1/303
Looks like no tags are added yet.
Hierarchy of Fibers
Fiber → Yarn → Textiles
Fiber
The fundamental unit of raw textile materials, defined as having a length at least 100 times greater than its diameter
Direct transfer of fiber
Direct contact transfers fiber from sspect/garment to victim/object (A → B)
Secondary transfer of fiber
Fibers transfer from an object to an individual, who then inadvertently transfers them to a third person or new scene (A → B → C)
Critical time decay of fiber
Approximately 95% of transferred fibers fall off or are lost within 24 hours. Rapid evidence recovery is imperative
Contamination control of fibers
First responders no longer shroud decedents in cotton bedsheets, as shed cotton fibers would contaminate trace evidence
Yarn (Thread)
Produced when short or continuous fibers are spun, twisted, or grouped. Can be thick or thin, loose or tight
Twist Direction
Forensic analysts evaluate whether a yarn has an S-twist (spirals downward to the left) or a Z-twist (spirals downward to the right)
Textile
A flat, flexible sheet made by interlacing yarns through weaving or knitting
Types of Fiber Evidence in Terms of Admissibility in Court
Inclusive, exclusive, and inconclusive in comparison
Inclusive Fiber
Questioned and known control fibers exhibit identical chemical, physical, and optical properties
Exclusive Fiber
Ambiguous differences in morphology, chemical polymer base, or dye formulations eliminate the suspect source
Inconclusive Fiber
Insufficient sample mass, environmental contamination, or conflicting properties prevent a definite match
Scientific Working Groups for Materials (SWGMAT) and Organization of Scientific Area Committees (OSAC)
Groups that have improved protocols and guidelines for the examination and analysis of fibers and the examination of the equipment used to analyze the fiber
The American Society of Trace Evidence Examiners (ASTEE)
A Group that publishes yearly guidelines, best practice workshops, and updated standards for the forensic community of fiber examiners
Fiber Classifications
Natural and synthetic fibers
Natural Fibers
Comes from animals, plants, or minerals that are mined from the ground, composed of polymers or long, repeating smaller molecules called monomers
Animal Fibers
Made of proteins such as keratin. Not considered to be a woven textile
Three types of fibers animals provide
Hair, fur, and silk spun by silkworms
Examples of Animal Fibers
Wool, cashmere/mohair, angora, camel/alpaca/llama, and silk (hair/fur)
Use of wool
Warm clothing and blankets
Use of fur
Coats and gloves
Use of silk
Smooth/gloosy clothing
Plant Fibers
Composed of cellulose polymers (repeating glucose units); resistant to harsh chemicals; dissolved by strong acids. Can be thick and stiff or smooth, fine, and flexible. Becomes brittle over time. Amorphous, loosely arranged, soft, elastic, and absorbent
Use of cotton
Everyday textiles
Use of coir
Doormats and baskets (water-resistant)
Use flax/linen
Cool clothing, table linens
Use of jute/hemp/sisal
Ropes, twines, bags, and mats
Types of plant fibers
Seed, fruit, stem, and leaf
Seed Fiber
The most common plant fiber used in textiles is found in the seedpod of a cotton plant
Fruit Fiber
Coir fibers are narrow, with thick walls made of cellulose, and when woven together, they are stronger than flax or cotton. Relatively waterproof
Stem Fibers
Grow in bundles and are separated from the stem and beaten, rolled, and washed until they separate into single fibers. Very smooth and often shiny; they resist wear and feel cool in hot weather
Leaf Fibers
Extracted from leaves, composed of many fiber cells bound together thatt can reach a length of 10 feet
Mineral Fibers
Inorganic minerals (silicates, non-polymeric crystalline lattice). Not very long, weak, and brittle
Examples of mineral fibers
Fiberglass and asbestos
Fiberglass
Very fine and easily sticks to skin, often causing an itchy skin rash
Asbestos
Crystalline structure composed of long, thin, needle-like fibers that are no longer commonly used
Synthetic fibers
Manufactured by polymerizing monomers in large vats and forcing the viscous polymer through tiny holes called spinnerets. Solid, hollow, twisted, and pitted on the surface. May be translucent or clear
Spinnerets
Small holes in vats that determine the fiber's shape
Two classifications of synthetic fibers
Regenerated and synthetic polymer
Regenerated Fibers
Chemically modified cellulose polymers (plant-derived) that imitate natural fibers and generally are smooth and silky in appearance
Nylon
When cellulose is combined with three acetate units
Examples of regenerated fibers
Rayon, Capron
Examples of synthetic polymer fibers
Acrylic (artificial wool) and olefin
Synthetic Polymer Fibers
Non-cellulose, 100% petroleum-derived synthetic polymers with no definite shape or size that are easily dyed
Cotton Fiber
- Source: Plant
- Characteristics: Flattened, twisted ribbon appearance
- Composition: Cellulose polymer
Linen Fiber
- Source: Plant
- Characteristics: Short, brittle fibers but longer than cotton
- Composition: Cellulose polymer
Jute and Hemp fiber
- Source: Plant
- Characteristics: Dense and strong
- Composition: Cellulose polymer
Manila fiber
- Source: Plant leaves
- Characteristics: long fibers; quickly deteriorates
- Composition: Cellulose polymer
Wool fiber
- Source: Animal
- Characteristics: Helix-shaped and springy
- Composition: Polymer of keratin
Silk fiber
- Source: Silkworm cocoon
- Characteristics: Triangular and reflects light
- Composition: Protein fiber
Asbestos fiber
- Source: Mineral
- Characteristics: Long, thin, weak, and brittle
- Composition: Silicate minerals
Manufactured fiber
- Source: Regenerated polymer
- Characteristics: Melts at a lower temperature than natural fibers
- Composition: Varies
Weave Pattern
A pattern in which the weft passes over and under the warp fibers
Weft
Horizontal filling yarns that run crosswise from side to side in a woven fabric
Warp
Vertical yarns held under tension on a loom that act as a foundational backbone for a woven textile
Type of weave patterns
Plain (tabby), basket, twill, satin, and leno
Plain (Tabby Weave 1/1)
- Pattern: Alternating over one, under one
- Traits: Checkerboard appearance; firm, snag-resistant; low tear strength; wrinkles easily
Basket Weave (2/2)
- Pattern: Two weft yarns pass over and under two warp yarns
- Traits: Porous, open weave; wrinkle-resistant; loose structure easily distorts or shrinks
Twill Weave (3/1)
- Pattern: Weft passes over three or more wraps, under one, shifting by one thread each row
- Traits: Distinct diagonal surface texture; different appearance on the front versus back face (standard in blue denim jeans); durable and compact
Satin Weave (3/1, 4/1, 5/1 or greater)
- Pattern: Weft passes under multiple wraps and over one; long yarn floats across the surface
- Traits: Very glossy, smooth, high light reflectance; fragile and prone to snagging
Leno Weave
- Pattern: Two adjacent warp yarns cross over one another while the weft passes through
- Traits: Mesh-like, open weave; stretches in one direction only
Thread Count
Warp Threads (per inch) + weft threads (per inch)
Effective Thread Count
(Warp + weft) x ply factor
Tools to collect fibers in the field or laboratory
Stick tape lifts, forensics forceps, evidence vacuums fitted with specialized filters, and sticky lint rollers
Packaging of Single Fibers as Evidence
Mount on clean paper sheets, fold into a paper fold, and seal in evidence envelopes
Packaging of entire garments as evidence
Layered or rolled flat within clean butcher paper to preserve trace transfers, then secured in sealed evidence bags
Packaging of large Immobile surfaces as evidence
Packaged securely and transported directly to the crime laboratory
Steps of analyzing fiber evidence
- The first task is to examine the type
- Examine the color and shape
Microscopic Analysis
A microscope is used to distinguish natural fibers, such as wool, cotton, or silk
Optical Stereomicroscopy & Polarized Light Microscopy (PLM)
Examines morphology, scales, twist, spinneret cross-section, and color. NON DESTRUCTIVE
Chemical Analysis of fiber
The method of identifying the polymer composition, additives, and dyes of natural or synthetic textile materials using chemical, spectroscopic, and chromatographic techniques
Gas Chromatography
A process in which a tiny sample of a fiber is dissolved in a solvent; then, using a syringe, the fiber solution is injected into a heated chamber. The fiber solution vaporizes into gases and is transported by a carrier gas helium or hydrogen) through a column (tube). DESTRUCTIVE to the fiber
Mass Spectrometry
A method of identifying fibers that involves heating and vaporizing a fiber sample, where the charged particles are separated by mass and charge within a magnetic field. Some particles will be attracted, and some will deflect. A detector records an output graph as a series of peaks of the molecular components, providing a molecular fingerprint of the fiber found in the sample
Questions a forensic scientist will ask when it comes to fiber evidence
Type, color, number, location found (secondary transfer), textile that it originated from, multiple transfers, type of crime committed, time between crime and discovery of it
Type of fiber Question
What is the composition of the fiber? How common or rare is it? What suspects, victims, or parts of the crime scene had this type of fiber?
Fiber color question
Are the fibers from the suspect's clothes consistent with the colors of the fibers found on the victim? Is the type of dye the same?
Number of fibers found question
How many fibers were found—one or hundreds? More fibers suggest violence or a longer period of contact
Where the fiber was found (secondary transfer) question
How close can you place the suspect to the scene of the crime—in the house or close to a victim's body?
Textile from which the fiber originated question
Are these carpet fibers or upholstery from a car?
Multiple fiber transfers question
Is there only one type of fiber transferred at the crime scene, or are there fibers from numerous sources such as carpets, clothes, and bedding? More sources suggest longer contact or possible violence
Type of crime committed (fiber related)
Was it a violent crime, a break-and-enter, or a kidnapping? Each type of crime has an expected pattern of contact among the suspect, victim, and crime scene that will be reflected in the transfer of fibers
Time between crime and discovery of fiber question
How long ago did the transfer take place—an hour, a day, a week? Unless the fiber location is undisturbed (such as a bagged jacket or locked room), the value of found fiber is greatly reduced with the passage of time because fibers not related to the crime can be easily transferred to the evidence
MSP
A new nondestructive technique that combines microscopy with UV and visible light spectroscopy, capable of analyzing very small samples. Measures how UV light affects fabric discolorationa nd cabe used in trying to find consistency between samples found on victims and suspects
Fourier Transform Infrared Analysis (FTIR)
A nondestructive test that uses selective absorption of a wavelength of light to identify molecular groups found within the fiber
Ancient Civilizations of Fingerprints
- For thousands of years, humans used fingerprints as personal identification markings
- Ancient Babylonians pressed fingerprints into clay tablet contracts between 1792 and 1750 B.C.
- In ancient China (dating back to the third century B.C.), linked fingerprints and palm prints were pressed into clay writing surfaces to authenticate official documents, legal loans, contracts, and seals
Dr. Nehemiah Grew (1684)
Authored the earliest Western paper describing hand patterns, friction ridges, and pores observed under a microscope
Jan Evangelist Purkinje (1823)
Described and classified nine distinct fingerprint patterns, including loops, spirals, circles, and double whorls
Johann Christoph Andreas Mayer (1788)
Formulated that the arrangement of skin ridges is never duplicated between two individuals
Alphonse Bertillon (1879/1883)
Developed Bertillonage, an identification system based on a detailed set of physical body measurements used to identify repeat criminal offenders
Bertillonage
An identification system based on a detailed set of physical body measurements used to identify repeat criminal offenders
Sir Edmund Richard Henry (1896)
Established a system grouping fingerprint records into arches, whorls, and loops. He introduced the ten-print card, recording all 10 fingerprints of an individual with their unique characteristics
Ten Print Card
Records all 10 fingerprints of an individual with their unique characteristics
Manual Searching (1987)
By this year, the FBI maintained over 23 million criminal fingerprint cards, requiring slow manual comparisons by human examiners
IAFIS (Integrated Automated Fingerprint Identification System) (1999)
Introduced automated digital searches, latent print searches, electronic storage, and digital exchange of fingerprint files
NGI (Next Generation Identification)
Replaced and upgraded IAFIS, providing enhanced automated searches, mobile identification, palm and hand edge prints, and multi-biometric integration (such as facial recognition and iris scans)
Fingerprints
Are impressions made by the papillary ridges on the ends of fingers and thumbs
Dactyloscopy
The scientific study of fingerprints for personal identification
Dermal or Friction Ridges Definition
Raised units of skin on fingertips, palms, and feet
Dermal or Friction Ridges Characteristics
- Improve our physical grip on handled objects
- Tips of the fingers contain hundreds of microscopic sweat pores located along these
- When skin presses against a surface, natural secretions from sweat glands along the pores are transferred in the pattern
- Because an individual's arrangement is unique and permanent, fingerprints are classified as individual evidence