Pope John Bridge Project - Structural Engineering and Bridge Design Vocabulary

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/55

flashcard set

Earn XP

Description and Tags

A comprehensive vocabulary review set of 120 terms covering civil and structural engineering terminology, bridge anatomy, truss mechanics, structural analysis concepts, materials, and construction project management.

56 Terms

1
New cards

Owner

One of the four key players in the Project Team, who identifies the need for the project, provides funding, puts together the Project Team, and establishes the project requirements.

2
New cards

Yield Strength

the internal member force at which yielding occurs

3
New cards

Yield Point

the point on a load-deformation curve at which yielding begins

4
New cards

Yielding

the phenomenon that occurs when a ductile material undergoes very large plastic deformations with little change in load

5
New cards

Optimize

to maximize the efficiency of a design, generally a structural design is optimized by minimizing its cost without compromising its safety

6
New cards

Pier

A foundation element that supports a bridge in the middle of a span.

7
New cards

Pile

A component of a structural foundation consisting of a long steel or concrete shaft driven downward through weak soil into stronger soil or rock.

8
New cards

Pinned Connection

A type of connection that uses a single large metal pin to join two or more structural members together.

9
New cards

Plans and Specifications

The products of the design process, created by the Design Professional, where plans are drawings and specifications are highly detailed written descriptions of every aspect of the project.

10
New cards

Plastic Deformation

The permanent elongation of a material under load, occurring after a material has yielded.

11
New cards

Pony Truss

A truss configuration for which the deck is located at (or slightly above) the level of the bottom chord, appearing similar to a through truss but lower and without struts or lateral bracing between the top chords.

12
New cards

Portal Bracing

An assembly of struts and diagonal bracing members that connects the end posts of a through truss bridge together to prevent the two main trusses from falling over sideways.

13
New cards

Procurement

A phase of the design process in which a Constructor is selected and construction materials are purchased for the project.

14
New cards

Project Manager

One of the four key players in the Project Team who has overall responsibility for managing both design and construction, representing the Owner in scheduling, financial management, and construction quality.

15
New cards

Project Team

A team of specialists brought together to design and build a facility, whose principal members are the Owner, the Design Professional, the Constructor, and the Project Manager.

16
New cards

Pythagorean Theorem

A mathematical relationship between the lengths of the sides of a right triangle and the length of the hypotenuse, expressed as a2+b2=c2a^2 + b^2 = c^2.

17
New cards

Quality Control

The process of routinely inspecting and testing materials and workmanship on a project and taking corrective action when problems are found.

18
New cards

Reaction

A force developed at a support to keep the structure in equilibrium.

19
New cards

Required Strength

The actual strength a member must have to carry load safely, calculated in structural design by multiplying the factor of safety by the internal member force.

20
New cards

Reinforced Concrete

Concrete that has been strengthened for structural applications by embedding steel reinforcing bars inside it before it cures, compensating for the low tensile strength and low ductility of plain concrete.

21
New cards

Right Triangle

A triangle with one of its three angles measuring exactly 90∘90^\circ.

22
New cards

Rupture

A failure mode that occurs when a member subjected to a tension force physically breaks into two pieces.

23
New cards

Schedule

A tabular listing of members, connections, or other components of a structural design, normally provided as part of the plans and specifications for a project.

24
New cards

Shop Drawings

Detailed drawings of every component that will be part of a completed structure, normally prepared by the Constructor and approved by the Design Professional.

25
New cards

Sine

A trigonometric function of an angle, abbreviated as "sin", calculated in a right triangle by dividing the length of the opposite side by the length of the hypotenuse.

26
New cards

Spread Footing

A type of foundation consisting of a flat slab of concrete placed directly on firm soil or rock.

27
New cards

Stable

A rigid structural configuration in which no member or members can move or rotate freely, generally achieved in a truss when it is composed entirely of interconnected triangles.

28
New cards

Statically Determinate

A structural configuration that can be analyzed using the equations of equilibrium alone; only these trusses can be analyzed with the Method of Joints.

29
New cards

Statically Indeterminate

A structural configuration that cannot be analyzed using the equations of equilibrium alone and cannot be analyzed with the Method of Joints.

30
New cards

Steel Fabricator

A member of the Construction Team that specializes in prefabricating steel structural members and connections before delivery by cutting components to size, drilling or punching bolt holes, and forming subassemblies.

31
New cards

Strength

The largest internal force that a structural component can experience before it fails.

32
New cards

Structural Analysis

A mathematical examination of a structure to determine its reactions, internal member forces, and deflections.

33
New cards

Structural Engineer

A civil engineer with special expertise in structural analysis and design.

34
New cards

Structural Model

A mathematical idealization of a structure, including a series of simplifying assumptions about configuration and loading that allow its behavior to be predicted mathematically.

35
New cards

Strut

A structural member that connects the two main trusses together on a truss bridge, working with lateral bracing to resist lateral loads and prevent top chords from buckling sideways.

36
New cards

Subcontractor

A company hired by a construction contractor to perform a specialized part of a construction project.

37
New cards

Subsystem

A part of a larger system; for a truss bridge system, subsystems include the deck, main trusses, lateral bracing, foundations, and approaches.

38
New cards

Support

A point at which a structure is physically in contact with its surroundings.

39
New cards

Tensile Strength

The maximum tension force a member can carry before it fails.

40
New cards

Tension

An internal force that tends to make a structural member longer.

41
New cards

Through Truss

A truss configuration for which the deck is located at the level of the bottom chord, higher than a pony truss, with struts and lateral bracing connecting the top chords together.

42
New cards

Trigonometry

The mathematical study of the properties of triangles.

43
New cards

Truss

A structure composed of members connected together to form a rigid framework, primarily carrying loads in tension and compression.

44
New cards

Top Chord

A type of structural member used along the top edge of a truss.

45
New cards

Type Study

A report prepared by the Design Professional for the Owner that describes alternative bridge design configurations and explains the advantages and disadvantages of each one.

46
New cards

Unstable

A structural configuration that cannot carry load because one or more members can move or rotate without restraint, generally occurring when a truss is not made entirely of interconnected triangles.

47
New cards

Ultimate Strength

The absolute maximum internal force a member can carry in tension before it fails.

48
New cards

Vector

A quantity that has both magnitude and direction.

49
New cards

Vertical

A type of structural member positioned vertically in a truss framework.

50
New cards

Yielding

The phenomenon that occurs when a ductile material undergoes very large plastic deformations with little change in load.

51
New cards

Yield Point

The point on a load-deformation curve at which yielding begins.

52
New cards

Yield Strength

The internal member force at which yielding occurs.

53
New cards

Plans

Drawings created by the Design Professional as one half of the plans and specifications for a project.

54
New cards

Specifications

Highly detailed written descriptions of every aspect of a project, created by the Design Professional as part of the plans and specifications.

55
New cards

Construction Team

The project group responsible for the physical execution of a facility, which includes the construction contractor, subcontractors, and the steel fabricator.

56
New cards