1/30
Looks like no tags are added yet.
What are thermoset polymers?
Polymers that form permanent cross
What are the two early thermoset plastics?
Phenol formaldehyde (Bakelite), the first man
How do thermoset resin systems cure?
Resin and hardener are mixed together, initiating a chemical cross
What are the key characteristics of thermosets?
Cannot be remelted after curing, have good heat resistance and often require simpler processing equipment
What is compression molding?
Premeasured and often preheated material is placed in an open mold, then heat and pressure are applied until it fills the mold and cures
What is thermoset injection molding?
Heated resin is injected into a mold, where it cross
How do compression and injection molding compare?
Injection molding has faster cycle times and suits high
What are the characteristics of injection molding?
High tooling cost, low part cost and high production rate
What is foam molding?
Expanding resin fills a mold to create foam products such as furniture, mattresses and automotive seats
What is reaction injection molding (RIM)?
Two liquid components are mixed and injected into a mold, where they react and cure; used for large automotive parts
What is transfer molding?
Preheated material is placed in a separate chamber and forced through channels into a closed mold, allowing tight tolerances
What is the difference between compression and transfer molding?
Compression places material directly in the mold cavity; transfer forces material from a separate chamber into the mold
What is resin transfer molding (RTM)?
Dry reinforcing fibers are placed in a closed mold, liquid resin is injected and the composite cures
What are the characteristics of RTM?
High part cost, low tooling cost, low production rate and high
What are casting and rotational casting used for?
Producing molded or hollow shapes without requiring significant pressure
What is sintering?
Polymer particles are heated until they bond together through coalescence
What is vulcanization?
Applying heat and pressure to rubber to create cross
What is the difference between thermoset and thermoplastic processing?
Thermosets cure permanently and cannot be remelted; thermoplastics soften when heated and can be reshaped
What is a composite material?
Two or more materials combined to produce properties superior to those of the individual materials
What are the matrix and reinforcement in a composite?
The matrix holds the composite together; reinforcement improves properties such as strength and stiffness
What are continuous and discontinuous reinforcements?
Continuous fibers extend through the material; discontinuous reinforcements are shorter fibers, flakes or particles
What are the main forms of composite reinforcement?
Laminar layers, woven fibers, flakes and particles
What is the difference between thermoplastic and thermoset composite matrices?
Thermoplastic matrices can be reheated and reshaped; thermoset matrices cure through cross
What are the key properties and uses of phenolic and urea/melamine resins?
Phenolic is hard and rigid with good electrical insulation; urea and melamine are used in particleboard and furniture
What are the key properties of epoxy resin?
High strength, low viscosity and low shrinkage during curing
What are the properties and applications of polyester resin?
Lower cost and slightly lower strength than epoxy; widely used with glass fibers in boats and tanks
What are common composite reinforcement materials?
Paper and cotton for laminates; aluminum honeycomb for lightweight structures; Kevlar and Nomex for heat resistance; carbon fiber for high strength; glass fiber for general reinforcement
What are E
glass and S
What is hand lay
up?
What are filament winding and pultrusion?
Filament winding wraps fibers around a rotating mandrel; pultrusion pulls reinforcement through a resin bath and forming die
What are the main composite manufacturing processes?
Hand lay