Application of Mass and Energy Conservation: Turbines, Compressors, Expansion Valves, and Heat Exchangers

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/12

flashcard set

Earn XP

Description and Tags

Vocabulary practice flashcards covering steady-state mass and energy conservation principles applied to turbines, compressors, throttling expansion valves, and heat exchangers.

13 Terms

1
New cards

Turbine

A machine in which the energy of a working fluid is converted into mechanical work (shaft work, W˙shaft\dot{W}_{shaft}), resulting in a decrease in fluid enthalpy from inlet to exit.

2
New cards

Compressor

A machine where mechanical energy (shaft work, W˙shaft\dot{W}_{shaft}) is supplied to a working fluid to increase its pressure and specific enthalpy.

3
New cards
<p>Turbine and Compressor Energy Flow Schematics</p>

Turbine and Compressor Energy Flow Schematics

Control volume diagrams illustrating a turbine producing shaft work (W˙shaft\dot{W}_{shaft} directed outward) and a compressor consuming shaft work (W˙shaft\dot{W}_{shaft} directed inward), along with their mass and enthalpy flow rates (m˙hi\dot{m}h_i and m˙he\dot{m}h_e).

4
New cards

Turbine Shaft Power Equation

Under steady flow, well-insulated conditions, and negligible potential and kinetic energy changes: W˙shaft=Ł(hi−he)\dot{W}_{shaft} = Ł(h_i - h_e), where hih_i and heh_e denote inlet and exit specific enthalpies.

5
New cards

Compressor Shaft Power Equation

Under steady flow, well-insulated conditions, and negligible potential and kinetic energy changes: W˙shaft=Ł(he−hi)\dot{W}_{shaft} = Ł(h_e - h_i), reflecting work done on the fluid.

6
New cards

Expansion Valve (Throttling Valve)

A component in vapour compression refrigeration systems used to regulate evaporator pressure and control the superheat of refrigerant flowing out of the evaporator by restricting fluid flow to cause a pressure drop.

7
New cards

Phase Change Across a Throttling Valve

A phenomenon where a drop in refrigerant pressure causes a corresponding drop in its saturation temperature, often inducing a phase change as fluid flows through the flow restriction.

8
New cards
<p>Thermal Expansion Valve System</p>

Thermal Expansion Valve System

A refrigeration expansion valve mechanism that utilizes a sensing capillary, a sensing bulb, and a pressure equalization line connected to the evaporator exit to regulate refrigerant flow.

9
New cards
<p>Vapour Compression Refrigeration Cycle</p>

Vapour Compression Refrigeration Cycle

A thermodynamic cycle circulating refrigerant through four primary components: compressor (low- to high-pressure vapor), condenser (heat rejection to high-pressure liquid), expansion valve (pressure drop), and evaporator (heat absorption to low-pressure vapor).

10
New cards

Heat Exchanger

A device designed to transfer heat between two flowing fluids without any work interaction occurring between the device and its surroundings.

11
New cards

Indirect Heat Exchanger

A category of heat exchangers (such as tube and plate types) where the hot and cold fluid streams remain physically separated and do not mix during heat transfer.

12
New cards
<p>Straight-Tube Heat Exchanger (Two Pass Tube-Side)</p>

Straight-Tube Heat Exchanger (Two Pass Tube-Side)

A shell-and-tube heat exchanger comprising a straight tube bundle, tube sheets, baffles to direct shell-side fluid flow, and inlet/outlet plenums that direct tube-side fluid through two passes.

13
New cards

Heat Exchanger Energy Conservation Equation

For steady flow through a heat exchanger with negligible kinetic and potential energy changes and no shaft work: Q˙cv+∑m˙ihi=∑m˙ehe\dot{Q}_{cv} + \sum \dot{m}_i h_i = \sum \dot{m}_e h_e, where Q˙cv\dot{Q}_{cv} is the rate of heat transfer entering the heat exchanger.