1/43
Vocabulary flashcards covering common laboratory equipment and standard laboratory safety protocols.
Ring stand
A metal stand that supports the Bunsen burner, iron ring, pipestem triangle, and other items, often while heating a substance.
Pipestem triangle
A triangular wire and ceramic frame used to support a crucible when it is being heated over an open flame.
Evaporating dish
A ceramic dish used to evaporate excess solvents to create a more concentrated solution.
Test tubes
Narrow cylindrical glass containers used to hold small amounts of liquids for mixing or heating.
Beaker
A wide cylindrical container used for holding water and heating liquids.
Erlenmeyer flask
A narrow-mouthed container used to transport, heat, or store substances; often used when a stopper is required.
Volumetric flask
A flask calibrated to contain a precise volume at a particular temperature; used for precise dilutions and creating standard solutions.
Watch glass
A shallow, concave glass dish used to keep liquid contents in a beaker from splattering.
Mortar & pestle
A heavy bowl and handheld club-like tool used to grind chemicals into powder.
Iron ring
A circular metal ring that attaches to a ring stand to support a beaker over a Bunsen burner, usually with wire gauze placed on top.
Utility clamp
A clamp used to hold a test tube or other piece of equipment securely in place on a ring stand.
Wire gauze
A flat sheet of metal mesh used for suspending glassware over a Bunsen burner to distribute heat.
Tongs
A metal tool used to transport hot beakers and to remove lids from crucibles.
Triple-beam balance
A mechanical balance used for obtaining the mass of an object.
Test tube clamp
A spring-loaded clamp used to hold a test tube while heating its contents.
Bunsen burner
A gas-fueled burner used for heating flame-safe contents in the laboratory.
Forceps
Small handheld tweezers used in dissection to grasp tissues or pick up small items.
File
A textured metal rod used to grind down materials or sharpen items.
Wire brush
A bristled brush used to clean the inside of test tubes or graduated cylinders.
Test tube rack
A stand used for holding many test tubes filled with chemicals or for drying them after washing.
Funnel
A cone-shaped utensil used to pour liquids into containers with small openings, or to hold filter paper.
Scoopula
A curved metal scoop used for scooping solid chemicals and powders.
Graduated cylinder
A tall, narrow calibrated cylinder used for measuring specific amounts of liquids (such as 65mL).
Spatula
A flat-bladed tool used for measuring and removing small amounts of solids or powders, often when obtaining mass.
Wash bottle
A squeezy squeeze bottle with a nozzle used to wash down specific pieces of equipment with water or keep materials moist.
Micropipets
Instruments used to measure and dispense very small, precise amounts of liquids (such as 0.5mL).
Buret
A graduated glass tube with a stopcock used for measuring specific amounts of liquids (such as 13mL), determining required acid/base volumes, and releasing small amounts into solutions.
Dropper
A simple bulb-operated glass or plastic tube used to obtain small amounts of liquids when precision is not required.
Thermometer
An instrument used to measure temperature.
Pipet
A slender calibrated tube used to measure and dispense small amounts of liquids (such as 1mL).
Well plate
A flat plate with multiple small wells used for mixing very small amounts of chemicals together and comparing the results.
Corks
Stoppers used to seal or close flasks or test tubes.
Hot plate
An electrical heating device that provides consistent heat and is used to heat substances that may be flammable.
Florence flask
A laboratory flask with a round body and flat bottom used to hold and heat liquids.
Safety goggles
Protective eyewear worn to protect the eyes from flying objects and chemical splashes; they should never be removed while inside the laboratory.
Acid spill protocol
The procedure of diluting the spilled acid with water, wiping it up, and then rinsing the surface with additional water.
Sharps box
A designated disposal container for broken laboratory glass swept up following a breakage.
Stock bottle transfer procedure
The laboratory safety technique of pouring chemicals from a large stock container into an intermediate smaller container before transferring into the final reaction vessel.
Nitrile gloves
Protective handwear that should be worn when handling room-temperature chemicals and glassware, but removed before typing on computers or leaving the lab.
Excess reagent protocol
The procedure of removing excess weighed chemical using a spatula and placing it into the designated waste container, never returning it to the original stock container.
Safety shower / Fire blanket protocol
Emergency procedures used immediately if clothing catches fire: dousing under the safety shower or wrapping and rolling in a fire blanket.
Eyewash station procedure
An emergency response protocol requiring a student to rinse their eyes at the eyewash station for 15minutes if a chemical enters them, followed by alerting the TA.
Base exposure symptom
The slippery sensation felt on the skin upon touching a basic solution, which requires immediately rinsing the hands with water and notifying the TA.
Spandex lab hazard
The severe risk associated with synthetic athletic wear that will melt directly to human skin when exposed to laboratory flames or heat sources.