6.1 HAAS CONTROL KEYPAD & SCREEN - BASIC MILL OPERATOR

2.0(1)
Studied by 12 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/13

flashcard set

Earn XP

Description and Tags

Aerospace Engineering

University/Undergrad

Last updated 2:26 AM on 10/13/22
Name
Mastery
Learn
Test
Matching
Spaced
Call with Kai

No analytics yet

Send a link to your students to track their progress

14 Terms

1
New cards
The Haas Control is the computer system that runs the Haas machine.
True
2
New cards
The Reset key does the following:
Clears alarms, clears text, and resets the control for machine operation
3
New cards
Any time you have pressed the E-Stop button, you will need to rotate it clockwise to disengage it, and then press Reset to exit the E-Stop state and reset the machine.
True
4
New cards
When you start the machine, pressing the Power Up key does what?
Zero returns the axes and gets the control ready to go
5
New cards
If the machine gets interrupted during a tool change, the machine cannot run until the tool change is completed. Pressing the Recover key allows the machine to complete the tool change, and return the tool changer to Home position.
True
6
New cards
One of the tool release buttons is located on the control keypad. The other tool release button is located:
Right above the spindle and coolant line, on the spindle head cover
7
New cards
The Display and Mode section of the control keypad is what you see in the upper two quadrants of the display screen on the control.
True
8
New cards
The first button to review in the Display section is the Program Button. This button shows the operator:
Information related to the Active Program that is loaded into Memory, and visible in the upper left side of the control window
9
New cards
The Offset button ___________?
Opens a window that contains your work and tool offsets in the control screen
10
New cards
The 4 keys to the right of the Mode keys control what you can do within each of the Mode keys.
True
11
New cards
When you have chosen the Handle Jog button, the suggested button (increment) for axis movement is:
0.001
12
New cards
The speed of the axis movement when using the Jog Lock key is controlled by the last increment key that was pressed in the Hand Jog Mode section.
True
13
New cards
The last quadrant of the Control Keypad discussed in the video was the Override Section.This section is important for both the Operator and the setup person.
True
14
New cards
The Operator can use the keys in the Spindle and Axis Override Section whenever he/she wants.
False