transfer method, discussed in Lesson 1.2, is typically used to introduce a recombinant plasmid into bacteria?
Transformation.
What is Conclusion Question 1 in Activity 1.4.2?
'Explain why a plasmid and a segment of DNA to be inserted into a plasmid must be cut with the same restriction enzyme. Use the term sticky ends in your response.'
Why must both the plasmid and the foreign DNA insert be cut with the exact same restriction enzyme?
To ensure they produce matching, complementary sticky ends that can anneal together via base pairing.
What is Conclusion Question 2 in Activity 1.4.2?
'Explain why HaeIII is unlikely to be used to create recombinant DNA. How does this enzyme differ from the others described in the table?'
Why is HaeIII poorly suited for recombinant plasmid construction compared to the other enzymes in the table?
HaeIII cuts straight across DNA to produce blunt ends, whereas the others produce staggered cuts with cohesive sticky ends.
What is Conclusion Question 3 in Activity 1.4.2?
'What molecular tools do scissors and tape represent in this activity? Explain.'