1/43
Looks like no tags are added yet.
What equipment is required for flight?
ATOMATOFLAMES: Airspeed indicator, Tachometer, Oil pressure gauge, Altimeter, Magnetic compass, Oil temperature gauge, Fuel quantity gauges, Landing gear indicator (if applicable), Anti-collision lights, Position lights, and Source of electrical energy.
What are the three position lights?
Red on the left wing, green on the right wing, and white on the tail.
What is the purpose of anti-collision lights?
To make the aircraft more visible to other aircraft.
What are landing lights used for?
To help see the runway and make the aircraft more visible.
What are taxi lights used for?
To help see while taxiing.
What are the cloud clearance requirements in Class B?
3 statute miles visibility and clear of clouds.
What are the cloud clearance requirements in Class C, D, and E below 10,000 MSL?
3 statute miles visibility; 500 feet below, 1,000 feet above, and 2,000 feet horizontally from clouds.
What are the cloud clearance requirements in Class E at or above 10,000 MSL?
5 statute miles visibility; 1,000 feet below, 1,000 feet above, and 1 statute mile horizontally from clouds.
What are the cloud clearance requirements in Class G at or below 1,200 AGL during the day?
1 statute mile visibility and clear of clouds.
What are the cloud clearance requirements in Class G at or below 1,200 AGL at night?
3 statute miles visibility; 500 feet below, 1,000 feet above, and 2,000 feet horizontally from clouds.
What are the cloud clearance requirements in Class G above 1,200 AGL and below 10,000 MSL during the day?
1 statute mile visibility; 500 feet below, 1,000 feet above, and 2,000 feet horizontally from clouds.
What are the cloud clearance requirements in Class G above 1,200 AGL and below 10,000 MSL at night?
3 statute miles visibility; 500 feet below, 1,000 feet above, and 2,000 feet horizontally from clouds.
What are the cloud clearance requirements in Class G at or above 10,000 MSL?
5 statute miles visibility; 1,000 feet below, 1,000 feet above, and 1 statute mile horizontally from clouds.
What is a stall?
A stall occurs when the wing exceeds its critical angle of attack and loses lift.
What are the four forces of flight?
Lift, weight, thrust, and drag.
What inspection is required every 12 calendar months?
An annual inspection.
When is a 100-hour inspection required?
When the aircraft is used for hire or flight instruction for hire, subject to applicable exceptions.
How often must the transponder be inspected?
Every 24 calendar months.
How often must the ELT be inspected?
Every 12 calendar months.
How often must the VOR be checked for IFR use?
Every 30 days.
When is a preflight inspection required?
Before every flight.
What documents must be onboard the aircraft?
ARROW: Airworthiness certificate, Registration, Radio license (international flights), Operating limitations, and Weight and balance information.
What is Vs?
Stalling speed.
What is Vso?
Stalling speed in landing configuration.
What is Vx?
Best angle of climb speed.
What is Vy?
Best rate of climb speed.
What is Va?
Maximum operating maneuvering speed.
What is Vfe?
Maximum flap extending speed.
What is Vne?
Never-exceed speed.
What is Vno?
Maximum structural cruising speed.
What is a runway incursion?
An incorrect presence of an aircraft, vehicle, or person on a runway that creates a collision hazard.
What should you know about an engine fire during start?
Know the engine-fire-during-start procedure from your aircraft's POH.
What does the first part of a METAR tell you?
The airport identifier and observation date/time.
What does the wind group in a METAR tell you?
Wind direction and speed.
What does the visibility group in a METAR tell you?
Visibility in statute miles.
What does the cloud group in a METAR tell you?
Cloud coverage and cloud height.
What does the temperature/dewpoint group tell you?
Temperature and dewpoint in Celsius.
What does the altimeter group in a METAR tell you?
Altimeter setting in inches of mercury.
What instruments use the pitot-static system?
Airspeed indicator, altimeter, and vertical speed indicator.
What instruments and equipment use electrical power?
PFD, engine instruments, COM 1, NAV 1, standby instruments, audio panel, and avionics lighting/dimming, according to the POH.
What does an airport beacon look like for a civilian land airport?
Flashing white and green.
What does an airport beacon look like for a military airport?
Flashing white and green, with two flashes of green.
What does an airport beacon look like for a heliport?
Flashing green, yellow, and white.
What does an airport beacon look like for a water airport?
Flashing white and yellow.