1/30
Vocabulary review flashcards defining core terms, laws, principles, components, and concepts from the IB MYP 5 Electricity and Circuits revision notes.
Static electricity
Electric charges that are not free to move and are held by a charged object.
Electrostatic charge
A property of an object that causes it to attract or repel other objects with charge.
Positive charge
The type of electric charge carried in the nucleus of an atom.
Negative charge
The type of electric charge carried by an electron.
Neutral object
An uncharged object with equal amounts of positive and negative charge.
Conductors
Materials that allow electrons to pass through because they contain free electrons between atoms.
Insulators
Materials in which electrons are held tightly to their atoms and are not free to move, preventing them from conducting electricity.
Semiconductors
Materials that are neither conductors nor insulators; they are poor conductors when cold but become much better conductors when warm.
Electric field
The region or space where an electric charge experiences a force due to other charges.
Uniform electric field
An electric field where the electric force is the same everywhere in a region, such as between two oppositely charged parallel metal plates.
Coulomb’s law
A law stating that the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them (F=r2k∣Q1Q2∣).
Electric field strength
The electric force acting per unit charge (E=qF).
Conservation of charge
The principle stating that the total electric charge of an isolated system never changes, as charge cannot be created or destroyed.
Electric current
The rate of flow of electric charge around a closed circuit (I=tQ).
Conventional current
The flow of electric charge from the positive (+) terminal to the negative (−) terminal in the external circuit.
Electron flow
The actual movement of electrons from the negative (−) terminal to the positive (+) terminal.
Potential difference (p.d.)
The energy transferred per unit charge across a component, which provides the driving effect that pushes charge around a circuit (1V=1J/C).
Electromotive force (e.m.f.)
The total energy supplied per unit charge by an energy source, such as a cell or battery.
Resistance
A property that opposes the flow of electric charge or current in a circuit, converting electrical energy into thermal energy.
Ammeter
An instrument connected in series with a component or circuit section to measure electric current.
Galvanometer
An instrument used to measure very small or tiny electric currents.
Voltmeter
An instrument connected in parallel across a component to measure potential difference (voltage).
Ohm’s law
A law stating that for a conductor at constant temperature and other physical conditions, current is directly proportional to potential difference (V=I×R).
Variable resistor (rheostat)
A component that alters resistance in a circuit to control current, such as controlling speaker volume.
NTC thermistor
A temperature sensor whose resistance decreases as temperature increases.
PTC thermistor
A temperature sensor whose resistance increases as temperature increases, often used for protection against overheating.
Light-dependent resistor (LDR)
A sensor whose resistance decreases as light intensity increases, commonly used in automatic streetlights.
Fuse
A safety device that protects a circuit by melting and breaking the circuit when too much current flows.
Series circuit
A circuit configuration where components are connected along a single loop with no branches, keeping the current identical at every point.
Parallel circuit
A circuit configuration where components are connected across separate branches, providing the full source voltage across each branch.
Electrical power
The rate at which energy is transformed in a circuit, defined by P=I×V or P=tE.